Page 1
SINGLE CONTROL VESSEL FAUCET
MODEL NUMBER:
7430.152 Berwick Single Control Vessel
Grid Drain
7430.151 Berwick Single Control Vessel
Less Drain
176mm
(6-7/8")
BERWICK
®
51mm
(2")
35mm
(1-3/8")DIA.
MOUNTING
HOLES
GENERAL DESCRIPTION:
Brass body. Metal lever handle. Washerless 35mm
ceramic disc valve cartridge with integral hot limit safety
stop. Braided flexible supply hoses with 3/8" compression
connectors. 1.5 gpm/5.7L/min. maximum flow rate.
54mm D.
(2-1/8")
28mm O.D.
(1-1/16") O.D.
234mm
(9-1/4")
325mm
(12-3/4")
51mm
(2") MAX.
32mm O.D.
(1-1/4") O.D.
321mm
(12-5/8")
76mm
(3") MAX.
PRODUCT FEATURES:
Brass Construction: Durable. Easy to clean. Ideal for
prolonged contact with water.
Ceramic Disc Valve Cartridge: Assures a lifetime of
smooth handle operation and drip-free performance.
Adjustable Hot Limit Safety Stop: Limits the amount
of hot water allowed to mix with cold. Reduces the risk of
accidental scalding.
Lead Free: Faucet contains ≤ 0.25% total lead content by
weighted average.
Choice of Finishes: Available in Polished Chrome or
Satin Nickel (PVD).
425mm
(16-3/4")
SUGGESTED SPECIFICATION:
Single control lavatory faucet shall feature a brass body and metal lever handle. Fitting shall be equipped with flexible
supplies with 3/8" compression connectors. Shall also feature washerless ceramic disc valve cartridge with an integral hot
limit safety stop. Fitting shall be American Standard Model # 7430.___.___.
© 2013 AS America, Inc.
C5
Revised 4/13
Page 2
BERWICK
SINGLE CONTROL VESSEL FAUCET
®
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
NSF 61/Section 9 and Annex G
CSA B125.1
Product
Number
7430.152
Description
Berwick Single Control Monoblock faucet with grid drain.
FLOW RATE*
2.0
1.5
1.0
0.5
GALLONS PER MINUTE
0.0
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
Finish Options
Polished
Chrome
002
10080604020
PVD
Satin Nickel
295
7430.151
Berwick Single Control Monoblock faucet less drain.
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
AERATOR MODIFICATIONS***
0.5gpm (1.9Lpm) PCA* Spray
1.0gpm (3.8Lpm) PCA Aerator
*PCA — Pressure Compensating
**To modify a product, add suffix after the 4th digit (ex. 2064F05101.002)
***Modified product models are NOT WaterSense certified.
Parts
Suffix**
___F05
___F10
© 2013 AS America, Inc.
C6
Revised 4/13
Loading...