American Standard 7196.011, 7196.815, 7196.814, 7196.813 User Manual
SILHOUETTE™ 38" DUAL LEVEL KITCHEN SINK
• Americast® brand engineered material
• Dual level double bowl design
• Titanium enamel - heat resistant up to 1000°
• Acid-resisting glossy porcelain nish
• Tile-edge installation
• Fits most standard 36" cabinet bases
• Silicone Sealant supplied
• Available in 1, 3, 4, or 5 faucet hole
conguration
• Customized hole punchings available
(see page G56)
Tile Edge:
❏ 7196.011 Center hole only
❏ 7196.813 3 hole
❏ 7196.814 4 hole
❏ 7196.815 5 hole
SILHOUETTE™ 38"
DUAL LEVEL SINK
AMERICAST
®
Nominal Dimensions:
965 x 559 x 241mm
(38" x 22" x 9-1/2")
Bowl sizes:
Right Hand: 318mm (12-1/2") wide
413mm (16-1/4") front to back
178mm (7") deep
Left Hand: 527mm (20-3/4") wide
476mm (18-3/4") front to back
229mm (9") deep
Compliance Certications Meets or Exceeds the Following Specications:
• ASME A112.19.4M for Americast Plumbing Fixtures
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
SEE REVERSE SIDE FOR ROUGHING-IN DIMENSIONS
To Be Specied:
❏ Color:
❏ Faucet*:
❏ Faucet Finish:
❏ Basket Strainer: 4331.013
❏ Soap Dispenser: 4503.115, (specify color):
❏ Traps:
Optional Accessories:
❏ Large Wood Cutting Board: 9000.250
❏ Small Wood Cutting Board: 9000.185
❏ Colander for Cutting Board: 8102.100, Color:
❏ Large Colander: 8103.100, Color:
❏ Web Cover: 8106.100, Color:
❏ Bottom Sink Rack (Left): 7407.100, Color:
© 2008 AS America Inc.
* See faucet section for available models
G21
Revised 2/08
7196.813/814/815
3-1 /2 "
(89 mm )
DIA .
2-1 /8 "
(54 mm )
2" ( 51 mm)
OPT IO NAL
FIN IS HED W AL L
OR SP LASHB AC K
7-7 /8 "
(20 0m m)
8-1 /8 "
(20 6m m)
1-1 /2 "(38mm ) DIA.
HOL ES TYP.
C/L
3/1 6"
(5m m)
12- 1/ 4"
(31 1m m)
11- 1/ 8"
(28 3m m)
19"
(48 3m m)
38"
(96 5m m)
9-1 /8 "
(23 2m m)
5-3 /4 "
(14 6m m)
SEA LI NG
COM PO UND
7-1 /8 "
(18 1m m)
36" (9 14mm)
SUG GE STED
FIN IS HED
FLO OR
TIL ED COUN TE RTOP
(BY O THERS )
22"
(55 9m m)
*C UT OUT N OT E
719 6. 814
4 H OL E
719 6. 815
5 H OL E
1-1 /2 " O.D. T AILPI EC E
5-3 /4 "
(14 6m m)
4"(10 2m m)4"(10 2m m) 4"(10 2m m)
4"(10 2m m)
3/8 "
(10 mm )
SILHOUETTE™ 38"
DUAL LEVEL SINK
AMERICAST
®
© 2008 AS America Inc.
NOTES:
COUNTERTOP CUTOUT 933mm x 527mm x 25mm RADIUS
*
(36-3/4 X 20-3/4 WITH 1" RADIUS) AT CORNERS.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
G22
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL AND
COUNTERTOP SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ASME Standard A112.19.4
These measurements are subject to c hange or cancellation. No responsibility
is assumed for use of superseded or voided leaet.
Revised 2/08
Loading...