American Standard 7695.000, 7695.008 User Manual
AKRON™ SERVICE SINK
FINISHED WALL
HANGER
C/L OF
SPOUT
BRACE
14
(356mm)
8
(203mm)
9
(229mm)
3 REF.
(76mm)
1
(25mm)
11-1/4
(286mm)
15 REF.
(381mm)
24
(610mm)
42-1/4
(1073mm)
26-1/4
(667mm)
10-1/4
(260mm)
20-1/2
(521mm)
2
(51mm)
5
(127mm)
10-1/2
(267mm)
9
(229mm)
1/2 COLD
1/2 HOT
FINISHED
FLOOR
2 OR 3 N.P.T. NIPPLE
AND FLANGE
NOT FURNISHED
6
(152mm)
• Enameled cast iron (inside only enameled)
• Supplied with wall hanger and rim guard
• Available with plain back or drilled back
for faucet
❏ 7695.008 With drilled back 2 holes on 8"
centers and rim guard
❏ 7695.000 With plain back and rim guard
(no faucet hole drilling)
Available Components:
❏ 8379.026 Rim Guard
Nominal Dimensions:
610 x 521mm
(24" x 20-1/2")
AKRON™
SERVICE SINK
ENAMELED CAST IRON
Bowl sizes:
19-7/8" (505mm) wide
16-3/8" (416mm) front to back
10-1/2" (267mm) deep
Compliance Certications Meets or Exceeds the Following Specications:
• ASME A112.19.1 for Cast Iron Plumbing Fixtures
To Be Specied:
❏ Faucet: 8340.235 exposed yoke wall-mount
utility faucet
❏ Faucet: 8340.243 same as above
with vacuum breaker
❏ Faucet: 8341.076 same as above
with vacuum breaker and stops in shank
❏ Alternative Faucet
❏ Trap Standard: 7798.030 cast iron “P” trap
standard to wall and strainer for 3" iron pipe
❏ Trap Standard: 7798.020 cast Iron “P” trap
standard to wall and strainer for 2" iron pip
NOTES:
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
FITTING AND TRAP STANDARD NOT INCLUDED AND MUST BE
ORDERED SEPARATELY.
IMPORTANT: Dimensions of xtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibilit y is
assumed for use of superseded or voided pages.
© 2008 AS America Inc.
M35
Revised 8/05
Loading...