Page 1
MODEL NUMBER:
TRIM KITS:
T375.128 Colony BATH/SHOWER Trim Kit
Lever Handle. FloWise Showerhead. LESS Valve Body.
T375.248 Colony BATH/SHOWER Trim Kit
Metal Lever Handle. FloWise Showerhead. LESS Valve Body.
T372.128 Colony SHOWER ONLY Trim Kit
Lever Handle. FloWise Showerhead. LESS Valve Body.
T372.248 Colony SHOWER ONLY Trim Kit
Metal Lever Handle. FloWise Showerhead. L
ESS
Valve Body.
ROUGH VALVES:
R110 Pressure Balance Rough Valve Body only
Direct sweat inlets/outlets. LESS trim.
R110SS Pressure Balance Rough Valve Body only
with Screwdriver stops
Direct sweat inlets/outlets. Screwdriver stops. LESS trim.
R115 Pressure Balance Rough Valve Body only
Female thread inlets/outlets. LESS trim.
R115SS Pressure Balance Rough Valve Body only
with Screwdriver stops
Female thread inlets/outlets. Screwdriver stops. LESS trim.
R117 Pressure Balance Rough Valve Body only
PEX inlets/Direct sweat outlets. LESS trim.
R117SS Pressure Balance Rough Valve Body only
with Screwdriver stops
PEX inlets/Direct sweat outlets. Screwdriver stops. LESS trim.
GENERAL DESCRIPTION:
TRIM KIT
FloWise water saving showerhead offers 40% water
savings at maximum 1.5gpm/5.7L/min. flow rate. Slip-on
diverter spout. Available with lever or metal lever handle.
Available in Bath/Shower and Shower Only combinations.
ROUGH VALVE BODY
Cast brass body, washerless ceramic disc valve cartridge
with back to back capability, and hot limit safety stop.
Cycles from “off” to “cold” to “hot”. Pressure balancing
cartridge maintains constant output temperature in
response to changes in relative hot and cold supply
pressure. 1/2" inlets and outlets (choice of direct sweat,
threaded, or PEX). Available with screwdriver stops.
Rough-in plaster guard designed for use as thin-wall
mounting adaptor.
T375.128 Bath/Shower Trim Shown
PRODUCT FEATURES:
Flowise Water Saving Showerhead: Saves up to 40% in
water usage. Max. 1.5gpm/5.7L/min. flow rate.
Cast Brass Valve Body: Durable - Quality that will last a
lifetime. Ideal material for prolonged contact with water.
Ceramic Disc Valve Cartridge: Assures a lifetime of
drip-free performance. Allows easy fine tuning of temperature
(125˚handle rotation from off to hot).
Pressure Balancing Valve Cartridge: Maintains constant
output temperature in response to changes in hot and cold
supply pressure. Diaphragm system engineered to eliminate
cross flow. Avoids failure due to mineral deposits - ideal for use
in hard water.
Back-to-Back Capability: Hot and cold can be reversed
quickly and easily.
Adjustable Hot Limit Safety Stop: Limits the amount of
hot water allowed to mix with cold. Reduces the risk of
accidental scalding.
Exclusive Plaster Guard: Plaster guard is designed to
protect valve during installation and serve as a mounting
plate for thin-wall installations. 2 piece design allows valve to
be tested prior to trim installation.
Wide Rough-in Range: From 1-5/8" to 3-1/4".
SUGGESTED SPECIFICATION:
Bath/shower fitting shall feature water saving showerhead with Max. 1.5gpm/5.7L/min. flow rate. Shall feature a cast brass body. Shall
feature ceramic disc valve cartridge which is capable of back-to-back installation. Fitting shall be equipped with pressure
balancing cartridge engineered to eliminate cross flow and avoid failure due to mineral deposits. Shall also feature hot limit safety
stop. Fitting shall be: Rough Valve Body - American Standard Model # R11____, Trim Kit - American Standard Model #
T37_.____.____.
COLONY
PRESSURE BALANCE BATH/SHOWER FITTING
WITH FloWise® SHOWERHEAD
© 2008 AS A meric a Inc.
B27
Page 2
COLONY
• Showerhead with 1.5gpm/5.7L.min. flow restrictor.
T375.128 Bath/Shower Trim Kit. Lever Handle. FloWise Showerhead. LESS Valve Body.
T372.248 Shower Only Trim Kit. Metal Lever Handle. FloWise Showerhead. LESS Valve Body.
Finish Options
Product
Number
Description
T375.248 Bath/Shower Trim Kit. Metal Lever Handle. FloWise Showerhead. LESS Valve Body.
T372.128 Shower Only Trim Kit. Lever Handle. FloWise Showerhead. LESS Valve Body.
Polished
Chrome
002
R110
R110SS
Rough Valve Body less trim. Direct Sweat inlets/outlets.
Rough Valve Body less trim. Direct Sweat inlets/outlets with Screwdriver Stops.
R115
R115SS
Rough Valve Body less trim. Female Thread inlets/outlets.
Rough Valve Body less trim. Female Thread inlets/outlets with Screwdriver Stops.
R117
R117SS
Rough Valve Body less trim. PEX inlets/ Direct Sweat outlets.
Rough Valve Body less trim. PEX inlets/ Direct Sweat outlets with Screwdriver Stops.
TRIM KITS *
Product
Number
Description
ROUGH VALVE BODIES
* TRIM & ROUGH MUST BE ORDERED SEPARATELY.
Meets the American Disabilities
Act Guidelines and ANSI
A117.1 Requirements for the
physically challenged.
SHR.
1/2" NOM.
COPPER
SWEAT
TUB 1/2" NOM.
COPPER SWEAT
SHR.
1/2" NOM.
COPPER
SWEAT
TUB 1/2" NOM.
COPPER SWEAT
THREADED (STOPS) (R115SS)
PEX (STOPS) (R117SS)
103 mm
(4-1/16")
52 mm
(2-1/32")
104 mm
(4-1/16")
INLETS 1/2" NPT
1/2" PEX INLETS
(ASTM F1807)
149 mm
(5-7/8")
165mm
(6-1/2")
THREADED (R115)
INLETS
86 mm
(3-3/8")
INLETS
1/2" NPT
86 mm
(3-3/8")
SHR
1/2" NPT
TUB PORT
1/2" NPT
INLETS
103 mm
(4-1/16")
103 mm
(4-1/16")
INLETS 1/2" NOM.
COPPER SWEAT
SHR. 1/2" NOM.
COPPER SWEAT
TUB 1/2" NOM.
COPPER SWEAT
51.5 mm
(2-1/32")
51 mm
(2")
SHR. 1/2" NOM.
COPPER SWEAT
TUB 1/2" NOM.
COPPER SWEAT
SWEAT (STOPS) (R110SS)
SWEAT (R110)
VALVE BODY OPTIONS
103 mm
(4-1/16")
INLETS
1/2" NPT
149 mm
(5-7/8")
SHR.
1/2" NOM.
COPPER
SWEAT
TUB 1/2" NOM.
COPPER SWEAT
PEX (R117)
52 mm
(2-1/32")
104 mm
(4-1/16")
1/2" PEX INLETS
(ASTM F1807)
109mm
(4-1/4")
FINISHED
WALL
TOP OF
TUB RIM
BOTTOM
OF TUB
1880mm
(74")
FOR HEAD
CLEARANCE
102mm
(4") REF.
41mm TO 83mm
(1-5/8" TO 3-1/4")
457mm
(18")
OPTIONAL
127mm
(5") REF.
38mm
(1-1/2)
152mm
(6")
102mm
(4")
REF.
178mm
(7") REF.
171mm
(6-3/4")
CODES AND STANDARDS
These products meet or exceed the
following codes and standards:
ASSE 1016
ASME A112.18.1
CSA B 125
FLOW RATE*
GALLONS PER MINUTE
I N LE T P R ES S U RE ( PS I )
*Flow rates shown are for mixed hot and cold.
0
2
4
6
8
Spout
10080604020
PRESSURE BALANCE BATH/SHOWER FITTING
WITH FloWise® SHOWERHEAD
© 2008 AS A meric a Inc.
B28
Page 3
Available Trim Kits
Colony
One
Tropic
H
F
OF
Town Square
Dazzle
Hampton
f
f
O
t
Ho
Ho
t
C
o
ld
O
ff
Enfield
Standard
Amarilis
R110 Valve Body Shown
GENERAL DESCRIPTION:
Cast brass body, washerless ceramic disc valve cartridge
with back-to-back capability and hot limit safety stop. Cycles
from "off" to "cold" to "hot". Pressure balancing cartridge
maintains constant output temperature in response to
changes in relative hot and cold supply pressure. One-half
inch inlets and outlets (choice of direct sweat, threaded, or
PEX). Available with screwdriver stops. Rough-in plaster
guard designed for use as thin-wall mounting adaptor. Valve
body will accept a variety of decorative Bath/Shower trims.
PRODUCT FEATURES:
Cast Brass Valve Body: Durable - Quality that will last a
lifetime. Ideal material for prolonged contact with water.
Ceramic Disc Valve Cartridge: Assures a lifetime of
drip-free performance. Allows easy fine tuning of temperature
(125˚handle rotation from off to hot).
Pressure Balancing Valve Cartridge: Maintains constant
output temperature in response to changes in hot and cold
supply pressure. Diaphragm system engineered to eliminate
cross flow. Avoids failure due to mineral deposits - ideal for use
in hard water
Back-to-Back Capability: Hot and cold can be reversed
quickly and easily.
Adjustable Hot Limit Safety Stop: Limits the amount of
hot water allowed to mix with cold. Reduces the risk of
accidental scalding.
Exclusive Plaster Guard: Plaster guard is designed to
protect valve during installation and serve as a mounting plate
for thin-wall installations. 2 piece design allows valve to be
tested prior to trim installation.
Wide Rough-in Range: From 1-5/8" to 3-1/4".
UPGRADABLE
PRESSURE BALANCE BATH/SHOWER FITTING
TEMPERATURE CONTROL VALVE
MODEL NUMBER:
R110 Pressure Balance Rough Valve Body only
Direct sweat inlets/outlets. LESS trim.
R110SS Pressure Balance Rough Valve Body only
with Screwdriver stops
Direct sweat inlets/outlets. Screwdriver stops. LESS trim.
R115 Pressure Balance Rough Valve Body only
Female thread inlets/outlets. LESS trim.
R115SS Pressure Balance Rough Valve Body only
with Screwdriver stops
Female thread inlets/outlets. Screwdriver stops. LESS trim.
R117 Pressure Balance Rough Valve Body only
PEX inlets/Direct sweat outlets. LESS trim.
R117SS Pressure Balance Rough Valve Body only
with Screwdriver stops
PEX inlets/Direct sweat outlets. Screwdriver stops. LESS trim.
See reverse for available trim kits.
1880mm
(74")
FOR HEAD
CLEARANCE
457mm
OPTIONAL
SHR.
1/2" NOM.
COPPER
SWEAT
TUB 1/2" NOM.
COPPER SWEAT
41mm TO 83mm
(1-5/8" TO 3-1/4")
FINISHED
WALL
(18")
25mm
(1")
102mm
(4") REF.
TOP OF
TUB RIM
BOTTOM
OF TUB
109mm
(4-1/4")
PEX (R117)
(2-1/32")
1/2" PEX INLETS
(ASTM F1807)
COPPER
52 mm
104 mm
(4-1/16")
VALVE BODY OPTIONS
1/2"
1/2"
NPT
SHR. 1/2" NOM.
COPPER SWEAT
INLETS 1/2" NOM.
COPPER SWEAT
TUB 1/2" NOM.
COPPER SWEAT
SWEAT (R110)
SHR. 1/2" NOM.
COPPER SWEAT
INLETS
1/2" NPT
TUB 1/2" NOM.
COPPER SWEAT
SWEAT (STOPS) (R110SS)
INLETS
86 mm
(3-3/8")
86 mm
(3-3/8")
THREADED (R115)
SHR.
1/2" NOM.
COPPER
SWEAT
TUB 1/2" NOM.
COPPER SWEAT
THREADED (STOPS) (R115SS)
165mm
(6-1/2")
SHR.
1/2" NOM.
COPPER
SWEAT
TUB 1/2" NOM.
COPPER SWEAT
PEX (STOPS) (R117SS)
INLETS
103 mm
(4-1/16")
149 mm
(5-7/8")
149 mm
(5-7/8")
INLETS 1/2" NPT
1/2" PEX INLETS
(ASTM F1807)
51.5 mm
(2-1/32")
51 mm
(2")
SHR
1/2" NPT
INLETS
1/2" NPT
TUB PORT
1/2" NPT
103 mm
(4-1/16")
103 mm
(4-1/16")
103 mm
(4-1/16")
52 mm
(2-1/32")
104 mm
(4-1/16")
SUGGESTED SPECIFICATION:
Bath/shower fitting shall feature a cast brass body. Shall feature ceramic disc valve cartridge which is capable of back-to-back
installation. Fitting shall be equipped with pressure balancing cartridge engineered to eliminate cross flow and avoid failure due to
mineral deposits. Shall also feature hot limit safety stop. Fitting shall be: Rough Valve Body - American Standard Model #
R11____, Trim Kit - American Standard Model # ____.____.
© 2008 AS America Inc.
B1
Page 4
UPGRADABLE
R110
Direct
Sweat
Inlets/
Outlets
R115
Female
Thread
Inlets/
Outlets
R117
PEX
Inlets/Direct
Sweat
Outlets
R115SS
Female Thread
Inlets/Outlets
w/ Screwdriver
Stops
R110SS
Direct Sweat
Inlets/Outlets
w/ Screwdriver
Stops
R117SS
PEX
Inlets/Direct
Sweat Outlets
w/ Screwdriver
Stops
VALVES
Valve + Trim:
Trim Kit & Valve Body Packaged Separately
To order:
Specify valve body
and
trim kit desired
Example:
R110 - Direct Sweat Valve Body
T215.710 - Hampton Bath/Shower Trim Kit (Porcelain Lever Handle)
**** AMARILIS
trim kits are less handles--must be ordered separately.
the following handle kits are available:
** HAMPTON
available with choice of three handles.
to order: specify the three digit handle number
ex) T211.710
(valve only trim kit w/ porcelain lever handle)
* COLONY with 2.5 showerhead
with FloWise
®
showerhead
NOTES:
*** ENFIELD available with lever or cross handle
T345.000
T342.000
T341.000
B/S
Shower
Valve
TRIM KITS
*
**
T375.XXX
T372.XXX
T371.XXX
T038.502
T038.501
T038.500
T215.7XX
T212.7XX
T211.7XX
T028.502
T028.501
T028.500
T6181
T6180
T6179
T064.502
T064.501
T064.500
T373.5X2
T373.5X1
T373.5X0
T555.502
T555.501
T555.500
***
PRESSURE BALANCE BATH/SHOWER FITTING
TEMPERATURE CONTROL VALVE
Valve + Trim:
To order:
Example:
Trim Kit & Valve Body Packaged Separately
Specify valve body
R110 - Direct Sweat Valve Body
and
trim kit desired
T215.710 - Hampton Bath/Shower Trim Kit (Porcelain Lever Handle)
VALVES
R110
Direct
Sweat
Inlets/
Direct Sweat
Inlets/Outlets
w/ Screwdriver
Outlets
Colony
R110SS
Stops
R115
Female
Thread
Inlets/
Outlets
Tropic
H
F
F
O
R115SS
Female Thread
Inlets/Outlets
w/ Screwdriver
Stops
Dazzle
f
f
O
t
o
H
Inlets/Direct
Hampton
R117
PEX
Sweat
Outlets
**
Standard
Sweat Outlets
w/ Screwdriver
R117SS
PEX
Inlets/Direct
Stops
8
6
4
2
GALLONS PER MINUTE
0
*Flow rates shown are for mixed hot and cold.
FLOW RATE*
INLET PRESSURE (PSI)
10080604020
Spout
CODES AND STANDARDS
These products meet or exceed the
following codes and standards:
ASSE 1016
ASME A112.18.1
CSA B 125
• Showerhead with 2.5gpm/9.5L.min. flow restrictor.
***
OneTown Square
Enfield
Amarilis****
B/S
T375.XXX
TRIM KITS
Shower
T372.XXX
Valve
T371.XXX
NOTES:
* COLONY with 2.5 showerhead
Lever
Handle
120
** HAMPTON
available with choice of three handles.
to order: specify the three digit handle number
ex) T211.710
Porcelain
Lever
710
*** ENFIELD available with lever or cross handle
Lever
Handle
500
**** AMARILIS
trim kits are less handles--must be ordered separately.
the following handle kits are available:
Metal
Cross
551
T038.502
T038.501
T038.500
Metal
Lever Handle
240
(valve only trim kit w/ porcelain lever handle)
Metal
Cross
Cross
Handle
Metal
Lever
720
520
441
with FloWise
T028.502
T028.501
T028.500
Lever
Handle
128
Metal
Lever
730
Metal
Lever
541
T215.7XX
T212.7XX
T211.7XX
showerhead
Metal
Lever Handle
248
Perfume
Bottle
431
T6181
T6180
T6179
T555.502
T555.501
T555.500
T064.502
T064.501
T064.500
T373.5X2
T373.5X1
T373.5X0
T345.000
T342.000
T341.000
Lexington
901
© 2008 AS America Inc.
B2
Page 5
TRIM KITS
FOR TEMPERATURE CONTROL VALVES
Trim Kits for R110, R110SS, R115, R115SS, R117, R117SS rough valve bodies. Showerhead with 2.5gpm/9.5L/min. maximum flow.
TRIM KITS ONLY. VALVE MUST BE ORDERED SEPARATELY.
Trim Kit
COLONY
COLONY
FLOWISE
TROPIC
H
F
C
F
O
Model #
Description
T375.120 BATH/SHOWER Trim Kit
• Wall escutcheon
• Lever handle
• "Easy Clean" Showerhead
• Shower arm and flange
• Slip-on Diverter tub spout
T375.240 SAME AS ABOVE
• With Metal lever handle
T372.120 SHOWER ONLY Trim Kit
• Wall escutcheon
• Lever handle
• "Easy Clean" Showerhead
• Shower arm and flange
T372.240 SAME AS ABOVE
• With Metal lever handle
T371.120 VALVE ONLY Trim Kit
• Wall escutcheon
• Lever handle
T371.240 SAME AS ABOVE
• With Metal lever handle
T375.128 BATH/SHOWER Trim Kit
WITH
• Wall escutcheon
• Lever handle
Water Saving FloWise® Showerhead
•
• Angle adjustable
• Showerhead, arm and flange
• Diverter tub spout
• Less valve
T375.248 SAME AS ABOVE
• Metal Lever handle
T372.128 BATH/SHOWER Trim Kit
• Wall escutcheon
• Lever handle
Water Saving FloWise® Showerhead
•
• Angle adjustable
• Showerhead, arm and flange
• Less valve
T372.248 SAME AS ABOVE
• Metal Lever handle
T038.502 BATH/SHOWER Trim Kit
• Metal Lever handle
• Brass wall escutcheon
• Showerhead, arm and flange
• Slip-on Diverter tub spout
T038.501 SHOWER ONLY Trim Kit
• Metal Lever handle
• Brass wall escutcheon
• Showerhead, arm and flange
T038.500 SHOWER ONLY Trim Kit
• Metal Lever handle
• Brass wall escutcheon
Finishes
.002 Polished Chrome
.002 Polished Chrome
.002
Polished Chrome
.295
Satin Nickel (PVD)
.002
Polished Chrome
.295
Satin Nickel (PVD)
.002
Polished Chrome
.295
Satin Nickel (PVD)
Roughing-In Dimensions
41mm TO 83mm
TOP OF
TUB RIM
TOP OF
TUB RIM
1/2" COPPER
(1-5/8" TO 3-1/4")
152mm
(6")
41mm TO 83mm
(1-5/8" TO 3-1/4")
152mm
(6")
19mm to 60mm
(3/4 to 2-3/8)
1/2" NPT
194mm
(7-5/8)
38mm
(1-1/2)
102mm
171mm
(6-3/4")
171mm
(6-3/4")
194mm
(7-5/8)
(4)
102mm
(4") REF.
1880mm
(74")
FOR HEAD
CLEARANCE
457mm
OPTIONAL
102mm
(4") REF.
1880mm
(74")
FOR HEAD
CLEARANCE
457mm
OPTIONAL
108mm
(4-1/4) REF.
74" FOR HEAD
CLEARANCE
FINISHED
(18")
38mm
(1-1/2)
FINISHED
(18")
38mm
(1-1/2)
FINISHED WALL
457mm
(18")
OPTIONAL
TOP OF TUB RIM
WALL
178mm
(7") REF.
127mm
(5") REF.
BOTTOM
OF TUB
WALL
178mm
(7") REF.
127mm
(5") REF.
BOTTOM
OF TUB
152mm
(6) REF.
143mm
(5-5/8)
BOTTOM OF TUB
© 2008 AS America Inc.
B3
Page 6
TRIM KITS
FOR TEMPERATURE CONTROL VALVES
Trim Kits for R110, R110SS, R115, R115SS, R010, R015, R117, R117SS rough valve bodies. Showerhead with 2.5gpm/9.5L/min.
maximum flow. TRIM KITS ONLY. VALVE MUST BE ORDERED SEPARATELY.
Model #
Trim Kit Finishes
HAMPTON
d
l
o
C
t
o
H
ff
O
T215.7XX BATH/SHOWER Trim Kit
T212.7XX SHOWER ONLY Trim Kit
• Brass wall escutcheon
• Adjustable brass Showerhead
• Shower arm and flange
T211.7XX VALVE ONLY Trim Kit
Description
• Brass wall escutcheon
• Adjustable brass Showerhead
• Shower arm and flange
• Slip-on diverter tub spout
• Brass wall escutcheon
Porcelain Lever,
Metal Cross Handle Finishes
Polished Chrome
.002
Polished Brass (PVD)
.099
Satin Nickel (PVD)
.295
Metal Lever Handle Finishes
.002
Polished Chrome
.068
Blackened Bronze (PVD)
.099
Polished Brass (PVD)
.221
Satin (PVD)/Pol. Chrome mix.
.295
Satin Nickel (PVD)
.297
Satin/Brass (PVD) mix.
.299
Pol. Chrome/Brass (PVD) mix.
Roughing-In Dimensions
178 mm REF.
127 mm REF.
(5") REF.
1880mm
(74)
FOR HEAD
CLEARANCE
OPTIONAL
102mm
457
(18)
(4)
BOTTOM
OF TUB
(7") REF.
FINISHED
WALL
38mm
(1-1/2)
130mm
(5-1/8)
REF.
FINISHED WALL
TOP OF
TUB RIM
57mm - 83mm
(2-1/4 - 3-1/4)
194mm
(7-5/8)
1/2" NPT
194mm
(7-5/8)
ff
O
Hot
STANDARD
DAZZLE
T028.502 BATH/SHOWER Trim Kit
• Metal Lever Handle
• Brass wall escutcheon
• Showerhead, arm and flange
• Slip-on diverter tub spout
T028.501 SHOWER ONLY Trim Kit
• Metal Lever Handle
• Brass wall escutcheon
• Showerhead, arm and flange
T028.500 VALVE ONLY Trim Kit
• Metal Lever Handle
• Brass wall escutcheon
T6181 BATH/SHOWER Trim Kit
• Metal wall escutcheon
• Porcelain lever handle
• 5" adjustable showerhead
• Cast brass diverter tub spout
with I.P.S. connection
T6180 SHOWER ONLY Trim Kit
• Metal wall escutcheon
• Porcelain lever handle
• 5" adjustable showerhead
T6179 VALVE ONLY Trim Kit
• Metal wall escutcheon
• Porcelain lever handle
.002
Polished Chrome
.068
Blackened Bronze (PVD)
.295
Satin Nickel (PVD)
Polished Chrome
.002
Blackened Bronze (PVD)
.068
Satin Nickel (PVD)
.295
.002
Polished Chrome
.068
Blackened Bronze (PVD)
.295
Satin Nickel (PVD)
T6181
Polished Chrome
T6181S
T6180
T6180S
T6179
T6179S
Nickel (PVD)
Satin
Polished Chrome
Nickel (PVD)
Satin
Polished Chrome
Satin
Nickel (PVD)
127mm
(5) REF.
74" FOR HEAD
CLEARANCE
TOP OF TUB RIM
130mm
(5-1/8)REF.
1880mm
(74)
FOR HEAD
CLEARANCE
OPTIONAL
18" OPTIONAL
FINISHED
457
(18)
102mm
(4)
38mm
(1-1/2)
WALL
(7-1/2) REF.
25mm
BOTTOM
OF TUB
191mm
197mm
(7-3/4)REF.
135mm
(5-5/16) REF.
BOTTOM OF TUB
(1)
143mm
(5-5/8)
REF.
TOP OF
TUB RIM
41mm - 83mm
(1-5/8 - 3-1/4)
203mm
1/2" NPT
57mm - 83mm
(2-1/4 - 3-1/4)
194mm
(7-5/8)
(8)
102mm
Off
Hot
American Standard
(4)
194mm
(7-5/8)
HAMPTON HANDLE OPTIONS
710
Porcelain*
Lever
© 2008 AS America Inc.
720
Metal Cross
730
Metal Lever
Hampton available with choice of 3 handles.
To order: specify the 3 digit handle number.
eg: T211.710 = Hampton Valve Only Trim Kit with Porcelain Lever Handle
B4
Page 7
Trim Kits for R110, R110SS, R115, R115SS, R010, R015, R117, R117SS rough valve bodies. Showerhead with 2.5gpm/9.5L/min.
maximum flow. TRIM KITS ONLY. VALVE MUST BE ORDERED SEPARATELY.
Model # DescriptionTrim Kit Finishes Roughing-In Dimensions
TOWN SQUARE
T555.502 BATH/SHOWER Trim Kit
• Metal wall escutcheon
• Metal lever handle
• Cast brass shower arm
•4 1/2" Rain showerhead
• Cast brass diverter tub spout
with I.P.S. connection
T555.501 SHOWER ONLY Trim Kit
• Metal wall escutcheon
• Metal lever handle
• Cast brass shower arm
•4 1/2" Rain showerhead
T555.500 VALVE ONLY Trim Kit
• Metal wall escutcheon
• Metal lever handle
.002
Polished Chrome
.068
Blackened Bronze (PVD)
.295
.002
.068
.295
.002
.068
.295
Nickel (PVD)
Satin
Polished Chrome
Blackened Bronze (PVD)
Nickel (PVD)
Satin
Polished Chrome
Blackened Bronze (PVD)
Nickel (PVD)
Satin
51mm
(2) REF.
1880mm
(74)
FOR HEAD
CLEARANCE
457
(18)
OPTIONAL
102mm
(4)
FINISHED WALL
203mm
(8) REF.
184mm
(7-1/4 REF.)
25mm
(1)
TOP OF
TUB RIM
BOTTOM OF TUB
1
41mm to 83mm
(1-5/8 TO 3-1/4)
1/2" I.P.S.
194mm
(7-5/8)
1/2" NPT
194mm
(7-5/8)
T064.502 BATH/SHOWER Trim Kit
ONE
• Brass wall escutcheon
•Adjustable “3 function”
showerhead
• Cast brass diverter tub spout
• LESS Valve
T064.501 SHOWER ONLY Trim Kit
• Brass wall escutcheon
•Adjustable “3 function”
showerhead
• LESS Valve
T064.500 VALVE ONLY Trim Kit
• Brass wall escutcheon
• LESS Valve
Polished Chrome
.002
Satin Nickel (PVD)
.295
Polished Chrome
.002
Satin Nickel (PVD)
.295
Polished Chrome
.002
Satin Nickel (PVD)
.295
(5-5/8) REF.
1880mm
(74)
FOR HEAD
CLEARANCE
OPTIONAL
TOP OF
TUB RIM
143mm
457
(18)
FINISHED
WALL
206mm
(8-1/8) REF.
143mm
(5-5/8)
REF.
BOTTOM OF TUB
1/2" NPT
1/2" NPT
41mm to 83mm
(1-5/8 TO 3-1/4)
184mm
(7-1/4" DIA.)
13mm
(1/2 MAX.)
102mm
(4)
© 2008 AS America Inc.
B5
Loading...