American Standard 6831.000, 6830.000, 6832.000 User Manual
HERITAGE
GENERAL DESCRIPTION:
Cast brass valve bodies with rigid copper 8" (203mm)
connections. Amarilis 1/4 turn washerless ceramic disc
valve cartridges. Fixed brass spout. One-half inch male
inlet shanks with brass coupling nuts and shank nuts. All
brass drain body (on applicable models) with 1-1/4" (32mm)
tailpiece. 1.5gpm/5.7L/min. maximum flow rate.
PRODUCT FEATURES:
Pressure Compensating Aerator: Provides a constant
water flow of 1.5 gpm throughout the pressure range.
Brass Construction: Durable - Excellent in high use
applications. Ideal for prolonged contact with water.
Ceramic Disc Valve Cartridges: Assures a lifetime of
drip-free performance.
Low Lead: Meets NSF Standard 61/Section 9 & Prop 65
lead requirements.
6831.000 Shown
MODEL NUMBER:
6830.000 8" Widespread Lavatory
Rigid gooseneck spout. 1.5 gpm pressure
compensating aerator. Less drain. Less handles.
Rigid copper connection.
6831.000 8" Widespread Lavatory
Rigid gooseneck spout. 1.5 gpm pressure
compensating aerator. Pop-up drain. Less handles.
Rigid copper connection.
6832.000 8" Widespread Lavatory
Rigid gooseneck spout. 1.5 gpm pressure
compensating aerator. Grid strainer drain.
Less handles. Rigid copper connection.
Handles must be ordered separately.
SUGGESTED SPECIFICATION:
Two handle widespread lavatory faucet shall feature cast brass valve bodies with 8" rigid copper connections. All brass
shank nuts and coupling nuts. Shall feature water-conserving 1.5 gpm/5.7L/min. pressure compensating aerator. Shall also
feature 1/4 turn washerless ceramic disc valve cartridges. Fitting shall be American Standard Model #680_.000.___ and
handle kit # 0000.___.___.
127mm
(5)
270mm
(10-5/8)
51mm
(2) DIA.
TYP.
203mm
(8)
29mm
(1-1/8)
DIA.
35mm
(1-3/8) DIA.
MTG. HOLES
89mm
(3-1/2)
165mm
(6-1/2)
38mm
(1-1/2)
MAX.
FOR GROUND JOINT
OR 1/2" O.D. SLIP
CONNECTION
RIGID COPPER
CONNECTION
TWO-HANDLE 8" WIDESPREAD LAVATORY FAUCET
WITH GOOSENECK SPOUT
© 2008 AS A meric a Inc.
L29
HERITAGE
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ASME A112.18.1
CSA B 125
NSF 61/Section 9
6831.000
Product
Number
Description
Lavatory Faucet. 1.5 gpm/5.7L/min pressure compensating
aerator. Pop-up drain. Less handles.
Finish
6832.000
Lavatory Faucet. 1.5 gpm/5.7L/min pressure compensating aerator.
Grid strainer drain. Less handles.
6830.000
Lavatory Faucet. 1.5 gpm/5.7L/min pressure compensating aerator.
Less drain. Less handles.
Polished
Chrome
002
Handles must be ordered separately.
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
Wrist
Blade
Lever
372H
372V
342H
342V
The above fittings will accept the following Amarilis-Series handles.
FLOW RATE*
GALLONS PER MINUTE
I N L E T P R ES SU R E (P S I )
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
10080604020
Other Aerators Available:
Part Suffix
V15
L15
LV15
V05
Description
1.5 gpm Pressure Compensating Vandal-Resistant Aerator
1.5 gpm Pressure Compensating Laminar Flow
1.5 gpm Pressure Compensating Vandal-Resistant Laminar Flow Outlet
0.5 gpm Pressure Compensating Vandal-Resistant Spray
TWO-HANDLE 8" WIDESPREAD LAVATORY FAUCET
WITH GOOSENECK SPOUT
© 2008 AS A meric a Inc.
L30
Loading...