American Standard 7163.804, 7163.803, 7163.001, 7163.805 User Manual
SILHOUETTE™ 33" SHALLOW DOUBLE BOWL
•
When installed so top of sink is 876mm (34-1/2") from finished floor.
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 ACCESSIBLE AND USEABLE BUILDINGS AND
FACILITIES - CHECK LOCAL CODES.
BARRIER FREE
KITCHEN SINK
• Americast® brand engineered material
• Dual level double bowl design
• Titanium enamel - heat resistant up to 1000°
• Acid-resisting glossy porcelain nish
• Top mount or undercounter installation
• Silicone sealant supplied
• Available in 1, 3, 4, or 5 faucet hole conguration
• Customized hole punchings available
(see page G56)
Top Mount/Undercounter:
❏ 7163.001 Center hole only
❏ 7163.803 3 hole
❏ 7163.804 4 hole
❏ 7163.805 5 hole
Nominal Dimensions:
838 x 559 x 152mm
(33" x 22" x 6")
Bowl sizes:
Right Hand: 359mm (14-1/8") wide
413mm (16-1/4") front to back
152mm (6") deep
Left Hand: 359mm (14-1/8") wide
476mm (18-3/4") front to back
152mm (6") deep
Undercounter Installation Order:
❏ 791326-100 Mounting Kit (consists of
cut-out template and mounting clips)
SILHOUETTE™ 33"
SHALLOW DOUBLE BOWL SINK
AMERICAST
Silhouette Shallow Double Bowl
Compliance Certications Meets or Exceeds the Following Specications:
• ASME A112.19.4M for Americast Plumbing Fixtures
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
SEE REVERSE SIDE FOR ROUGHING-IN DIMENSIONS
®
To Be Specied:
❏ Color:
❏ Faucet*:
❏ Faucet Finish:
❏ Basket Strainer: 4331.013
❏ Soap Dispenser: 4503.115, Color:
❏ Traps:
* See faucet section for available models
© 2008 AS America Inc.
Optional Accessories:
❏ Large Wood Cutting Board: 9000.250
❏ Small Wood Cutting Board: 9000.185
❏ Colander for Cutting Board: 8102.100, Color:
❏ Large Colander: 8103.100, Color:
❏ Web Cover: 8106.100, Color:
❏ Bottom Sink Rack (Left): 7405.100, Color:
❏ Bottom Sink Rack (Right): 7406.100, Color:
G31
Revised 2/08
7163 .804
4 HO LE
7163 .805
5 HO LE
7163 .001
CHO
C/L
FINI SHED W ALL
OR S PLASHB ACK
1-1/ 2" O.D.
TAIL PIECE
FINI SHED F LOOR
COUN TERTOP
(BY OTHERS )
SEAL ING
COMP OUND
*CU TOUT N OTE
1/2"
(13m m)
5-3/4 "
(146m m)
5-1/2 "
(140m m)
16-1 /2"
(419 mm)
33"
(838 mm)
3-1/ 2"
(89m m)
DIA.
1-1/ 2" (38m m)
RAD. TYP.
7-7/ 8"
(200 mm)
8-5/ 8"
(219 mm)
7-7/ 8"
(200 mm)
10-1 /8"
(257 mm)
22"
(559 mm)
34"
(864 mm)
2-1/ 8"
(54m m)
1-1/ 2" (38m m)
DIA. HOLES TYP.
4" (1 02mm)
4"
(102 mm)
4"(10 2mm)
4"(10 2mm)
2" (5 1mm)
OPTI ONAL
7163 .804
4 HO LE
7163 .805
5 HO LE
7163 .001
CHO
C/L
FINI SHED W ALL
OR S PLASHB ACK
FINI SHED F LOOR
COUN TERTOP
(BY OTHERS )
SEAL ING
COMP OUND
*CU TOUT N OTE
DETAIL OF M OUNTIN G CLI P
(KIT N o.791 002-10 0)
BRASS
INSERT
3/4"
(19mm)
MIN.
REFER TO IN STRUCT IONS
PROVID ED WI TH KIT FOR
ADDITI ONAL INFORM ATION
CLIP
MACH.
SCREW
SINK
2-1/ 8"
(54m m)
1-1/ 2" (38m m)
DIA. HOLES TYP.
4" (1 02mm)
4"
(102 mm)
4"(10 2mm)
4"(10 2mm)
2" (5 1mm)
OPTI ONAL
16-1 /2"
(419 mm)
33"
(838 mm)
36"
(914 mm)
5-3/ 4"
(146 mm)
6"
(152 mm)
7-7/ 8"
(200 mm)
10-1 /8"
(257 mm)
22"
(559 mm)
3-1/ 2"
(89m m)
DIA.
1-1/ 2" (38m m)
RAD. TYP.
7-7/ 8"
(200 mm)
8-5/ 8"
(219 mm)
1-1/ 2" O.D.
TAIL PIECE
SILHOUETTE™ 33"
SHALLOW DOUBLE BOWL SINK
7163. Series
NOTES:
COUNTERTOP CUTOUT 527 X 806mm WITH 25mm
*
(20-3/4 X 31-3/4 WITH 1) RADIUS AT CORNERS.
SUPPLIES NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL AND
COUNTERTOP SUPPORTS.
AMERICAST
®
© 2008 AS America Inc.
Undercounter Mount
NOTES:
TEMPLATE PROVIDED WITH MOUNTING KIT 791326-100 FOR
*
UNDERCOUNTER FAUCET DECK CUTOUT VARIATIONS.
SUPPLIES NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL AND
COUNTERTOP SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ASME Standard A112.19.4
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided leaet.
G32
Revised 2/08
Loading...