American Standard T331.000, T332.000, T335.000 User Manual
Installation
Instructions
Contemporary
BATH/SHOWER TRIM KIT
with EverClean™ Finish
T335.000
T332.000
T331.000
Congratulations on purchasing your American Standard
faucet with EverClean finish found only on American Standard faucets.
EverClean Finish
• One wipe effortlessly removes spots
• Eliminates the need for cleaners and scrubbing
• Permanent surface protectant remains beautiful
for the life of the faucet
• EverClean™ available on: Polished Chrome, Satin Nickel,
Stainless Steel, Polished Brass (or any combination of these finishes)
To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin.
ROUGHING-IN DIMENSIONS
To assure proper positioning in relation
to wall, note roughing-in dimensions.
1-5/8"" TO 3-1/4"
FINISHED WALL
7"
1/2" NPT
OPTIONAL TO FINISHED
FLOOR USUALLY 65” TO 78”
Certified to comply with ANSI A112.18.1
U.S. Patent No. D403,750
M968384 Re v. 1 .1
1-1/2" REF.
5-1/2" REF.
74" FOR HEAD CLEARANCE
6"
1/2" REF.
4"
1/2" NPT
5" REF.
BOTTOM OF TUB
INSTALL TRIM
1
Remove PLASTER GUARD (1).
Push CAP (2) on valve, place ESCUTCHEON HOLDER
(3) and attach with LONG SCREWS (4).
Place ESCUTCHEON (5) and attach with SHORT
SCREWS (6).
Choose one of the DECORATIVE RINGS (7)
and push it onto CAP (2).
TOP OF TUB RIM
Install HANDLE. See separate
"Instruction Sheet"for assembly
of handle.
Install SHOWER ARM (8), SHOWER
HEAD (9) and DIVERTER SPOUT (10).
Check proper operation of HANDLE
and DIVERTER SPOUT (10).
48"
8
9
1
3
4
5
6
7
2
10
ADJUST HOT LIMIT STOP
2
By restricting HANDLE rotation and limiting the amount of hot water allowed to mix with the cold,
the HOT LIMIT SAFETY STOP (1) reduces risk of accidental scalding. To set the maximum hot
water temperature of your faucet, all you need to do is adjust the setting on the HOT LIMIT
SAFETY STOP (1).
Turn CARTRIDGE STEM (2) to the OFF position (coldest setting) before making adjustment to
HOT LIMIT STOP (1). Use a flat blade screwdriver to pry free the HOT LIMIT SAFETY STOP (1).
Pull forward and rotate counterclockwise one number to limit hot water temperature. Use
ARROW (3) on CARTRIDGE (4) and NUMBERS (5) on HOT LIMIT STOP (1) for indication.
1
9
7
5
3
1
COLDER
MÁS FRÍA
3
HOTTER
(Smaller Numbers)
MÁS CALIENTE
2
1
5
1
3
1
(números menores)
PLUS CHAUD
(Nombres plus petits)
0 1 3 5 7 9 11 13 15
5
1
5
1
3
1
1
9
7
5
3
1
1
3
7
9
5
1
3
1
1
0
3
1
5
1
2
EverClean™ Finish Care Instructions
3
5
1
4
4
(Larger Numbers)
(números mayores)
PLUS FROID
(Nombres plus grands)
0 1 3 5 7 9 11 13 15
American Standard’s EverClean finish will wipe clean with a soft, dry cloth. A soft cloth with
clean water may also be used, if desired. No additional cleaning products are required.
DO NOT USE: Soaps, acid, polish, abrasives, harsh cleaners, or a cloth with a coarse surface.
M968384 Re v. 1 .1
Loading...