American Standard 9482.000 User Manual

BARRIER FREE

FIN ISHED WALL

267 mm (10 -1/2)

140 mm (5- 1/2)

51m m

(2) MIN.

COUNTER TOP CUTOUT

UNDER

COUNTER

BASIN RIM

C/L

489 mm

(19 -1/4)

37 mm(1-7 /16) DIA.

HOL E TYP.

SEALING

COMPOUND

COUNTERTOP (BY OTHERS)

140mm

(5-1/2)

203 mm (8)

92m m (3- 5/8)

1-1/4 O.D. TAILPIECE

1-1/4 O.D. WASTE

SUPPLIES AS REQ'D

45°

MOU NTING CLI P (SE E DETA IL)

337 mm

(13 -1/4)

400 mm

(15 -3/4)

16m m

(5/ 8)

-2m m(1/16 )

+3m m(1/8)

*31 1mm (12 -1/4)

*26 2mm (10 -1/2)

425 mm

(16 -3/4)

70m m

(2- 3/4)

DET AIL OF MOUNT ING C LIP

(KI T No.0 47194- 0070A )

LAVA

BRASS

INSERT

19mm

(3/4) MIN.

REFER TO INSTRUCTIONS

PROVIDED WITH KIT FOR

ADDITIONAL INFORMATION

CLIP MACH. SCREW

864mm

(34)

51mm

(2)

610mm

(24)

152mm

(6)

MAX.

BARRIER FREE

CLEARAN CE

686mm

(27)

MIN.

203mm

(8)

MIN.

229mm

(9)

MIN.

DRAWING FOR

DIMENSIONAL

PURPOSES ONLY.

IT IS NOT AN EXACT

REPRESENTATION.

OVALYN UNIVERSAL ACCESS™ SINK

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES CHECK LOCAL CODES.

Countertop 864mm (34") from finished floor. Lavatory installed 51mm (2") MIN. from front edge of countertop. Countertop thickness to be 25mm (1") maximum.

• Made from vitreous china

• Unglazed rim for under counter mount

• Rear overow

• Supplied with mounting kit (047194-0070A) and template

❏ 9482.000

Nominal Dimensions:

489 x 400mm (19-1/4" x 15-3/4")

Bowl sizes:

425mm (16-3/4") wide 337mm (13-1/4") front to back 140mm (5-1/2") deep 102mm (4") bowl depth

OVALYN UNIVERSAL ACCESS™

UNDERCOUNTER SINK

VITREOUS CHINA

Compliance Certications Meets or Exceeds the Following Specications:

• ASME A112.19.2M for Vitreous China Fixtures

• CAN/CSA B45 series

• 1995 National Building Code, section 3.7 and CAN/CSA-B651-M90 and OBC 3.7.

To Be Specied:

❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Silver ❏ Fawn Beige ❏ Black

❏ Faucet*: ❏ Faucet Finish: ❏ Supplies: ❏ 1-1/4" Trap:

* See faucet section for additional models available

For Universal Design Options, top of counter may be mounted at 813mm (32") minimum from nished oor to meet ADA and ANSI A117.1 requirements. A 838mm (33") minimum mounting height is required for Ontario. Check local codes for heights and faucet handles requirements.

NOTES:

DIMENSIONS SHOWN FOR LOCATION OF SUPPLIED AND “P" TRAP ARE

SUGGESTED.

▼ UNDERCOUNTER MOUNTING KIT SUPPLIED WITH BASIN.

FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY. USE ENCLOSED TEMPLATE FOR COUNTERTOP CUTOUT SEALING COMPOUND SUPPLIED BY OTHERS.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to c hange or cancellation. No responsibility is assumed for use of superseded or voided pages.

J55

Revised 2/08