American Standard 7031 User Manual

TRIUMPH™

MODEL NUMBER:

7031 Pressure Balance Tub and Shower Set

Easy Clean showerhead. I.P.S. diverter tub spout.
Polished Chrome finish.

PRODUCT FEATURES:

Solid Brass Construction:

Durable, ideal material for

prolonged contact with water.

Ceramic Disc Valve Cartridge: Assures a lifetime of

smooth handle operation and drip-free performance.

Pressure Balancing Valve: Maintains output

temperature in response to changes in relative hot and
cold supply pressure. Diaphragm system engineered to
eliminate cross flow and spool "thumping". Avoids failure
due to mineral deposits - ideal for use with hard water.

Adjustable Hot Limit Safety Stop:

Limits the

amount of hot water allowed to mix with cold. Reduces
the risk of accidental scalding.

Integral Plaster Guard and Mounting Plate:

Plaster guard designed to protect valve during installation
and to serve as a mounting plate for thin wall installations.

Lifetime Finishes: Won't peel, tarnish or scratch.
Lifetime Warranty on Function and Finish.

GENERAL DESCRIPTION:

Cast brass valve body. Washerless 47mm ceramic disc

valve cartridge with volume control. Hot limit safety stop.
Pressure balancing cartridge maintains constant output
temperature in response to changes in relative hot and
cold supply pressures. 1/2" female I.P.S. inlets/outlets.
Easy clean showerhead has 2.5gpm/9.5L/min. flow
restrictor. Metal lever handle. Rough-in plaster guard
designed for use as thin-wall mounting adaptor. I.P.S.
diverter tub spout.

SUGGESTED SPECIFICATION:

Bath/shower fitting shall be cast brass construction. Easy clean showerhead and I.P.S. diverter tub spout. Fitting shall be equipped
with pressure balancing cartridge engineered to eliminate cross flow and avoid failure due to mineral deposits. Fitting shall be
equipped with a pressure balancing mechanism and hot limit safety stop. Fitting shall be American Standard Model # 7031.

5-1/8"

(130mm) REF.

4"

(102mm)

1/2" NPT''

3-3/8"

(86mm)

3-3/8"

(86mm)

H

C

O

FF

FINISHED WALL

TOP OF TUB RIM

BOTTOM OF TUB

74" (1931mm)
FOR HEAD
CLEARANCE

4-1/4" (108mm)

REF.

18" (45mm)
OPTIONAL

1/2" NPT

7-5/8”

(194mm)

3-3/4" REF.

(95mm)

6" (152mm)

REF.

"SEE ILLUSTRATION "

3/4" TO 2-3/8"
(19mm-60mm)

SHR

TUB

OPTIONAL TO FINISHED

FLOOR USUALLY

BETWEEN 65'' AND 80''

(1651mm-2083mm)

INLETS 1/2" NPT

OUTLETS
1/2" NPT

THREADED INLETS

ANTI-SCALD PRESSURE BALANCE TUB & SHOWER SET

© 2008 AS America, Inc.

HD-43

TRIUMPH™

FLOW RATE*

GALLONS PER MINUTE

I N L E T P R E S SU R E ( PS I )

*Flow rates shown are for mixed hot and cold.

0

2

4

6

8

Shower

Spout

10080604020

7031

Pressure Balance Bath/Shower. Female I.P.S. inlets/outlets. Easy clean showerhead. I.P.S. diverter
tub spout.

Polished Chrome finish.

CODES AND STANDARDS

These products meet or exceed the following
codes and standards:

ANSI A117.1
ASME A112.18.1
CSA B 125
ASSE 1016

Product
Number

Description

Meets the American Disabilities Act Guidelines and ANSI A117.1
Requirements for the physically challenged.

ANTI-SCALD PRESSURE BALANCE TUB & SHOWER SET

© 2008 AS America, Inc.

HD-44