American Standard A117.1 User Manual

GREEN TEA™

GENERAL DESCRIPTION:

Cast brass valve bodies with flexible hose connections for 6" to 12" (152mm to 305mm) installations. 1/4 turn washerless ceramic disc valve cartridges. Metal spout body with brass pull-out spout (can be locked to spout base if desired). Hose is 1250mm (4') long with 625mm (2') reach. Two integral check valves. One-half inch male inlet shanks with brass coupling nuts. 20" (500mm) long flexible stainless steel drain cable is pre-assembled to faucet body. Metal Speed Connect® drain body with 1-1/4 inch (32mm) tail piece. 1.5 gpm/5.7L/min. maximum flow rate.

PRODUCT FEATURES:

Ceramic Disc Valve Cartridges: Assures a lifetime of

drip-free performance.

Cast Brass Valve Bodies: Durable. Ideal for prolonged

contact with water.

Low Lead: Meets NSF Standard 61/Section 9 & Prop 65

lead requirements.

Integral Check Valves:

Prevent backflow.

Exclusive Speed Connect Metal Drain:

• Fewer Parts - installs in less time.

• No adjustments required - seals the first time, every time.

• Flexible stainless steel cable - installs effortlessly in tight spaces.

Choice of Finishes: Available in Polished Chrome or

Stainless Steel (PVD).

MODEL NUMBER:

7010.801 Widespread Lavatory with Pull-Out Spout

Metal Speed Connect® Pop-up drain. Metal Lever handles.

SUGGESTED SPECIFICATION:

Two handle widespread lavatory faucet shall feature a pull-out spout with two check valves and cast brass valve bodies with flexible hose connections for 6" to 12" installations. Shall also feature 1/4 turn washerless ceramic disc valve cartridges. Shall

also feature a metal drain body with stainless steel cable actuation. Fitting shall be American Standard Model #7010.801.___.

152mm to 305mm

(6" to 12") FLEXIBLE

28mm (1-1/8) DIA.

35mm (1-3/8)DIA. MOUNTING HOLES (3)

89mm

(3-1/2)

32mm

(1-1/4)

MAX.

DECK

THICKNESS

FOR GROUND JOINT OR 1/2" O.D. SLIP CONNECTION

FLEXIBLE

HOSE

FLEXIBLE

HOSE

MOUNTING SURFACE

44mm (1-3/4)

52mm (2-1/16)

182mm

(7-3/16)

PULL-OUT

SPOUT FEATURE

32mm (1-1/4) MAX. DECK THICKNESS

88mm

(3-7/16)

125mm

(4-15/16)

91mm

(3-9/16)

32mm OD

(1-1/4 OD)

128mm

(5-1/16)

TWO-HANDLE WIDESPREAD LAVATORY FAUCET

WITH PULL-OUT SPOUT

C31

GREEN TEA™

CODES AND STANDARDS

These products meet or exceed the following codes and standards:

ANSI A117.1 ASME A112.18.1 CSA B 125 NSF 61/Section 9

Product Number

Description

7010.801

Lavatory faucet with Metal Speed Connect® Pop-up drain. Metal Lever handles.

Meets the American Disabilities Act Guidelines and ANSI A117.1 Requirements for the physically challenged.

Finish Options

PVD

Stainless

Steel

075

Polished

Chrome

002

FLOW RATE*

GALLONS PER MINUTE

I N L E T P RE S SU R E (P S I)

*Flow rates shown are for mixed hot and cold.

0.0

0.5

1.0

1.5

2.0

10080604020

TWO-HANDLE WIDESPREAD LAVATORY FAUCET

WITH PULL-OUT SPOUT

C32