American Standard 730733-0200A, 730673-A070A, 9443.000, 730676-A070A, 9442.000 User Manual
ASSEMBLY & INSTALLATION
INSTRUCTIONS
BATH ACCESSORIES
Towel and Storage Locker 9442.000
Ladder Bath Cabinet 9443.000
Thank you for selecting our products...products which have been the benchmarks of fine
quality for over 100 years. To help insure that the installation process will proceed smoothly,
please read these instructions carefully before you begin. Also, review the recommended
tools and materials list; carefully unpack and examine your new plumbing fixture.
To maintain the beauty of the finish, avoid placing the furniture in direct sunlight, as sunlight causes
fading. Also avoid extreme changes in temperature by arranging furniture away from radiators, heat
and air vents, and air conditioning units. Avoid placing furniture directly under windows.
Recommended Tools & Materials
Tape Measure
Phillips Screwdriver
Rubber Mallet
THE
“ ”
COLLECTION
by
™
LADDER BATH CABINET 9443.000
Roughing-in Dimensions
Your ladder kit includes the following:
18-1/2
(470mm)
54
(1372mm)
20
(508mm)
20
(508mm)
It is recommended that you allow yourself ample
space to work. Assembly is easiest on a smooth,
protected surface.
PARTS LIST
CODE NAME FIGURE QTY
LOWER STORAGE1
2
3
4
5
6
LADDER MOUNTING HARDWARE KIT
CODE NAME FIGURE QTY
FEET
UPPER DISPLAY
SHELF
LOWER DISPLAY
SHELF
RIGHT SIDE
LADDER RAIL
LEFT SIDE
LADDER RAIL
1 PC
4 PCS
1 PC
1 PC
1 PC
1 PC
Product names listed herein are trademarks of American Standard Inc.
© American Standard Inc. 2003
A
B
C
D
E
F
G
- 1 -
SCREWS (a)
STOPPERS
SCREWS (b)
DOWELS
PLASTIC
COVERS
CAM LOCKS
CAM BOLTS
4 PCS
4 PCS
8 PCS
12 PCS
4 PCS
4 PCS
4 PCS
730798-100
1
Shelving Unit Assembly
Insert 8 wooden dowels into drilled holes located on the upper and lower shelves. Lay the right side rail flat with
the drilled side facing up. Slide the upper and lower shelves into place by inserting the wooden dowels into the
drilled dowel holes located on the side ladder rails. Fasten the shelves with 2 large flat head phillips screws.
Repeat the last two steps above to attach the left side ladder rail. Conceal the phillips screws with the plastic
stoppers. Tap the rubber stoppers into place with a rubber mallet.
Stand the shelving unit upright with the back of the unit facing you. Using 8 phillips screws, secure the side
rails to the shelves.
6
D
D
A
B
A
B
3
D
4
D
5
C
C
C
C
2
Drawer Unit Assembly
Screw feet onto base of unit. Stand drawer unit upright.
- 2 -
1
2
730798-100
Loading...