American Standard 6047.861.002, 6047.821.002 Installation Manual
Installation Instructions
MANUAL FLUSH VALVE
with BEDPAN WASHER
For Use with 1-1/2" Top Spud Toilets
MODEL NUMBERS
6047.8XX
6047.8006047.860 (1.6gpf)
6047.815
6047.820 (1.28gpf)
Certified to comply with:
• ASSE 1037
• CSA B125.3
• ADA Compliant
© 2013 AS America, Inc.
Installation Instructions
M965403 REV. 1.4
6047.821 (1.28gpf)
6047.861 (1.6gpf)
NOTE TO INSTALLER: Please give this manual to the customer after installation.
To l ea rn m or e ab ou t A me ri ca n St an da rd Fa u ce ts v is it o ur we bs it e at : www.americanstandard.com
or U.S. customer's e-mail us at: faucetsupport@americanstandard.com
For Parts, Service, Warranty or other Assistance,
please call
1-800-442-1902 (In Canada: 1-800-387-0369)
(In Toronto Area only: 1-905-3061093)
(In Toronto Area only: 1-905-3061093)
Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years. To ensure that your
In s ta l la t io n I n st r u ct i on s
installation proceeds smoothly--please read these instructions carefully before you begin.
UNPACKING
All American Standard Products Are Water Tested At Our Factory.
Some Residual Water May Remain In The Valve During Shipping.
1. Remove the Bedpan Washer items from the carton. The illustration below shows all items
after they have been removed from the carton. Some items may be packaged partially
assembled to other items.
1. Flush Valve Assembly
(6047.820/.821) (6047.860/.861)
2. Down Tube and Vacuum Breaker
3. Diverter assembly
4. Straight Tailpiece
CARE INSTRUCTIONS:
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A
CLOTH WITH A COARSE SURFACE.
5. Spud Coupling Nut and Washers
6. Spud Flange
7. Wall Support
8. Installation Instructions
9. 1-1/2" Offset Tailpiece (6047.861/.821/.815)
1
MANUAL FLUSH VALVE
with BEDPAN WASHER
For Use with 1-1/2" Top Spud Toilets
6047.820 (1.28gpf)
Certified to comply with:
• ASSE 1037
• CSA B125.3
• ADA Compliant
© 2013 AS America, Inc.
Installation Instructions
M965403 REV. 1.4
NOTE TO INSTALLER: Please give this manual to the customer after installation.
To le a r n m o re ab o u t Am e r ic a n S t an d a rd Fa uc e t s v is i t o u r w e bs i te a t: www.americanstandard.com
or U.S. customer's e-mail us at: faucetsupport@americanstandard.com
For Parts, Service, Warranty or other Assistance,
please call
1-800-442-1902 (In Canada: 1-800-387-0369)
6047.821 (1.28gpf)
6047.861 (1.6gpf)
(In Toronto Area only: 1-905-3061093)
(In Toronto Area only: 1-905-3061093)
MODEL NUMBERS
6047.8XX
6047.8006047.860 (1.6gpf)
6047.815
2
3
7
8
49
1
5
6
1
M965403 REV. 1.4
Fig. 1
Roughing-in Dimensions
GENERAL DESCRIPTION:
FLUSH VALVE with BEDPAN WASHER
For Use with Exposed Flushometer
and 1-1/2" Top Spud Toilets
FINISHED WALL
ADJUSTABLE
38mm (1-1/2")
OFF-SET
TAI LP IEC E
245mm
(9-5/8")
MAX.
FINISHED WALL
ADJUSTABLE
207mm
(8-1/8")
MAX.
(12-11/16")
90˚
322mm
FOR 1-1/2" TOP
SPUD FIXTURES
108mm -133 mm
(4-1/4" to 5-1/4")
708mm
(27-7/8")
SUPPLY
DN 25mm
(1" I.P.S.)
358mm
(14-1/16")
619mm
(24-3/8")
222mm
(8-3/4")
RECOMMENDED TOOLS; Fig. 2
1.
Flat Blade Screwdriver
2.
Smooth Jaw Adjustable Wrench
3.
Tape Measure
4.
Tubing Cutter
5.
File
PRIOR TO INSTALLATION
IMPORTANT:
• All plumbing must be installed in accordance with
applicable codes and regulations.
• Water supply lines must be sized to provide an
adequate volume of water for each fixture.
• Water pressure over 80 psi is not recommended
with most plumbing fixtures
Fig. 2
1
4
5
2
10'
3
• Flush all water lines prior to operation.
• DO NOT use pipe sealant or plumbing grease on any coupling!
• Protect the chrome or special finish on the Bedpan Washer.
DO NOT USE toothed tools on finished surfaces to install or
service these valves. Also see “Care and Cleaning” section of
this manual.
2
M965403 REV. 1.4
Loading...