American Standard 7179.815, 7179.814, 7179.011, 7179.813 User Manual

SILHOUETTE™ 33" DUAL LEVEL KITCHEN SINK

• Americast® brand engineered material

• Dual level double bowl design

• Titanium enamel - heat resistant up to 1000°

• Acid-resisting glossy porcelain nish

• Tile edge installation

• Silicone sealant supplied

• Available in 1, 3, 4, or 5 faucet hole conguration

• Customized hole punchings available (see page G56)

Tile Edge:

❏ 7179.011 Center hole only ❏ 7179.813 3 hole ❏ 7179.814 4 hole ❏ 7179.815 5 hole

SILHOUETTE™ 33"

DUAL LEVEL SINK

AMERICAST

Nominal Dimensions:

838 x 559 x 241mm (33" x 22" x 9-1/2")

Bowl sizes:

Right Hand: 191mm (7-1/2") wide 413mm (16-1/4") front to back 178mm (7") deep Left Hand: 527mm (20-3/4") wide 476mm (18-3/4") front to back 229mm (9") deep

Compliance Certications Meets or Exceeds the Following Specications:

• ASME A112.19.4M for Americast Plumbing Fixtures

• ASTM E162 for Flammability

• NFPA 258 for Smoke Density

SEE REVERSE SIDE FOR ROUGHING-IN DIMENSIONS

To Be Specied:

❏ Color: ❏ Faucet*: ❏ Faucet Finish: ❏ Basket Strainer: 4331.013 ❏ Soap Dispenser: 4503.115, (specify color): ❏ Traps:

Optional Accessories:

❏ Large Wood Cutting Board: 9000.250 ❏ Small Wood Cutting Board: 9000.185 ❏ Colander for Cutting Board: 8102.100, Color: ❏ Large Colander: 8103.100, Color: ❏ Web Cover: 8106.100, Color: ❏ Bottom Sink Rack (Left): 7407.100, Color:

* See faucet section for available models

G25

Revised 2/08

7179.813/814/815

FIN IS HE D WALL OR SP LA SH BACK

C/L

SEA LI NG COM PO UND

FIN IS HED

FLO OR

*C UT OU T

NOT E

717 9. 81 4 4 H OL E

1-1/2" O.D. TAILPIECE

3/8 " (10 mm )

717 9. 81 5

5 H OL E

TIL ED

COU NT ER TO P

(BY O TH ER S)

2-1 /8 " (54 mm )

1-1 /2 " ( 38 mm) DIA . HO LE S TYP.

(10 2m m)

5/8 "

(16 mm )

2" ( 51 mm )

OPT IO NA L

7-7 /8 "

(20 0m m)

8-1 /8 "

(20 6m m)

3-1 /2 " (89 mm ) DIA .

9-3 /4 "

(24 8m m)

11- 1/ 8"

(28 2m m)

16- 1/ 2"

(41 9m m)

33"

(83 8m m)

22"

(55 9m m)

(15 2m m)

5-3 /4 "

(14 6m m)

36" (9 14 mm )

SUG GE ST ED

9-1 /8 "

(23 2m m)

5-3 /4 "

(14 6m m)

SILHOUETTE™ 33"

DUAL LEVEL SINK

AMERICAST

NOTES:

COUNTERTOP CUTOUT 80 6mm X 527mm WITH 25mm RADIUS

(31-3/4 X 20-3/4 WITH 1" RADIUS) AT CORNERS.

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL AND COUNTERTOP SUPPORTS.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ASME Standard A112.19.4 These measurements are subject to c hange or cancellation. No responsibility is assumed for use of superseded or voided leaet.

G26

Revised 2/08