American Standard 8040.300 User Manual
Installation
ACCESSORIES
24" TOWEL SHELF with TOWEL BAR
Instructions
8040.300
Thank you for selecting American-Standard...the benchmark of fine
quality for over 100 years.
To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin.
Recommended Tools
Tape Measure
10'
Drill
Hex Wrench
24" TOWEL SHELF with TOWEL BAR
1
Install 24" TOWEL SHELF (2) and TOWEL BAR (1) onto front of MOUNTING PLATES (5) (see Figure A). Secure and tighten the HEX BOLTS (7),
from back of MOUNTING PLATES (5) to secure.
The 24" TOWEL SHELF (2) with TOWEL BAR (1) works best if secured to a wall stud or cross brace within the wall, using the SCREWS (3)
supplied.
Determine desired height and location (optional) and mark a center line. For the 24" TOWEL BAR (2) mark a centerline 24" horizontally
from the first location. Using the MOUNTING PLATE (5) as a template mark the two spots for the ANCHORS (4). Repeat for the other
MOUNTING PLATE (5). If MOUNTING PLATE (5) is secured to a stud or cross brace drill small pilot holes for SCREWS (3).(see Figure B).
Regular Screwdriver
Phillips Screwdriver
CARE INSTRUCTIONS:
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR
WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: CLEAN THE PRODUCT WITH SOAPS, ACID,
POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH
WITH A COARSE SURFACE.
Certified to comply with ANSI A112.18.1
U.S. Patent No. D403,750
M968248A
For installations on drywall,
then press into drywall until it is seated flush with the wall. Place MOUNTING PLATE (5) over ANCHORS (4) and insert SCREWS (3) provided
with #2 Phillips screwdriver. See illustration below. Secure MOUNTING PLATE (5) to wall with SCREWS (3).
For installations on tiled walls,
holes a minimum of 1-1/4" deep. Insert the two ANCHORS (4) flush with face of the finished wall. Secure MOUNTING PLATE (5) to wall
with SCREWS (3).
use ANCHORS (4) and SCREWS (3) for securing MOUNTING PLATE (5) to wall. Drill two 1/4" dia. holes
If ANCHORS (4) and SCREWS (3) are used for securing MOUNTING PLATE (5) drill two 1/4" dia.
Figure C
23-3/4"
1"
CENTER LINE
5
7
BACK SIDE
7
Figure A
2
USE MOUNTING
4
5
3
PLATE AS TEMPLATE
2
Figure B
1
FRONT
6-3/8"
1"
CENTER LINE
48" TO 68"
(OPTIONAL)
4
3
2
5
1
3
1
4
FINISHED
WALL
ACCESSORIES
24" TOWEL SHELF
WITH TOWEL BAR
MODEL NUMBERS
8040.300
8040.300
24" TOWEL SHELF with TOWEL BAR
M923092-YYY0A
24" TOWEL SHELF
M918985-0070A
WOOD SCREW
M919209-YYY0A
24" TOWEL BAR
M918309-0070A
SCREW
M907546-YYY0A
MOUNTING PLATE
Replace the "YYY" with
appropriate finish code
CHROME
POLISHED BRASS
002
099
For toll-free information and answers to your questions, call:
IN CANADA 1-800-387-0369 (TORONTO 1-905-306-1093)
Product names listed herein are trademarks of American Standard Inc.
© American Standard Inc. 2002
HOT LINE FOR HELP
1-800 442-1902
Weekdays 8:00 a.m. to 8:00 p.m. EST
Weekdays 8:00 a.m. to 7:00 p.m. EST
M968248A
Loading...