American Standard 7745.811, 7741.000 User Manual
FLORWELL™ SERVICE SINK
13
(330mm)
13
(330mm)
13
(330mm)
5
(127mm)
8
(203mm)
2
(51mm)
3 N.P.T. INSIDE THDS
1/4 (6mm)
48
(1219mm)
28
(711mm)
3/4
(19mm)
3/4
(19mm)
3/4
(19mm)
1 x 3
(25 x 76mm)
SUPPORTING
CLEAT ON
BOTH WALLS
12-1/4
(311mm)
28
(711mm)
FINISHED WALL
NOTE: SUPPLY FITTING CAN BE
PLACE ON EITHER WALL
C/L OF
SPOUT BRACE
1/2 NPT
SUPPLIES
FINISHED WALL
FINISHED WALL
PLAN VIEW
8
(203mm)
9
(229mm)
ROUGH
FLOOR
• Enameled cast iron
• 3" outlet
• Corner model
❏ 7741.000 Fixture only - Less rim guard
❏ 7745.811 Removable vinyl rim guard
Nominal Dimensions:
711 x 711 x 330mm
(28" x 28" x 13")
Compliance Certications Meets or Exceeds the Following Specications:
• ASME A112.19.1 for Cast Iron Plumbing Fixtures
FLORWELL™
SERVICE SINK
ENAMELED CAST IRON
To Be Specied:
❏ Faucet: 8344.112 faucet with top brace,
stops, and vacuum breaker
❏ Alternative Faucet:
❏ Drain: 7721.038 at grid drain
❏ Removable vinyl-coated rim guard:
7745.811 (black)
© 2008 AS America Inc.
NOTES:
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
IMPORTANT: Dimensions of xtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibilit y is
assumed for use of superseded or voided pages.
M34
Revised 8/05
Loading...