American Standard 7692.008, 7692.000 User Manual
LAKEWELL™ SERVICE SINK
11-1/4
(286mm)
15 REF.
(381mm)
26-1/4
(667mm)
6
(152mm)
14
(356mm)
1
(25mm)
10-1/4
(260mm)
2
(51mm)
9
(229mm)
FINISHED WALL
HANGER
C/L OF
SPOUT
BRACE
8
(203mm)
9
(229mm)
3 REF.
(76mm)
22
(559mm)
42-1/4
(1073mm)
18
(457mm)
5
(127mm)
10-1/2
(267mm)
1/2 COLD
1/2 HOT
FINISHED
FLOOR
2 or 3 N.P.T. NIPPLE
AND FLANGE
NOT FURNISHED
• Enameled cast iron (inside only enameled)
• Supplied with wall hanger and rim guard
• Available with plain back or drilled back
for faucet
❏ 7692.008 With drilled back 2 holes on 8"
centers and rim guard
❏ 7692.000 With plain back and rim guard
(no faucet hole drilling)
Available Components:
❏ 8379.018 Rim Guard
Nominal Dimensions:
559 x 457mm
(22" x 18")
LAKEWELL™
SERVICE SINK
ENAMELED CAST IRON
Bowl sizes:
18-1/2" (470mm) wide
14-1/8" (359mm) front to back
10-1/2" (267mm) deep
Compliance Certications Meets or Exceeds the Following Specications:
• ASME A112.19.1 for Cast Iron Plumbing Fixtures
To Be Specied:
❏ Faucet: 8340.235 exposed yoke wall-mount
utility faucet
❏ Faucet: 8340.243 same as above
with vacuum breaker
❏ Faucet: 8341.076 same as above
with vacuum breaker and stops in shank
❏ Alternative Faucet
❏ Trap Standard: 7798.030 cast iron “P” trap
standard to wall and strainer for 3" iron pipe
❏ Trap Standard: 7798.020 cast Iron “P” trap
standard to wall and strainer for 2" iron pip
NOTES:
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
FITTING AND TRAP STANDARD NOT INCLUDED AND MUST BE
ORDERED SEPARATELY.
IMPORTANT: Dimensions of xtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibilit y is
assumed for use of superseded or voided pages.
© 2008 AS America Inc.
M36
Revised 5/03
Loading...