American Standard 7028.201 User Manual

GENERAL DESCRIPTION:

Durable cast brass spout and metal lever handles. Cast brass waterway with one-half inch male inlet shanks and brass coupling nuts. 1/4 turn washerless ceramic disc valve cartridges. 20 inch (500mm) long flexible stainless steel drain cable is pre-assembled to faucet body. Metal Speed Connect® drain body with 1-1/4" (32mm) tail piece. 1.5 gpm/5.7L/min. maximum flow rate.

MODEL NUMBER:

7038.201 Tropic 2 Handle Centerset

Metal Speed Connect® pop-up drain. Metal Lever handles.

102mm

(4)

244mm

(9-5/8)

101mm

(4)

122mm

(4-3/4)

64mm

(2-1/2)

32mm OD

(1-1/4 OD)

189mm

(7-1/2)

133mm

(5-1/4)

25mm

(1)

165mm

(6-1/2)

SUGGESTED SPECIFICATION:

4" centerset lavatory faucet shall feature a cast brass spout and waterway with 1/2" male inlet shanks. Shall feature 1/4 turn washerless ceramic disc valve cartridges. Shall also feature a metal drain body with stainless steel cable actuation. Fitting shall be American Standard Model # 7038.201.___.

FOR GROUND JOINT OR 1/2" O.D. SLIP CONNECTION

PRODUCT FEATURES:

Cast Brass Spout and Waterway: Durable. Ideal for

prolonged contact with water.

Ceramic Disc Valve Cartridges: Assure a lifetime of

smooth handle operation and drip-free performance.

Low Lead: Meets NSF Standard 61/Section 9 & Prop 65 lead

requirements.

Exclusive Speed Connect Metal Drain:

• Fewer Parts - installs in less time.

• No adjustments required - seals the first time, every time.

• Flexible stainless steel cable - installs effortlessly in tight spaces.

Simple Installation: Fast and easy one person installation.

Faucet drops in from top. Quick spin nuts secure faucet in place.

TROPIC

TWO-HANDLE CENTERSET LAVATORY FAUCET

C81

TROPIC

CODES AND STANDARDS

These products meet or exceed the following codes and standards:

ANSI A117.1 ASME A112.18.1 CSA B 125 NSF 61/Section 9

Product Number

Description

7028.201

Tropic 2 Handle Centerset with Metal Speed Connect® Pop-up drain. Metal Lever handles.

Meets the American Disabilities Act Guidelines and ANSI A117.1 Requirements for the physically challenged.

Finish Options

Polished

Chrome

002

295

PVD Satin Nickel

FLOW RATE*

GALLONS PER MINUTE

I N L E T P R E S S UR E ( P S I)

*Flow rates shown are for mixed hot and cold.

0.0

0.5

1.0

1.5

2.0

10080604020

TWO-HANDLE CENTERSET LAVATORY FAUCET

C82