American Standard 7010.211, 7010.19, 7010.23, 7010.21 User Manual
Installation
Instructions
GREEN TEA ACCESSORIES
TOWEL RING
ROBE HOOK
DOUBLE ROBE HOOK
TISSUE HOLDER
Thank you for selecting American-Standard...the benchmark
of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--please
read instructions carefully before you begin.
7010.190
7010.210
7010.211
7010.230
Certified to comply with ANSI A112.18.1
M968630 Rev. 1.1
Recommended Tools
10'
Tape Measure
Regular Screwdriver
Drill
Phillips Screwdriver
CARE INSTRUCTIONS:
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR
WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: CLEAN THE PRODUCT WITH SOAPS, ACID,
POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH
WITH A COARSE SURFACE.
TOWEL RING, ROBE HOOK and TISSUE HOLDER
1
MOUNTING BRACKET INSTALLATION
The TOWEL RING, ROBE HOOK and TISSUE HOLDER work best if secured to a wall stud or cross brace within the wall, using 1-1/2"
long SCREWS (3) not supplioed.
If the TOWEL RING, ROBE HOOK and TISSUE HOLDER are to be installed on a tile or plaster wall the ANCHORS (4) and SCREWS (2)
should be used.
Determine desired height and location (optional) for the accessory and mark a center line. If MOUNTING BRACKET (1) is secured to a
stud or cross brace drill small pilot holes for SCREWS (3). (NOTE PROPER POSITION OF MOUNTING BRACKET FOR ACCESSORY
TO BE INSTALLED.}
For installations on drywall or tiled walls, use ANCHORS (4) and SCREWS (2) for securing MOUNTING BRACKETS (1) to wall. Use MOUNTING
BRACKET (1) as a template and mark the mounting holes. Drill three 1/8" diameter holes a minimum of 1-1/4" deep. Insert the three
ANCHORS (4) flush with face of the finished wall.
Secure MOUNTING PLATES (1) to wall with SCREWS (2).
POSITION OF
MOUNTING BRACKET
FOR TOWEL RING
AND ROBE HOOK
LEVEL
1-1/2"
2
3
POSITION OF MOUNTING
BRACKET FOR DOUBLE ROBE
HOOK AND TISSUE HOLDER
1
4
CENTER
LINE
DRILL 3 PILOT HOLES FOR
WOOD SCREWS (2) OR
1/8" DIA. HOLES FOR
ANCHORS (4)
TOWEL RING INSTALLATION
2
Align accessory (A, B) and place ESCUTCHEON (1) onto MOUNTING BRACKET (2).
Secure accesory with SET SCREW (3) using 2.5mm HEX WRENCH (4) supplied.
(NOTE POSITION OF MOUNTING BRACKET.}
1
A
B
3
4
ROBE HOOK AND TISSUE HOLDER INSTALLATION
3
2
POSITION OF
MOUNTING BRACKET
FOR TOWEL RING
AND ROBE HOOK
2
Align accessory (C, D) and place ESCUTCHEON (1) onto MOUNTING BRACKET (2).
Secure accesory with SET SCREW (3) using 2.5mm HEX WRENCH (4) supplied.
(NOTE POSITION OF MOUNTING BRACKET.}
2
1
C
D
3
4
2
POSITION OF MOUNTING
BRACKET FOR DOUBLE ROBE
HOOK AND TISSUE HOLDER
M968630 Rev. 1.1
Loading...