Installation Instructions
MULTIPLE SERVICE LABORATORY FITTINGS
Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--please read these instructions carefully
before you begin.
7272.5117272.510
ROUGHING-IN
DIMENSIONS
5-1/2
140mm
5-3/8
2-3/8
60mm
3-3/16
81mm
7272.510
248mm
31/32
24mm
9-3/4
4-7
1-15/16
49mm
5-3/8
137mm
3/4" DIA
THREE HOLES
16-1/4
413mm
SECTION
TURRET DETAI
1-15/16
8" NPT FEMAL
3
(3 PLACES
A-A
5/16
M968489
2-1/8
54mm
MOUNTING HOLE TEMPLATE
FOR 7272.510 AND 7272.511
ROUGHING-IN DIMENSIONS
7272.511
5-1/2
5-3/8
137m
INDEX 'GA
3-3/16
[81mm
TOOLS AND SUPPLIES REQUIRED
9-3/4
248mm
124mm
152mm
1-1/2
38mm
1
406mm
SECTION
TURRET DETAI
1-15/16
8" NPT FEMAL
3
(3 PLACES
A-A
1-5/16
33mm
2-1/8
54mm
Channel Locks
INSTALL FITTING [7272.510 & 7272.511]
1
IMPORTANT: FLUSH ALL SUPPLY LINES PRIOR TO FITTING INSTALLATION.
Adjustable Wrench
Drill three 3/4" [19mm] Dia. holes using template provided or
measurements as indicated through mounting surface.
Apply putty to underside of fitting base to assure a good seal
and level fit.
Place body shanks through holes in deck and assemble
steel mounting plate and lock nuts to body shanks. Tighten
fitting to mounting surface.
Pipe to correct service to complete installation.
After installation is complete turn service on and check all
connections for leaks.
PUTT
BODY SHAN
Drill
Teflon Tape
Plumbers' Putty or
Caulking
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR
WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: CLEAN THE PRODUCT WITH SOAPS, ACID,
POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH
WITH A COARSE SURFACE.
3/4" [19mm
Dia. MTG HOLE
CARE INSTRUCTIONS:
TEE
LOC
NUT
MOUNTIN
M968489