American Standard 8345.118 User Manual

CLINIC SERVICE SINK WITH STAINLESS

C/L OF OUT LET

83 mm (3- 1/4)

FIN ISHED WALL

25m m (1) OFFSE T

108 mm (4- 1/4)

38m m (1-1 /2) O.D . TUBI NG FLU SH PIP E

1-1 /2 SPU D

362 mm

(14 -1/4)

13m m (1/ 2)

TER RAZO B ASE (BY OTHER S)

38m m

(1- 1/2)

121 mm

(4- 3/4)

203 mm

(8)

356 mm

(14 )

457 mm

(18 )

106 7mm

(42 )

C/L

254 mm (10 )

OR AS

REQ UIRED

C/L OF SPO UT BRA CE

1/2 N.P.T . SUP PLIES

FIN ISHED FLO OR

711 mm

(28 )

552 mm

(21 -3/4)

(2) 13mm X 25m m (1/2 X 1) SLOTS ON 152mm (6) C ENTERS

508 mm

(20 )

248 mm

(9- 3/4)

178 mm

(7)

1" C.W.T. OR N.P.T. SUPPLY

TO FLUSH VALVE

STEEL BOLT COVERS

• Vitreous china

• Flushing rim

• Siphon jet ushing action

• 1-1/2" brass top spud

• 4" oor outlet

• Stainless steel bolt covers

❏ 9504.010 Service sink

Available Components:

❏ 037640-0020A Cast metal loose strainer ❏ 7832017.075 Stainless steel 10" (254mm)

guard (3 shown)

Nominal Dimensions: 749 x 508 x 457mm (29-1/2" x 20" x 18")

CLINIC SERVICE SINK

VITREOUS CHINA

Compliance Certications Meets or Exceeds the Following Specications:

• ASME A112.19.2 for Vitreous China Fixtures

To Be Specied:

❏ Faucet: 8345.118 service sink faucet with brace, 152mm (6") elbow handles, 375mm (14-3/4") wall to spout outlet, screwdriver stops

❏ Alternative Faucet: ❏ Pedal Valve: 7679.012 self-closing, double

pedal valve, screwdriver stops, wall-mounted ❏ Flush Valve: Sloan Royal 117 HYVO with 25mm (1") offset

❏ Alternate Flush Valve ❏ Rim Guard: Stainless Steel 279mm (11")

7832.017 (3) if required

❏ Bedpan Cleaner 7880.024 assembly includes: ❏ 7837.024 Vacuum Breaker ❏ 7866.015 Nozzle with Hook

7679.012 Pedal Valve

❏ ❏ ❏ Strainer: 037640-0020A Metal Loose Strainer ❏ Optional Terrazzo Base (by others)

Available in White Only

7544.018 Loose Key Supply

NOTES:

TERRAZZO BASE AS SHOWN, FIELD FABRICATED (BY OTHERS). OUTLET FOR STANDARD DRAIN CONNECTION. TO COMPLY WITH AREA CODE GOVERNING THE HEIGHT OF VACUUM BREAKER ON FLUSH VALVE, THE PLUMBER MUST VERIFY DIMENSIONS SHOWN FOR SUPPLY ROUGHING. FLUSH VALVE AND FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibilit y is assumed for use of superseded or voided pages.

M32

Revised 8/05