American Standard 6721, 6723, 6729 User Manual

Installation

STANDARD COLLECTION

ROBE HOOK TOWEL RING

Instructions

6721 6729 6723

TISSUE PAPER HOLDER

Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years.

To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin.

Recommended Tools

Certified to comply with ANSI A112.18.1 U.S. Patent No. D403,750

CARE INSTRUCTIONS:

10'

Tape Measure

ROBE HOOK, TOWEL RING and TISSUE PAPER HOLDER

Drill

Regular Screwdriver

Phillips Screwdriver

DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.

DO NOT: CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH WITH A COARSE SURFACE.

MOUNTING & INSTALLATION

The ROBE HOOK (1), TOWEL RING (2) and TISSUE PAPER HOLDER (3) work best if secured to a wall stud or cross brace within the wall, using the SCREWS (3) supplied.

M968216C

If the ROBE HOOK (1), TOWEL RING (2) and TISSUE PAPER HOLDER (3) is to be installed on a tile or plaster wall the TILE ANCHORS (4) or DRYWALL ANCHORS (6) and SCREWS (3) should be used.

Determine desired height and location (optional) and mark a center line. Using the MOUNTING PLATE (5) as a template mark the two mounting holes. If MOUNTING PLATE (5) is secured to a stud or cross brace drill small pilot holes for SCREWS (3).

For installations on drywall,

screwdriver or cordless screwdriver into recess of anchor. Press into drywall while turning the anchor clockwise until it is seated flush with the wall. Place MOUNTING PLATE (5) over DRYWALL ANCHORS (6) and insert SCREWS (3) with #2 Phillips screwdriver. See illustration below. Secure MOUNTING PLATE (5) to wall with SCREWS (3).

For installations on tiled walls,

two 1/4" diameter holes a minimum of 1-1/4" deep. Insert the two TILE ANCHORS (4) flush with face of the finished wall. Secure MOUNTING PLATE (5) to wall with SCREWS (3).

Install the WALL ESCUTCHEON (7) on the MOUNTING PLATE (5). Place the ROBE HOOK (1), TOWEL RING (2) and TISSUE PAPER HOLDER (3) over the ESCUTCHEON (7). Secure with MOUNTING SCREW (8). Tighten fully.

Push INDEX BUTTON (9) into ROBE HOOK (1), TOWEL RING (2) and TISSUE PAPER HOLDER (3). See illustration.

use DRYWALL ANCHORS (6) and SCREWS (3) for securing MOUNTING PLATE (5) to wall. Place #2 Phillips

If TILE ANCHORS (4) and SCREWS (3) are used for securing MOUNTING PLATE (5), then drill

USE MOUNTING PLATE AS TEMPLATE

CENTER LINE

30 TO 72

INCHES FROM

FLOOR

FINISHED WALL

6721 ROBE HOOK

M962233-0070A

INDEX BUTTON

M962135-YYY0A

ROBE HOOK KIT

STANDARD

COLLECTION

ACCESSORIES

ROBE HOOK

TOWEL RING

TISSUE PAPER HOLDER

MODEL NUMBERS

6721 6729 6723

M962136-0070A

MOUNTING BRACKET

M907736-YYY0A

ESCUTCHEON

M907736-YYY0A

ESCUTCHEON

6729 TOWEL RING

M962233-0070A

INDEX BUTTON

6723 TISSUE PAPER HOLDER

M962138-YYY0A

TISSUE PAPER HOLDER KIT

M962136-0070A

MOUNTING BRACKET

M962137-YYY0A

TOWEL RING KIT

M907736-YYY0A

ESCUTCHEON

M962136-0070A

MOUNTING BRACKET

M962233-0070A

INDEX BUTTON

Replace the "YYY" with appropriate finish code

CHROME SATIN

002 295

For toll-free information and answers to your questions, call:

IN CANADA 1-800-387-0369 (TORONTO 1-905-306-1093)

HOT LINE FOR HELP

1-800 442-1902

Weekdays 8:00 a.m. to 8:00 p.m. EST

Weekdays 8:00 a.m. to 7:00 p.m. EST

M968216C