American Standard 6045.101.002, 6045.510.002 User Manual
MANUAL URINAL
FLUSH VALVE
1.0 GPF
MODEL NUMBER:
❑ 6045.101.0 0 2 Flush Valve for 3/4" top spud
urinals, 1.0 gpf
❑ 6045.510.002 Retrot for existing ush valves,
1.0 gpf. Replaces industry standard manual &
electronic ush valves. Does not include vacuum
breaker assembly, angle stop & sweat solder kit.
OPERATING PRESSURE:
Overall Range: 20-125 psi**
Recommended: 20 psi (owing)-80 psi (static)
** Water pressure over 80 psi is not recommended
for most plumbing xtures.
GENERAL DESCRIPTION:
Manual Piston-Type Urinal Flush Valve for
3/4" top spud urinals.
INCLUDES:
• 3/4" I.P.S. angle stop with back-ow prevention and
vandal-resistant cap
• Sweat solder kit including cover tube and wall ange
• High back pressure vacuum breaker with down tube
• Spud coupling & ange for 3/4” top spud
PRODUCT FEATURES:
• Self-cleaning brass piston with integral wiper spring
prevents clogging and reduces maintenance
• Piston operation delivers superior ush accuracy
and repeatability
• Piston valve remains closed and does not need
to be reset after loss of water pressure
• Non-hold open handle
• Positive seal ensures leak-free performance
• No external volume adjustment
• Durable chrome-plated cast brass construction
is ideal for commercial applications
• Chloramine-resistant EPDM seals
• Adjustable tailpiece for rough-in exibility
• Can be installed left or right handed
• ADA complaint
FLOW REQUIREMENT:
10gpm (37.9 L/min.)
ACCESSORIES:
• Cast wall anges (3/4")
TYPICAL URINAL INSTALLATION:
WASHBROOK URINAL SHOWN
FINISHED WALL
38-127mm
(1-1/2"-5")
343mm
(13-1/2")
295mm
(11-1/2")
-C-L-
CRITICAL
LEVEL
SEE ROUGH-IN
ON BACK
SUPPLY
DN 20mm
(3/4" I.P.S.)
*CRITICAL
LEVEL
108mm-133mm
(4-1/4" to 5-1/4")
-C-L-
FOR 3/4"
TOP SPUD
FIXTURES
6045.101
ROUGH-IN
DIMENSION
295mm (11-1/2")
FINISHED FLOOR
RECOMMENDED SPECIFICATION:
Manual urinal flush valve shall feature self-cleaning brass piston valve with integral wiper spring in bypass orifice to prevent clogging. Valve
remains closed and does not need to be reset after loss of water pressure. Includes cast brass valve body and cover with chrome finish and
vandal resistant stop cap. Includes sweat solder kit with wall flange and cover tube. Angle stop with back-flow protection and vacuum breaker included.
1.0 gpf / 3.8 Lpf Flush valve shall be American Standard Model # 604 5.101.002.
© 2012 AS America Inc.
L215
Revised
LISTINGS:
• ASSE 1037
• ANSI/ASME A112.19.2
• ADA Compliant
Roughing-in Dimensions
MANUAL URINAL
FLUSH VALVE
1.0 GPF
FINISHED WALL
38mm-127mm
(1-1/2"-5")
SUPPLY
DN 20mm
(3/4" I.P.S.)
*Note: The Critical Line (-C-L-) on Vacuum Breaker
must typically be a minimum of 6
fixture. Consult Codes for details.
108mm-133mm
(4-1/4" to 5-1/4")
-C-L-
*CRITICAL
LEVEL
" (152mm) above
6045.101
ROUGH-IN
DIMENSION
295mm
(11-1/2")
FOR 3/4" TOP
SPUD FIXTURES
-C-L-
6045.101
343mm
(13-1/2")
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND
USABLE BUILDING FACILITIES-CHECK LOCAL CODES
© 2012 AS America Inc.
Left or Right Hand Installation
L216
Revised
Loading...