American Standard W000596547 Spec Sheet

PRINCETON™

RECESS BATH

AMERICAST®BRAND ENGINEERED MATERIAL

PRINCETON RECESS BATH

Americast®brand engineered material

❏ 2391.202 Right Hand Outlet
❏ 2391.202TC Same as above w/tub cover
❏ 2390.202 Left Hand Outlet
❏ 2390.202TC Same as above w/tub cover

• Acid resistant porcelain finish

• Recess bath with integral apron and tiling
flange

• Integral lumbar support

• Beveled headrest

• Full slip-resistant coverage

• End drain outlet

PRINCETON RECESS BATH for Above Floor
Rough Installation

❏ 2392.202 Left Hand Outlet for above floor

installation

❏ 2392.202TC Same as above w/tub cover
❏ 2393.202 Right Hand Outlet for above floor

installation

❏ 2393.202TC Same as above w/tub cover

Nominal Dimensions: 1524 x 762 x 356mm
(445mm for above floor installation)
60" x 30" x 14" (17-1/2” for above floor instal­lation)

Bathing Well Dimensions: 1423 x 635 x 337mm
(56" x 25" x 13-1/4")

Americast®brand engineered material is a
composition of porcelain bonded to enameling
grade metal, bonded to a patented structural
composite.

Compliance Certifications ­Meets or Exceeds the Following Specifications:

• ASME A112.19.4 for Americast Plumbing Fixtures

• ASTM F-462 for Slip-resistant Bathing Facilities

• ANSI Z124.1 Ignition Test

• ASTM E162 for Flammability

• NFPA 258 for Smoke Density

To Be Specified

❏ Color:
❏ Bath Faucet*:
❏ Faucet Finish:
❏ Drain:
❏ Drain Finish:

© 1998 American Standard Inc.

SPS 2391/2390/2392/2393

* See faucet section for additional models available

NOTE: Roughing-in dimensions shown on reverse side of
page.

BV-027

Revised 5/98

PRINCETON™

RECESS BATH

AMERICAST®BRAND ENGINEERED MATERIAL

© 1998 American Standard Inc.

Dimensions of fixtures are nominal and may vary within the range of toler­ances established by ANSI Standard A112.19.4
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided leaflet.

IMPORTANT:

NOTES:

LEFT HAND OUTLET SHOWN, RIGHT HAND REVERSE DIMENSIONS. (2391.202).
SHOWN WITH POP-UP C.D. & O.

REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH FITTING.
CONCEALED PIPING NOT FURNISHED.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH BATH.

▼

229mm x 305mm
(9 x 12) CUTOUT

1524mm

(60)

762mm

(30)

32mm

(1-1/4)

FINISHED

WALL

19mm
(3/4)

FINISHED
WALL

C/L OF DRAIN

197mm
(7-3/4)

ROUGH

FLOOR

356mm

(14)

FINISHED
WALL

362mm

(14-1/4)

48mm

(1-7/8)

SEE FITTING SPECS

FOR DIMENSION

C/L OF

SPOUT

C/L OF

VALVES

C/L OF
SHOWER ARM

346mm

(13-5/8)

25mm
(1)

1651-1981mm

(65-78)

OPTIONAL

70mm

(2-3/4)

117mm

(4-5/8)

1-1/2 N.P.T.

THREADS

1-1/2 O.D.

TAILPIECE

102mm
(4)

64mm

(2-1/2)

305mm

(12)

SEE
NOTE

89mm

(3-1/2)

C/L OF

SUPPLIES

GENERAL SPECIFICATIONS FOR 2390/2391 BATHING POOL

1524 x 762 x 356mm (60 x 30 x 14 In).

50 Kg. (111 Lbs.)

207 Kg. (461 Lbs.)

159 L (42 Gal.)
1067 x 483mm (42 x 19 In.)
1423 x 635mm (56 x 25 In.)

241mm (9-1/2 In.)

179 Kgs./Sq.m (37 Lbs./Sq.Ft.)

6.2

17.9

INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT

3

)

GENERAL SPECIFICATIONS FOR 2392/2393 BATHING POOL

1524 x 762 x 445mm (60 x 30 x 17-1/2 In).

54 Kg. (119 Lbs.)

211 Kg. (469 Lbs.)

159 L (42 Gal.)
1067 x 483mm (42 x 19 In.)
1423 x 635mm (56 x 25 In.)

241mm (9-1/2 In.)

182 Kgs./Sq.m (38 Lbs./Sq.Ft.)

6.2

17.9

INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT

3

)

NOTE: Roughing-in shown for 2390/2391 only. Refer to
installation instruction for 2392/2393 above-floor installation.

PRINCETON™RECESS BATH
WITH INTEGRAL O VERFLOW

AMERICAST®BRAND ENGINEERED MATERIAL

PRINCETON RECESS BATH W/ INTEGRAL
OVERFLOW

Americast

®

brand engineered material

❏ 2390.202 ICH (Chrome Trim)

Left Hand Outlet

❏ 2390.202 ICHTC Same as above

with Tub Cover

❏ 2391.202 ICH (Chrome Trim)

Right Hand Outlet

❏ 2391.202 ICHTC Same as above

with Tub Cover

❏ 2390.202 IPB (Polished Brass Trim)

Left Hand Outlet

❏ 2390.202 IPBTC Same as above

with Tub Cover

❏ 2391.202 IPB (Polished Brass Trim)

Right Hand Outlet

❏ 2391.202 IPBTC Same as above

with Tub Cover

• Lift and turn drain stopper assembly
included with bath

• Escutcheon included and installed on bath

• Acid resistant porcelain finish

• Recess bath with integral apron and tiling
flange

• Integral lumbar support

• Beveled headrest

• Full slip-resistant coverage

• End drain outlet

Nominal Dimensions: 1524 x 762 x 356mm
(60" x 30" x 14")

Bathing Well Dimensions: 1423 x 635 x 337mm
(56" x 25" x 13-1/4")

Americast

®

brand engineered material is a
composition of porcelain bonded to enameling
grade metal, bonded to a patented structural
composite.

Compliance Certifications ­Meets or Exceeds the Following Specifications:

• ASME A112.19.4 for Americast Plumbing Fixtures

• ASTM F-462 for Slip-resistant Bathing Facilities

• ANSI Z124.1 Ignition Test

• ASTM E162 for Flammability

• NFPA 258 for Smoke Density

To Be Specified

❏ Color:
❏ Bath Faucet*:
❏ Faucet Finish:

© 2000 American Standard Inc.

SPS 2390 ICH /2391 ICH /2390 IPB /2391 IPB

* See faucet section for models available

Photograph details integral overflow and drain
assembly. Drain assembly included with bath.

NOTE: Roughing-in dimensions shown on reverse side of
page.

BV-035

Revised 6/00

PRINCETON™RECESS BATH
WITH INTEGRAL O VERFLOW

AMERICAST®BRAND ENGINEERED MATERIAL

© 2000 American Standard Inc.

Dimensions of fixtures are nominal and may vary within the range of toler­ances established by ANSI Standard A112.19.4
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided leaflet.

IMPORTANT:

NOTES:

LEFT HAND OUTLET SHOWN, RIGHT HAND REVERSE DIMENSIONS. (2391.202.ICH).
DRAIN AND OVERFLOW ESCUTCHEON INCLUDED WITH BATH. REFER TO INSTALLA-

TION INSTRUCTIONS SUPPLIED WITH BATH FOR DRAIN INSTALLATION.
BATH FAUCET NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH FITTING.

CONCEALED PIPING NOT FURNISHED.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.

REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH BATH.

▼

48mm

(1-7/8)

362mm

(14-1/4)

762mm

(30)

C/L OF

SUPPLIES

89mm

(3-1/2)

SEE FITTING SPECS

FOR DIMENSION

197mm
(7-3/4)

C/L OF DRAIN

229mm x 305mm
(9 x 12) CUTOUT

1524mm

(60)

FINISHED
WALL

FINISHED

WALL

C/L OF
SHOWER ARM

19mm
(3/4)

C/L OF

305mm

(12)

356mm

(14)

1-1/2 O.D. TUBING

VALVES

102mm
(4)

1-1/2 N.P.T.M.

THREADS OR

C/L OF

SPOUT

SLIP JOINT

SEE
NOTE

FINISHED
WALL

25mm
(1)

346mm

(13-5/8)

44mm

(3/4)

GENERAL SPECIFICATIONS FOR 2390/2391 BATHING POOL

INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.

3

CUBE (FT

)

60 x 30 x 14 In. (1524 x 762 x 356mm)

37 Lbs./Sq.Ft. (175 Kgs./Sq.m)

110 Lbs. (50 Kg.)

460 Lbs. (209 Kg.)

42 x 19 In. (1067 x 483mm)
56 x 25 In. (1423 x 635mm)

42 Gal. (159 L)

9-1/2 In. (241mm)

18.1

1651-1981mm

(65-78)

OPTIONAL

ROUGH

FLOOR

6.2

PRINCETON™RECESS BATH
WITH INTEGRAL O VERFLOW

AMERICAST®BRAND ENGINEERED MATERIAL

PRINCETON RECESS BATH W/ INTEGRAL
OVERFLOW for Above Floor Rough Installation

Americast

®

brand engineered material

❏ 2392.202 ICH (Chrome Trim) Left Hand

Outlet for above floor installation

❏ 2392.202 ICHTC Same as above

with Tub Cover

❏ 2393.202 ICH (Chrome Trim) Right Hand

Outlet for above floor installation

❏ 2393.202 ICHTC Same as above

with Tub Cover

❏ 2392.202 ICH (Polished Brass Trim)

Left Hand Outlet

❏ 2392.202 ICHTC Same as above

with Tub Cover

❏ 2393.202 ICH (Polished Brass Trim)

Right Hand Outlet

❏ 2393.202 ICHTC Same as above

with Tub Cove

• Lift and turn drain stopper assembly
included with bath

• Escutcheon included and installed on bath

• Acid resistant porcelain finish

• Recess bath with integral apron and tiling
flange

• Integral lumbar support

• Beveled headrest

• Full slip-resistant coverage

• End drain outlet

Nominal Dimensions: 1524 x 762 x 445mm
(60" x 30" x 17-1/2")

Bathing Well Dimensions: 1423 x 635 x 337mm
(56" x 25" x 13-1/4")

Americast

®

brand engineered material is a
composition of porcelain bonded to enameling
grade metal, bonded to a patented structural
composite.

Compliance Certifications ­Meets or Exceeds the Following Specifications:

• ASME A112.19.4 for Americast Plumbing Fixtures

• ASTM F-462 for Slip-resistant Bathing Facilities

• ANSI Z124.1 Ignition Test

• ASTM E162 for Flammability

• NFPA 258 for Smoke Density

To Be Specified

❏ Color:
❏ Bath Faucet*:
❏ Faucet Finish:

© 2000 American Standard Inc.

SPS 2392 ICH /2393 ICH /2392 IPB /2393 IPB

* See faucet section for models available

Photograph details integral overflow and drain
assembly. Drain assembly included with bath.

NOTE: Roughing-in dimensions shown on reverse side of
page.

BV-036

Revised 6/00

PRINCETON™RECESS BATH
WITH INTEGRAL O VERFLOW

AMERICAST®BRAND ENGINEERED MATERIAL

© 2000 American Standard Inc.

Dimensions of fixtures are nominal and may vary within the range of toler­ances established by ANSI Standard A112.19.4
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided leaflet.

IMPORTANT:

NOTES:

LEFT HAND OUTLET SHOWN, RIGHT HAND REVERSE DIMENSIONS. (2393.202.ICH).
DRAIN AND OVERFLOW ESCUTCHEON INCLUDED WITH BATH. REFER TO INSTALLA-

TION INSTRUCTIONS SUPPLIED WITH BATH FOR DRAIN INSTALLATION.
BATH FAUCET NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH FITTING.
CONCEALED PIPING NOT FURNISHED.

PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH BATH.

▼

48mm

(1-7/8)

362mm

(14-1/4)

762mm

(30)

C/L OF

SUPPLIES

89mm

(3-1/2)

SEE FITTING SPECS

FOR DIMENSION

197mm
(7-3/4)

C/L OF DRAIN

1524mm

(60)

FINISHED
WALL

FINISHED

WALL

C/L OF
SHOWER ARM

19mm
(3/4)

C/L OF

305mm

(12)

445mm

(17-1/2)

1-1/2 O.D. TUBING

VALVES

102mm
(4)

1-1/2 N.P.T.M.

THREADS OR

C/L OF

SPOUT

SLIP JOINT

SEE
NOTE

FINISHED
WALL

25mm
(1)

435mm

(17-1/8)

1651-1981mm

GENERAL SPECIFICATIONS FOR 2392/2393ICH BATHING POOL

INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.

3

CUBE (FT

)

60 x 30 x 17-1/2 In. (1524 x 762 x 445mm)

38 Lbs./Sq.Ft. (182 Kgs./Sq.m)

121 Lbs. (55 Kg.)

471 Lbs. (214 Kg.)

42 x 19 In. (1067 x 483mm)
56 x 25 In. (1423 x 635mm)

42 Gal. (159 L)

9-1/2 In. (241mm)

21.2

(65-78)

OPTIONAL

ROUGH

FLOOR

7.4