American Standard 7048.001, 7048.803, 7048.804 User Manual
CHANDLER™ DOUBLE BOWL KITCHEN SINK
7-1/ 8"
(181 mm)
(2) 1-1/2 " O.D.
TAIL PIECE
10-1 /8"
(257 mm)
5-3/ 4"
(146 mm)
Y
COUN TERTO P
(BY OTHER S)
5-3/ 4"
(146 mm)
36" ( 914mm )
SUGG ESTED
FINI SHED
FLOO R
8-1/ 8"
(206 mm)
3/8"
(10m m)
4"
(102 mm)
HOT
COLD
FINI SHED WALL O R
SPLA SH BA CK
4"
(102 mm)
3-1/ 2"
(89m m) DI A.
4-1/ 4"
(108 mm)
4"
(102 mm)
11"
(279 mm)
18"
(457 mm)
1-3/ 8" (35 mm) D IA.
HOLE S TYP.
8-3/ 4"
(222 mm)
C/L
SPRA Y
7048 .804
4 HO LE
VARI ATION
1-3/ 4"
(44m m) DI A.
2"
(51m m) OP TIONAL
22"
(559 mm)
CUTO UT
NOTE
*
1-1/ 2" REF .
(38m m)
SEAL ING
COMP OUND
36"
(914 mm)
4-1/ 2"
(114 mm)
9-1/ 2"
(241 mm)
1" (2 5mm)
RAD. TYP.
• Dupont Corian® surface
• Double bowl design
• Top mount
• Silicone sealant supplied
• Available in center hole only, 3, or 4 faucet
hole conguration
❏ 7048.001 Center hole only
❏ 7048.803 3 hole
❏ 7048.804 4 hole
Nominal Dimensions:
914 x 559 x 254mm
(36" x 22" x 10-1/2")
Bowl sizes:
Right Hand: 359mm (14-1/8") wide
413mm (16-1/4") front to back
203mm (8") deep
Left Hand: 432mm (17") wide
476mm (18-3/4") front to back
254mm (10") deep
CHANDLER™
DOUBLE BOWL SINK
DUPONT CORIAN
®
Compliance Certications Meets or Exceeds the Following Specications:
• ANSI Z124.6 for Non-Metallic Sinks
To Be Specied:
❏ Color:
❏ Faucet*:
❏ Faucet Finish:
❏ Basket Strainer: 4331.013
❏ Soap Dispenser: 4503.115
❏ Traps:
* See faucet section for available models
© 2008 AS America Inc.
NOTES:
SELF- RIMMING: FOR COUNTERTOP CUTOUT AND INSTALLATION
*
INSTRUCTIONS USE TEMPLATE SUPPLIED WITH SINK.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL AND
COUNTERTOP SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard Z124.6
These measurements are subject to c hange or cancellation. No responsibility
is assumed for use of superseded or voided leaet.
G11
Revised 6/06
Loading...