American Standard 9047.093 User Manual
SURGEON’S SCRUB SINK
356mm
(14)
FINISHED WALL
1-1/2 O.D.
TAILPIECE
FINISHED FLOOR
711mm
(28)
914 mm
(36 )
356 mm
(14 )
T-7 F HANG ER
559mm
(22)
MIXING VALVE BODY
254mm
(10)
305mm
(12)
425mm
(16-3/4)
140mm
(5-1/2)
445mm
(17-1/2)
76mm
(3)
146mm
(5-3/4)
292mm
(11-1/2)
73mm
(2-7/8)
1-1/2 N.P.T..
WASTE OUTLET
127mm
(5)
C
L
76mm
(3)
76mm
(3)
76mm
(3)
C/L OF 3/8 N.P.T.
SUPPLIES
381mm (15) BRACKETS (485742-600)
TO BE ORDERED SEPARATELY
133 mm
(5- 1/4)
C/L OF
TEMP.
SUPPLY
25mm
(1)
*
457mm
(18)
• Vitreous china
• Low front rim
• Wall hanger
• For wall hanger (included) or for
exposed bracket support [381mm (15")
painted brackets available]
❏ 9047.044 Faucet holes on 203mm (8") centers
❏ 9047.093 Single center faucet hole (Illustrated)
Nominal Dimensions:
711 x 559mm
(28" x 22")
Compliance Certications Meets or Exceeds the Following Specications:
• ASME A112.19.2 for Vitreous China Fixtures
SURGEON’S
SCRUB SINK
VITREOUS CHINA
To Be Specied:
❏ Gooseneck Spout: 7522.055
❏ Knee Action Mixing Valve: 7676.029
❏ Grid Drain: 7716.020
❏ Trap:
❏ Nipple:
❏ Painted Bracket Support: 485742-600 (2 req’d)
❏ Flex Tempered Supply (by others):
Available in White Only
NOTES:
DIMENSION SHOWN FOR LOCATION OF “P” TRAP IS SUGGESTED.
*
15" PAINTED SUPPORT BRACKETS 485742-600 AVAILABLE AND MUST
BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
IMPORTANT: Dimensions of xtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibilit y is
assumed for use of superseded or voided pages.
© 2008 AS America Inc.
M30
Revised 8/05
Loading...