American Standard 7507.000, 7507.103 User Manual
CULINAIRE™ 18" STAINLESS STEEL
ISLAND SINK
❏ 7507.103 Top Mount
• 18 Gauge Stainless Steel
• 18/10 Chrome Nickel content
• Island bowl design
• Top mount
• Single faucet hole
• One accessory hole
• Mounting clips supplied
Nominal Dimensions:
457 x 559 x 209mm
(18" x 22" x 8-1/4")
❏ 7507.000 Undercounter Mount
• 18 Gauge Stainless Steel
• 18/10 Chrome Nickel content
• Island bowl design
• Undercounter installation
• Mounting clips and cutout template supplied
CULINAIRE™ 18"
ISLAND BOWL
18 GAUGE STAINLESS STEEL
7507.103 Shown with 4233.400 Culinaire Bar
Faucet (not included)
Nominal Dimensions:
384 x 197 x 203mm
(15-1/8" x 17-3/4" x 8")
Bowl sizes:
343mm (13-1/2") wide
410mm (16-1/8") front to back
200mm (7-7/8") deep
Compliance Certications Meets or Exceeds the Following Specications:
• ASME A112.19.3 for Stainless Steel Plumbing
Fixtures
• CSA B45 for Plumbing Fixtures
To Be Specied:
❏ Color: Stainless Steel
❏ Faucet*:
❏ Faucet Finish:
❏ Basket Strainer: 4331.013
❏ Soap Dispenser: 4503.115
❏ Vinyl Coated Bottom Sink Rack-Sm: 7412.100
7507.000 Shown with 4233.400 Culinaire Bar
Faucet (not included)
SEE REVERSE SIDE FOR ROUGHING-IN DIMENSIONS
❏ Vinyl Coated Dish Rack-Sm: 7532.100
❏ Wood Cutting Board-Rectangular: 9001.100
❏ Stainless Steel Colander: 8130.100
❏ Hole Cover Plug: 790773-0070A
❏ Top Mount Clip Kit for 1" plus-thick countertop:
790772-0070AA
* See faucet section for available models
© 2008 AS America Inc.
G7
Revised 2/08
9"
(229mm)
18"
(457mm)
22"
(559mm)
11"
(279mm)
3-3/4" (95mm)
3-1/8" (79mm)
3-3/4" (95mm)
CUTOUT AREA
17" X 21"
(432 X 533mm)
3-3/4"
DIA. DRAIN
1-3/8"
DIA.
1-1/16"
DIA.
FINISHED WALL
OR SPLASHBACK
OPTIONAL
8-1/8"
(206mm)
5-3/4"
(146mm)
3/16" (5mm)
7/8" (22mm)
SEALING
COMPOUND
COUNTERTOP
(BY OTHERS)
1-1/2" O.D.
TAILPIECE
36"
(914mm)
SUGGESTED
FINISHED FLOOR
MOUNTING CLIP DETAIL (TYP.)
COUNTERTOP
MTG.
CLIP
ADJ.
SCREW
1-9/16" (40mm)
MAX.
13/16" (21mm)
MIN.
C/L
3" (76mm)
7-9/16"
(192mm)
15-1/8"
(384mm)
17-3/4"
(451mm)
7-5/8"
(194mm)
CUTOUT AREA
(TYPICAL)
3-3/4"
DIA. DRAIN
FINISHED WALL
OR SPLASHBACK
OPTIONAL
7-7/8"
(200mm)
5-3/4"
(146mm)
COUNTERTOP
(BY OTHERS)
1-1/2" O.D.
TAILPIECE
36"
(914mm)
SUGGESTED
FINISHED FLOOR
C/L
SEALING
COMPOUND
MOUNTING CLIP DETAIL (TYP.)
COUNTERTOP
MTG.
CLIP
SCREW
MTG. CLIP
(SEE DETAIL)
SINK
BRASS
INSERT
1/2" MIN.
(13mm)
7507.103 Top Mount
CULINAIRE™ 18"
ISLAND BOWL
18 GAUGE STAINLESS STEEL
NOTES:
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL AND
COUNTERTOP SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ASME A112.19.3.
These measurements are subject to c hange or cancellation. No responsibility
is assumed for use of superseded or voided leaet.
NOTES:
TEMPLATE PROVIDED WITH MOUNTING KIT FOR UNDER-COUNTER
*
CUTOUT VARIATIONS.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL AND
COUNTERTOP SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ASME A112.19.3.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided leaet
© 2008 AS America Inc.
7507.000 Undercounter Mount
G8
Revised 2/08
Loading...