American Standard 6059.193 User Manual
Installation Instructions
SELECTRONIC®
Hard-Wired AC Powered ICU
Lavatory Proximity Faucet
PRODUCT NUMBER
6059.193
Product No.'s & Options
Specifications
How to Install
Electrical Hook-up
6059.193 ICU Faucet shown Installed on
American Standard 9118.111 ICU Sink
Certified to comply with ASME A112.18.1M
© 2012 American Standard
Installation Instructions
NOTE TO INSTALLER: Please give this manual to the customer after installation.
M965271
Maintenance
FAQ,s
Replacement Parts
1
2
2-3
4-5
6-7
8
9
To l ea rn m or e ab ou t A me ri ca n St an da rd Fa u ce ts v is it o ur w eb si te at : www.us.amstd.com or U.S.
customer's e-mail us at: faucetsupport@amstd.com
For Parts, Service, Warranty or other Assistance,
please call
1-800-442-1902 (In Canada: 1-800-387-0369)
(In Toronto Area only: 1-905-3061093)
(In Toronto Area only: 1-905-3061093)
Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years. To ensure
Inst a l l a t i on I n s t r u c t i ons
that your installation proceeds smoothly--please read these instructions carefully before you begin.
UNPACKING
All American Standard Faucets Are Water Tested At Our Factory.
Some Residual Water May Remain In The Faucet During Shipping.
1. R em ov e t he fi t t i ng a nd l o o s e i te m s f r om t h e c ar t o n . T h e il l u s t r at i o n b e lo w s h ow s t h e fi t t i ng a n d a ll l o o s e i t e m s
after they have been removed from the carton. Some items may be packaged partially assembled to other items.
1. Selectronic Spout Assembly
2. Mounting Kit
3. Electrical Enclosure
4. Supply Hose
5. 10 ft. Extension Wire
7. Circuit board
8. 4" Deck plate ( optional must be ordered separately)
9. 8" Deck plate ( optional must be ordered separately)
10. Mixing Valve ( optional must be ordered separately)
11. Installation Instructions
6. Power Supply
5" GN Spout
PRODUCT No.s
6059.193
SELECTRONIC®
Hard-Wired AC Powered ICU
11
1
DO NOT REMOVE PROTECTIVE
FILM FROM SENSOR EYE UNTIL
INSTALLATION IS COMPLETE.
6
Lavatory Proximity Faucet
PRODUCT NUMBER
6059.193
6059.193 ICU Faucet shown Installed on
American Standard 9118.111 ICU Sink
Certified to comply with ASME A112.18.1M
© 2012 American Standard
M965271
Installation Instructions
Product No.'s & Options
Specifications
How to Install
Electrical Hook-up
Maintenance
FAQ,s
Replacement Parts
1
2
2-3
4-5
6-7
8
9
605P400
Deck Plate Mixing ValveBase Product
605P800
605XTMV
NOTE TO INSTALLER: Please give this manual to the customer after installation.
To le a r n m o re ab o u t Am e r ic a n S t an d a rd Fa uc e t s v i si t o u r w e bs i te a t: www.us.amstd.com or U.S.
customer's e-mail us at: faucetsupport@amstd.com
2
7
3
5
For Parts, Service, Warranty or other Assistance,
please call
1-800-442-1902 (In Canada: 1-800-387-0369)
(In Toronto Area only: 1-905-3061093)
(In Toronto Area only: 1-905-3061093)
4
9
9
10
1
M965271
FINISHED
32mm
(1-1/4) DIA.
WALL
(127mm)
5"
(53mm)
2-1/8" DIA.
(133mm)
5-1/4"
60mm
(2-3/8) MAX.
(243mm)
9-9/16"
MOUNTING
SURFACE
Roughing-in Dimensions
GENERAL DESCRIPTION:
Electronic faucet with proximity operation. Vandal
resistant solid brass construction single post
mounting. Operates on AC permanent power.
In-line strainer for solenoid is integral. Single inlet
3/8 compression, built-in checks, and flexible
stainless steel 16-1/4" reach inlet hose for spout
connection.
Note: All plumbing and electrical wiring must
be installed in accordance with applicable
codes, regulations and standards.
413mm
(16-1/4)
ELECTRICAL BOX OR
EQUIVALENT BY OTHERS
81mm
(3-3/16)
3/8" COMP.
RECOMMENDED TOOLS
1 Channel Locks
2 Adjustable Wrench
3 Plumbers' Putty or Caulking
4 Phillips Screwdriver
5 Flat Blade Screwdriver
6 Electric Drill & 1/4" Drill Bit
7 Tape Measure
INSTALLATION
114mm
(4-1/2)
500mm
(20")
125mm
(4-7/8)
3
Fig. 1
1
2
7
4
10'
6
5
INSTALL SPOUT ASSEMBLY;
1
Fig. 1
CAUTION
1. Insert WIRES (1), FLEX HOSE (2) and SPOUT
SHANK (3) through center hole of mounting surface.
Fig. 1.
2. Assemble "C" WASHER (4), STAR WASHER (5)
and LOCKNUT (6) onto threads of SPOUT SHANK (3)
from underside of mounting surface. Fig. 1a.
3. Align FAUCET and tighten LOCKNUT (6). Fig. 1a.
Note: 4" and 8" Deck Plates are available for other
installations, see page one for information.
Turn off hot and cold water
supplies before beginning
Fig. 1a
2
2
3
1
3
6
5
4
M965271
Loading...