American Standard 9586.101 User Manual
BORDEAUX™ VANITY
❏ 9532.200 Bordeaux Vanity
• Made from Alder solids with Cherry veneers
• European French Country bow front chest
vanity with matching wood top
• Optional Marble top pre-cut for Ovalyn
undercounter drilled with 8" faucet holes
• Aged Chestnut with a hand-distressed nished
and antiqued brass hardware in bronze
• Features curved interior adjustable shelves
• Right Height™ for greater comfort during use
Nominal Dimensions:
32-3/8" x 21-1/4" (822 x 540mm)
35-5/8" (905mm) height (w/Wood top)
35-3/4" (908mm) height (w/Marble top)
❏ 9586.101 Bordeaux Mirror
• Solid Alder wood frame and mirror compliments
Bordeaux Vanity
BORDEAUX™
VANITY and MIRROR
WOOD
Nominal Dimensions:
26-1/8" x 38-1/4"
(664 x 972mm)
SEE REVERSE SIDE FOR ROUGHING-IN DIMENSIONS
To Be Specied (Recommended Sinks for Wood Top):
❏ 0575.000 Coventry
❏ 0573.000 Sebring
To Be Specied (Optional):
❏ 9532.495 Marble top pre-cut for Ovalyn
undercounter drilled with 8" faucet holes
❏ 0495.221 Ovalyn undercounter sink required for
Marble top (specify color)
❏ Faucet*: Variety of American Standard faucets are
available (specify nish)
*See faucet section for available models
9532.200 Bordeaux Vanity shown with optional River
Sand Marble top, Ovalyn undercounter and Amarilis
Jasmine faucet with metal lever handle.
9586.101 Bordeaux Mirror.
© 2008 AS America Inc.
River Sand
NOTE: The above are photographs of the Bordeaux Marble
Vanity Top and are to be only used as a guide for selection.
Marble is a natural product and as such may vary in shading
and texture. Viewing Marble Tops on display at a local
American Standard Dealer is recommended.
I1
Revised 2/08
BORDEAUX™
32-3/8"
(822mm)
A
32-3/4"
(832mm)
*22-3/4"
(578mm)
*24-3/4"
(629mm)
FINISHED FLOOR
6"
(152mm)
4"
(102mm)
TYP
ANCHORING HOLES
21-1/4"
(540mm)
A = 35-5/8"(981mm)
with Wood top
A = 35-3/4"(908mm)
with Marble top Option
6" (152mm)
1-1/4" O.D.
WASTE
SUPPLIES
AS REQ'D
1-7/8"
(48mm)
26-1/8"
(664mm)
38-1/4"
(972mm)
VANITY and MIRROR
WOOD
9532.200 Bordeaux Vanity with Wood Top
NOTES:
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P”
*
TRAP ARE SUGGESTED.
- FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19. 2.
These measurements are subject to c hange or cancellation. No
responsibility is assumed for use of superseded or voided pages.
9586.101 Bordeaux Mirror.
© 2008 AS America Inc.
I2
Revised 2/08
Loading...