GENERAL DESCRIPTION:
Durable cast brass construction throughout. Cast brass
valve bodies with 8" rigid copper connection with
compression fittings. 1/2" male threaded inlet shanks with
brass coupling nuts. 1/4 turn ceramic disc valve cartridges.
Choice of Vandal-Resistant Wrist Blade or Lever handles
with blue & red color indexes. All brass drain bodies with
1-1/4" (32mm) tailpieces (on applicable models). 1.5
gpm/5.7L/min. maximum flow rate. Vandal-Resistant and
Laminar Flow aerators are available.
PRODUCT FEATURES:
Pressure Compensating Aerator: Provides a constant
water flow of 1.5 gpm throughout the pressure range
Solid Brass Construction: Durable - Excellent in high
use applications. Ideal for prolonged contact with water.
Ceramic Disc Valve Cartridges: Assures a lifetime of
drip-free performance.
Low Lead: Meets NSF Standard 61/Section 9 & Prop 65
lead requirements.
6501.170 Shown
MODEL NUMBER:
6500.170 Widespread Lavatory
1.5 gpm Pressure Compensating Aerator.
Vandal-Resistant Wrist Blade handles.
Less drain and pop-up hole.
6501.170 Widespread Lavatory
1.5 gpm Pressure Compensating Aerator.
Vandal-Resistant Wrist Blade handles. Pop-up drain.
6502.170 Widespread Lavatory
1.5 gpm Pressure Compensating Aerator.
Vandal-Resistant Wrist Blade handles. Grid strainer drain.
6500.140 Widespread Lavatory
1.5 gpm Pressure Compensating Aerator.
Vandal-Resistant Lever handles.
Less drain and pop-up hole.
6501.140 Widespread Lavatory
1.5 gpm Pressure Compensating Aerator.
Vandal-Resistant Lever handles. Pop-up drain.
6502.140 Widespread Lavatory
1.5 gpm Pressure Compensating Aerator.
Vandal-Resistant Lever handles. Grid strainer drain.
SUGGESTED SPECIFICATION:
Two handle widespread lavatory faucet shall feature cast brass valve bodies with 8" rigid copper connection. Shall feature
water-conserving 1.5 gpm/5.7L/min. pressure compensating aerator. Vandal-Resistant handles. Shall also feature 1/4 turn
washerless ceramic disc valve cartridges. Fitting shall be American Standard Model # 650_.___.002.
35mm
(1-3/8) DIA.
MOUNTING
HOLES
57mm
(2-1/4)
83mm
(3-1/4)
89mm
(3-1/2)
51mm
(2) DIA.
TYP.
53mm
(2-3/32)
38mm
(1-1/2)
MAX.
203mm
(8)
381mm
(15-3/4)
57mm
(2-1/4)
56mm
(2-7/32)
98mm
(3-7/8)
104mm
(4-1/16)
1/2 NPSM
Lever Handle
© 2008 AS A meric a Inc.