American Standard A112.19.2M User Manual
FloWise® 1.28 ELONGATED TOILET
305mm
(12)
762mm
(30)
222mm
(8-3/4)
C/L OF OUTLET
FINISHED WALL
19mm ± 6mm
(3/4 ± 1/4)
381mm
(15)
C/L
470mm
(18-1/2)
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
254mm
(10)
FINISHED
FLOOR
794mm
(31-1/4)
267mm
(10-1/2)
114mm
(4-1/2)
438mm
(17-1/4)
203mm
(8)
356mm
(14)
83mm
(3-1/4)
SUPPLY
AS
REQ'D
16mm
(5/8)
343mm
(13-1/2)
❏ 2073.013
• Vitreous china
• Meets denition for HET™ or
High Efciency Toilet
• High efciency, low-consumption
(4.8 Lpf/1.28 gpf)
• 3" non-adjustable, apper-free ush valve
• Elongated siphon action jetted bowl
• 2-1/8" fully-glazed trapway
• Speed Connect® tank/bowl coupling system
• Chrome-plated trip lever
• Sanitary Dam on bowl
• 100% factory ush tested
• 2 bolt caps
❏ 3018.013 Elongated Bowl
❏ 4023.014 Tank
FloWise® 1.28
ELONGATED TOILET
VITREOUS CHINA
Nominal Dimensions:
762 x 438 x 794mm
(30" x 17-1/4" x 31-1/4")
Fixture only, seat and supply by others
Compliance Certications Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
• Los Angeles Department of Water and Power
Supplementary Purchase Specication for
Non-Adjustability
To Be Specied:
❏ Color:
❏ White
❏ Seat: (please specify color)
❏ Slow Close Elongated #5325.010
❏ Rise & Shine Elongated #5324.019
❏ Laurel Elongated #5311.012
❏ Supply with stop:
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIX TURE AND MUST BE ORDERED
SEPARATELY.
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
*
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to c hange or cancellation. No responsibility
is assumed for use of superseded or voided pages.
© 2008 AS America Inc.
M41
Revised 11/05
Loading...