American Standard 9420.000 User Manual
RETROSPECT COLLECTION® WASHSTAND
FINISHED WALL
*
*
1-1 /4 O.D .
WAS TE
SUP PLIES
AS REQ'D
FINISHED
FLOOR
FINISHED
WALL
9"
(229mm)
7"
(178mm)
19-3/4"
(502mm)
27"
(686mm)
8"
(203mm)
13-3/4"
(349mm)
3-3/8"
(86mm)
1-3/4" DIA.
STD. DRAIN
OUTLET
3/8" (10mm) DIA.
SINK ANCHOR
SCREW HOLES
ON 13-3/4" (349mm)
CENTERS
36"
(914mm)
24"
(610mm)
22"
(559mm)
1-1/4" O.D.
TAILPIECE
8"
13-1/2"
(343mm)
(203mm)
3 Holes
1-3/8" (35mm) Dia.
15"
(381mm)
7-1/4"
(184mm)
• Retrospect Collection® pedestal top with period
reproduction of classic dry sink wood washstand
• Washstand/pedestal top with faucet holes on
8" (203mm) center
• Turned leg detailing with lower drawer storage in
White nish
• Select hardwood solids construction
• Right Height™ for greater comfort during use
• Part of design matched Retrospect Collection
Separate Components:
❏ 0282.008 Washstand/Pedestal top
8" (203mm) centers
❏ 9420.000 Washstand only
Nominal Dimensions with Sink:
27" x 19-3/4" x 36"
(686 x 502 x 914mm)
RETROSPECT COLLECTION
®
WASHSTAND
FIRE CLAY/WOOD
®
Compliance Certications Meets or Exceeds the Following Specications:
• ASME A112.19.9M for Non Ceramic Fixtures
• CAN/CSA B45 Series
To Be Specied:
❏ Color: White only
❏ Recommended Faucet: 2373.701
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap: 752683-495
❏ P Trap Finish:
© 2008 AS America Inc.
NOTES:
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P” TRAP ARE
*
SUGGESTED.
▼ ANCHOR SCREWS FOR L AVATORY AND PEDESTAL NOT INCLUDED.
- FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.9M.
These measurements are subject to c hange or cancellation. No responsibility
is assumed for use of superseded or voided pages.
I24
Revised 2/08
Loading...