American Standard 8040.061, 8040.050 User Manual
Installation
Instructions
8040.050
8040.061
SOAP DISH
TUMBLER/TOOTHBRUSH HOLDER
Thank you for selecting American-Standard...the benchmark of fine
quality for over 100 years.
To ensure that your installation proceeds smoothly--please read
these instructions carefully before you begin.
Recommended Tools
10'
Drill
Tape Measure
Regular Screwdriver
Certified to comply with ANSI A112.18.1
M968299A
#2 Phillips Screwdriver
SOAP DISH
1
The SOAP DISH (1) and TUMBLER/TOOTHBRUSH HOLDER (2) work best if secured to a wall stud or cross brace within the wall, using the
SCREWS (3) supplied.
Determine desired height and location (optional) and mark a center line. Using the MOUNTING PLATE (5) as a template mark the two
spots for the mounting holes. If MOUNTING PLATE (5) is secured to a stud or cross brace drill small pilot holes for SCREWS (3).
For installations on drywall,
or cordless screwdriver into recess of anchor. Press into drywall while turning the anchor clockwise until it is seated flush with the wall.
Place MOUNTING PLATE (5) over ANCHOR (4) and insert SCREWS (3) with #2 Phillips screwdriver. See illustration below.
Secure MOUNTING PLATE (5) to wall with SCREWS (3).
For installations on tiled walls,
SCREWS (3) for securing MOUNTING PLATE (5) to tiled wall. Place #2 Phillips screwdriver or cordless screwdriver into recess of anchor.
Press into drywall while turning the anchor clockwise until it is seated flush with the tiled wall. Place MOUNTING PLATE (5) over
ANCHORS (4) and insert SCREWS (3) with #2 Phillips screwdriver. See illustration below. Secure MOUNTING PLATE (5) to wall
with SCREWS (3).
Install the WALL ESCUTCHEON (6) onto MOUNTING PLATE (5). Place the BODIES (1,2) on the WALL ESCUTCHEON (6). Align and secure
with ATTACHMENT SCREW (7). Push in INDEX BUTTON (8) into BODIES (1, 2). Place SOAP DISH and TUMBLER into
their HOLDER to complete installation.
5
3
and
TUMBLER/TOOTHBRUSH HOLDER
use ANCHORS (4) and SCREWS (3) for securing MOUNTING PLATE (5) to wall. Place #2 Phillips screwdriver
pre drill a 1/4" hole through the tile only. Do not drill into the drywall. Use ANCHORS (4) and
USE MOUNTING PLATE AS TEMPLATE
4
CENTER LINE
4
INSTALLATION
3
6
7
1
7
8
8
OPTIONAL TO FINISHED FLOOR
CARE INSTRUCTIONS:
2
DO:
SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT:
A CLOTH WITH A COARSE SURFACE.
DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR
5
FINISHED WALL
2
SOAP DISH
TUMBLER/TOOTHBRUSH HOLDER
MODEL NUMBERS
4137.001
8040.050
8040.061
M922293-0070A
M918650-0070A
ATTACHMENT SCREW
M907041-YYY0A
INDEX BUTTON
SOAP DISH
M922291-0070A
TUMBLER
8040.050
M907720-YYY0A
WALL ESCUTCHEON
8040.061
M918019-0070A
ANCHOR
M962220-0070A
MOUNTING PLATE
M918985-0070A
WOOD SCREW
M918650-0070A
ATTACHMENT SCREW
M907041-YYY0A
INDEX BUTTON
Replace the "YYY" with
appropriate finish code
CHROME
POLISHED BRASS
SATIN
SATIN
002
099
234
246
M918019-0070A
ANCHOR
M962220-0070A
MOUNTING PLATE
M918985-0070A
WOOD SCREW
M907720-YYY0A
WALL ESCUTCHEON
For toll-free information and answers to your questions, call:
IN CANADA 1-800-387-0369 (TORONTO 1-905-306-1093)
Product names listed herein are trademarks of American Standard Inc.
© American Standard Inc. 2003
HOT LINE FOR HELP
1-800 442-1902
Weekdays 8:00 a.m. to 8:00 p.m. EST
Weekdays 8:00 a.m. to 7:00 p.m. EST
M968299A
Loading...