American Standard 7236.028WC User Manual
VIRTUOSO™ WHIRLPOOL
❏ 7236.028WC Whirlpool featuring System II
• Acrylic with berglass reinforcement
• EverClean® System
• Pre-leveled tub bottom
• Two person design with center drain and dual
lumbar ends
• Wave style grab bar
• 2.1 HP, two speed, self-draining pump/motor
with pulse feature
• Factory installed power cord and plug
• Ten multi-directional and ow-adjustable
jets including:
- Two Ideal-ow jets
- Six body massage jets
- Two recessed back-rest jets
• Deck-mounted electronic control with 20 minute
built-in timed safety shut off and Chrome Bezel
• Three silent air volume controls
• Quick Connect Safe-T-Heater
connection system
• Factory installed and tested whirlpool system
Nominal Dimensions:
1829 x 914 x 540mm
(72" x 36" x 21-1/4")
Compliance Certications Meets or Exceeds the Following Specications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
American Standard whirlpools and air baths with
EverClean® incorporate a patented silver-ion
additive right into the circulation piping to protect
the pipes from mold, mildew, algae and fungus that
could cause deterioration or staining of the pipes.
VIRTUOSO™
WHIRLPOOL
HIGH GLOSS
To Be Specied - Required:
❏ Color:
❏ Bath Filler: (specify nish)
❏ Bath Drain: 1583.470 (specify nish)
To Be Specied - Optional:
❏ Safe-T-Heater*: 9075.120
❏ Symphony 6' Apron: 0727.200 (specify color)
❏ Universal Tile Bead Kit: 751755-100
❏ System II Control Bezel: 9861.100 (specify nish)
For color/nish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
* NOTE: the Safe-T-Heater is designed to maintain water
temperature during operation. It will not heat cold water to
desired bathing temperature.
SEE REVERSE FOR PRODUCT DIMENSIONS
AND SPECIFICATIONS
© 2008 AS America Inc.
H41
Revised 2/08
VIRTUOSO™
182 9m m
(72 )
914 mm
(36 )
914 mm
(36 )
279 mm
(11 )
102 mm
(4)
470 mm
(18 -1 /2 )
19mm
(3/4)
TYP.
178mm X 356m m
(7 x 1 4) CUT OUT
OUTLIN E OF C UTOUT
1791mm X 876 mm
(70-1/ 2 X 34 -1/2)
PUMP
ON/ OF F
SWITCH
C/L O F
DRA IN
51mm
(2)
489mm
(19-1/4)
ROUGH FLOOR
1-1/2 O.D.
TAILPIECE
76mm
(3)
PROVIDE ACCESS
TO PUMP FOR SERVICE
ON ALL INSTALLATIONS
540mm
21-1/4
C/L OF
OVERFLOW
SAFE-T-HEATER
REMOVABLE BLANK
1-1/2 N.P.T. THREAD
INTEGRAL
FEET
LEVELING
STRINGER
NOT FOR
SUPPORT
44mm
(1-3/4)
89mm
(3-1/2)
REC OM ME NDED
FIT TI NG LOCA TI ON
64 X 27 9mm ( 2- 1/ 2 X 1 1)
GENERA L SPECI FICATI ONS FO R 7236 WHIRL POOL
WHIRLP OOL ELE CTRICA L SPEC IFICAT IONS
SYS TE M II P UM P
72 x 3 6 x 21 -1/4 In. (1 829 x 914 x 540mm )
101 Lb s. (45 Kg.)
751 Lb s. (33 8 Kg.)
78 Gal . (296 L)
69 Gal . (262 L)
46 x 1 8 In. (1168 x 457 mm)
66 x 3 0-1/2 In. (1676 x 775mm )
15-3/4 In.(4 00mm)
42 Lb s./Sq. Ft. (204 Kg s./Sq. m)
25.6
49.4
2.1 H P, 15 .6 A MP S, 120V.
INS TA LL ED S IZ E
WEI GH T
WEI GH T w/ WA TE R
GAL . TO O VE RF LO W
WHI RL PO OL M IN . OP ERATING V OL .
BAT HI NG W EL L AT S UMP
BAT HI NG W EL L AT R IM
WAT ER D EP TH T O OV ERFLOW
FLO OR L OA DI NG
(PR OJ EC TE D AR EA )
PTS .
CUBE (FT3)
WHIRLPOOL
HIGH GLOSS
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND OR PENINSULA T YPE INSTALLATION. SUMP
OF BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIAL BY OTHERS.
■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL, DECK MOUNTED SPOUT AND INTEGRATED BATH
FILLER FOR ADDITIONAL INFORMATION.
OPTIONAL 3-WALL TILING BEAD KIT NO. 751755-100 AND APRON No. 0727.200 MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
● FITTINGS AND TWIST GRAB BAR NO. 750565 -000 NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
● IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING
SYSTEM PIPING, DRAIN OVERFLOW, AND APRON INSTALLATION. MOUNTING HOLES DRILLED BY INSTALLER.
ON SYSTEM I I: CONTROL MODULE TO BE MOUNTED BEHIND ACCESS PANEL, A MINIMUM OF 152mm (6) ABOVE ROUGH FLOOR.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaet.
© 2008 AS America Inc.
H42
Revised 2/08
Loading...