American Standard 7236VC, 7236V.002 User Manual

EVOLUTION™ 6' X 36"

Comfortable bathing design with form-tted backrest and molded-in armrests

EVOLUTION™ 6' X 36"

WHIRLPOOL AND BATHING POOL

HIGH GLOSS

❏ 7236VC Whirlpool w/EverClean

System

• EverClean® System

• Acrylic with berglass reinforcement

• 2.1 HP self-draining pump/motor

• Ten ow adjustable jets including:

- Two adjustable Comfort Jets™ Hi Flo

- Eight adjustable Comfort Jets™

• Three silent air volume controls

• Side-mounted On/Off control

• Deep Soak Overow Drain for maximum water depth

• Complete factory installed and tested whirlpool system

• Self leveling feet

• Undermount installation option

• Quick connect whirlpool heater system (must order whirlpool heater separately)

❏ 7236V Whirlpool

• Same as above without the EverClean® System

❏ 7236V.002 Bathing Pool

Nominal Dimensions:

72" x 36" x 21-1/4" (1829 x 914 x 540mm)

American Standard whirlpools with EverClean® incorporate a patented silver-ion additive right into the circulation piping to protect the pipes from mold, mildew, algae and fungus that could cause deterioration or staining of the pipes.

Compliance Certications Meets or Exceeds the Following Specications:

• Underwriters Laboratories - Hydromassage

Bathtubs UL 1795

• ASME A112.19.7M for Whirlpool Appliances

• ANSI Z124.1 for Plastic Bathtubs

• ASTM E162 for Flammability

• NFPA 258 for Smoke Density

SEE REVERSE FOR ROUGHING-IN DIMENSIONS AND PRODUCT SPECIFICATIONS

Components Required:

❏ Bath Filler*: (specify nish) ❏ Bath Drain: 1599.205.XXX (specify color)

Custom Accessories Available:

❏ Six Foot Apron: 9271.019.XXX (specify color) ❏ Safe-T-Heater Whirlpool Heater: 9075.120 ❏ Tile Bead Kit: 751755-100

* See American Standard Faucet Selector

For color/nish availability and other faucet choices, please see the Product Selector and Pricing Guide.

NOTE: Whirlpool Heater is designed to maintain water temperature during operation. It will not heat cold water to desired bathing temperature.

H95

Revised 4/06

EVOLUTION™ 6' X 36"

GENERAL SPECI FICATI ONS FO R 7236V WHIRL POOL

WHIRLPO OL ELE CTRICA L SPEC IFICATI ONS

PUM P

72 x 3 6 x 21 -1/2 I n. (18 29 x 914 x 546mm)

106 Lb s. (48 Kg.)

1031 L bs. (4 67 Kg. )

111 Ga l. (42 0 L)

53 Gal . (201 L)

53-1/2 x 26- 1/4 In . (135 9 x 667mm)

64-1/2 x 30 In. (1 638 x 762mm)

18-1/2 In.(4 70mm)

57 Lb s./Sq. Ft. (2 80 Kgs ./Sq.m)

2.1 H P, 14 .4 AMPS ,1 20 V.

INS TA LL ED S IZE WEI GH T WEI GH T w/ WA TER GAL . TO O VE RFLOW WHI RL PO OL M IN. O PE RA TI NG V OL. BAT HI NG W EL L AT SU MP BAT HI NG W EL L AT RI M WAT ER D EP TH TO O VE RF LO W FLO OR L OA DI NG (PR OJ EC TE D AREA)

36"

(914mm)

21-1/2"(H)

(546mm)

20"(C)

(508mm)

20-1/8"(A)

(511mm)

DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7.

C/L OF

OVERFLOW

72"

(1829mm)

36"

(914mm)

7-3/4"

(197mm)

11"

(279mm)

(76mm)

3-1/4"

(83mm)

(152mm)

13-3/4"

(349mm)

CUT OUT IN FLOOR

FOR DRAIN

GENERAL SPECIFICATIONS FOR 7236V BATHING POOL

72 x 36 x 21-1/2 (1829 x 914 x 546mm)

91 Lbs. (41 Kg.)

1016 Lbs. (461 Kg.)

111 Gal. (420 L.)

53-1/2 x 26-1/4 In. (1359 x 667mm)

64-1/2 x 30 In. (1638 x 762mm)

18-1/2 (470mm)

56 Lbs./Sq.Ft. (275 Kgs./Sq.m)

INSTAL LED SI ZE WEIGHT WEIGHT w/WAT ER GAL. T O OVER FLOW BATHIN G WELL AT SU MP BATHIN G WELL AT RI M WATER DEPTH TO OVE RFLOW FLOOR LOADIN G

(PROJE CTED A REA)

WHIRLPOOL AND BATHING POOL

HIGH GLOSS

NOTES:

BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND OR PENINSULA T YPE INSTALLATION. SUMP OF BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIAL BY OTHERS.

■REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL, DECK MOUNTED SPOUT AND INTEGRATED BATH

FILLER FOR ADDITIONAL INFORMATION.

OPTIONAL 3-WALL TILING BEAD KIT No. TILE-BEAD AND APRON No. 6FT-APRON MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1 These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaet.

H96

Revised 3/06