American Standard 7055.115, 7056.105, 7055.105, 7056.205, 705.205 User Manual

...

SELECTRONIC

Installation Instructions

Proximity Integrated Faucet

7055.105

7055.115

7055.205

7055.215

with Optional Above-Deck Mixing

• Flexible Selectronic

• Easy installation. All electronics in the spout; nothing below deck.

• User adjustable above-deck mixing uses ceramic disc valve for dependability & long life

• Mixing handle can be removed for one time temperature setting during installation

• Available in DC (Battery) & AC versions

Platform with Universal Sensor

7056.105

7056.115

7056.205

7056.215

Product No.'s & Options

Speciﬁcations

How to Install

Maintenance

FAQ,s

Replacement Parts

M 9 6 52 5 5 RE V. 1.6

Installation Instructions

NOTE TO INSTALLER: Please give this manual to the customer after installation.

To l ea r n mo re a bo u t A me ri c an S ta nd ar d Fa u ce ts v i si t ou r we b si te at : www.americanstandard-us.com or U.S. customer's e-mail us at: faucetsupport@americanstandard.com

2-3

3-7

7-8

Certiﬁed to comply with ASME A112.18.1M

For Parts, Service, Warranty or other Assistance, please call

1-800-442-1902 (In Canada: 1-800-387-0369)

(In Toronto Area only: 1-905-3061093)

Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years. To ensure

In sta lla ti on Ins tru cti on s

that your installation proceeds smoothly--please read these instructions carefully before you begin.

UNPACKING

All American Standard Faucets Are Water Tested At Our Factory. Some Residual Water May Remain In The Faucet During Shipping.

1. R e mo v e t he f i tt i n g a nd l o os e i t e ms f r o m t h e c a r to n . T h e i l l u s t ra t i o n be l o w s h o w s t h e f it t in g a n d al l l o o s e i t e m s after they have been removed from the carton. Some items may be packaged partially assembled to other items.

1. Selectronic Spout Assembly

2. Mounting Kit

3. Battery (7055 Series)

3a. AC Power Supply (7056 Series)

4. 4" Deck plate (optional must be ordered separately)

5. Mixing Valve (optional must be ordered separately)

6. Key for vandal resistant aerator

7. Installation Instructions

8. Hose Adapters

Less Mixing With Above-Deck Mixing

PRODUCT No.s PRODUCT No.s

7055.105

7055.115

7056.105

7056.115

DO NOT REMOVE

PROTECTIVE FILM

FROM SENSOR EYE

UNTIL INSTALLATION

IS COMPLETE.

7055.205

7055.215

7056.205

7056.215

DO NOT REMOVE

PROTECTIVE FILM

FROM SENSOR EYE

UNTIL INSTALLATION

IS COMPLETE.

SELECTRONIC Proximity Integrated Faucet

with Optional Above-Deck Mixing

Platform with Universal Sensor

• Flexible Selectronic

• Easy installation. All electronics in the spout; nothing below deck.

• User adjustable above-deck mixing uses ceramic disc valve for dependability & long life

• Mixing handle can be removed for one time temperature setting during installation

• Available in DC (Battery) & AC versions

Product No.'s & Options

Speciﬁcations

How to Install

Maintenance

FAQ,s

Replacement Parts

M965255 REV. 1.6

Installation Instructions

NOTE TO INSTALLER: Please give this manual to the customer after installation.

To lea r n m o r e a bo u t A me r i ca n St a nd a rd Fa u c et s v i s it ou r we b si t e a t : www.americanstandard-us.com or U.S. customer's e-mail us at: faucetsupport@americanstandard.com

For Parts, Service, Warranty or other Assistance, please call

1-800-442-1902 (In Canada: 1-800-387-0369)

(In Toronto Area only: 1-905-3061093)

705P400

Deck Plate Mixing ValveBase Product

605XTMV

3 3

7055.105

7055.205

7055.115

7055.215

7056.105

7056.205

7056.115

7056.215

2-3

3-7

7-8

Certiﬁed to comply with ASME A112.18.1M

SELECTRONIC Proximity Integrated Faucet

with Optional Above-Deck Mixing

• Flexible Selectronic

• Easy installation. All electronics in the spout; nothing below deck.

• User adjustable above-deck mixing uses ceramic disc valve for dependability & long life

• Mixing handle can be removed for one time temperature setting during installation

• Available in DC (Battery) & AC versions

Product No.'s & Options

Speciﬁcations

How to Install

Maintenance

FAQ,s

Replacement Parts

M965255 REV. 1.6

Installation Instructions

NOTE TO INSTALLER: Please give this manual to the customer after installation.

To lea r n m o r e a bo u t A me r i ca n St a nd a rd Fa u c et s v i s it ou r we b si t e a t : www.americanstandard-us.com or U.S. customer's e-mail us at: faucetsupport@americanstandard.com

For Parts, Service, Warranty or other Assistance, please call

1-800-442-1902 (In Canada: 1-800-387-0369)

705P400

Platform with Universal Sensor

(In Toronto Area only: 1-905-3061093)

7055.105

7055.205

7055.115

7055.215

7056.105

7056.205

7056.115

7056.215

2-3

3-7

7-8

Certiﬁed to comply with ASME A112.18.1M

M965255 REV. 1.6

Roughing-in Dimensions

Fig. 1

FINISHED WALL

OR BACKSPLASH

MIN. 1" CLEARANCE

3/8" COMPRESSION

CONNECTORS

191mm

(7-1/2)

140mm

(5-1/2)

38mm

(1-1/2 )

457mm

(18)

165mm

(6-1/2)

191mm

(7-1/2)

MOUNTING

66mm

( 2-5/8)

32mm (1-1/4)

SURFACE

GENERAL DESCRIPTION:

Electronic faucet with proximity operation. Vandal resistant solid brass construction single post mounting. Operates on DC (battery) or AC power. Inlets 3/8" compression, built-in checks, flexible stainless steel 18" reach inlet hoses for spout connection and In-line integral strainer for solenoid.

TOOLS REQUIRED; Fig. 2

1 Hex Wrench (Included) 2 Adjustable Wrench 3 Plumbers' Putty or Caulking

4 Phillips Screwdriver 5 Tape Measure

INSTALLATION

INSTALL SPOUT ASSEMBLY;

Fig. 1

1. Make sure O-RING SEAL (9) is installed.

2. Installation with ESCUTCHEON (1) (optional). Apply a

bead of putty to bottom edge of ESCUTCHEON with PUTTY PLATE (1). (Only if mounting surface is uneven).

3. Insert supply HOSES (2), SHANK (3) and POWER CORD (10) (if equipped) through hole in ESCUTCHEON with PUTTY

PLATE (1) and mounting surface. Follow mounting instructions below to secure faucet to mounting surface.

(Make sure PIN (7) is in back).

4. Installation less ESCUTCHEON (1). IMPORTANT: Do not use putty when installing faucet without escutcheon.

5. Assemble RUBBER WASHER (4), BRASS WASHER (5) and THREADED LOCKNUT (6) onto SHANK (3) from

underside of sink or mounting surface. Hand tighten LOCKNUT (6).

6. Use a screwdriver to tighten SCREWS (8) on LOCKNUT (6). Work your way around LOCKNUT (6), tightening the screws slightly each time until all are snug to ensure even pressure.

CONNECT POWER SUPPLY; Fig. 1a

CAUTION

(7056 series only)

1. Connect the sensor cable (1) to the POWER SUPPLY CABLE (2).

Turn off hot and cold water supplies before beginning

Fig. 2

Fig. 1

Fig. 1a

IMPORTANT: Do not

use putty when installing

faucet without escutcheon.

PUTTY

(If required)

9 3

4 5 6

(OPTIONAL)

MOUNTING SURFACE

TIGHTEN SPIN NUTS

10'

2. Code approved Electrical Outlet provided by others. (120V 50/60 Hz)

3. Plug AC POWER SUPPLY (3) into Outlet.

ELECTRICAL OUTLET (120V 50/60 Hz)

M965255 REV. 1.6

+ 6 hidden pages