American Standard 6012 User Manual
wan
S
PRESSURE BALANCE
TUB and SHOWER SET
MODEL NUMBER:
6012 Pressure Balance Tub and Shower Set
E.Z. clean showerhead. I.P.S. diverter tub spout.
FINISHED WALL
1/2" NPT
6012 Shown.
GENERAL DESCRIPTION:
Cast brass valve body. Washerless 47mm ceramic disc
valve cartridge cycles from "Off" to "Cold" to "Hot". Hot
limit safety stop. Pressure balancing cartridge maintains
constant output temperature in response to changes in
relative hot and cold supply pressures. 1/2" female I.P.S.
inlets/outlets. E.Z. clean showerhead has
2.5gpm/9.5L/min. flow restrictor. Metal lever handle.
Rough-in plaster guard designed for use as thin-wall
mounting adaptor. I.P.S. diverter tub spout.
PRODUCT FEATURES:
Solid Brass Construction: Durable, ideal material for
prolonged contact with water.
Ceramic Disc Valve Cartridge: Assures a lifetime of
smooth handle operation and drip-free performance.
Pressure Balancing Valve: Maintains output
temperature in response to changes in relative hot and
cold supply pressure. Diaphragm system engineered to
eliminate cross flow and spool "thumping". Avoids failure
due to mineral deposits - ideal for use with hard water.
Adjustable Hot Limit Safety Stop: Limits the
amount of hot water allowed to mix with cold. Reduces
the risk of accidental scalding.
Integral Plaster Guard and Mounting Plate:
Plaster guard designed to protect valve during installation
and to serve as a mounting plate for thin wall installations.
Choice of Finishes: Lifetime finishes won't tarnish or
scratch.
Lifetime Warranty on Function and Finish.
4" REF.
74" FOR HEAD
CLEARANCE
18" OPTIONAL
TOP OF TUB RIM
OUTLETS
1/2" NPT
1-5/8"
3-1/4"
5-1/2" REF.
7-1/8"
3-3/4"
MIN.
5" REF.
BOTTOM OF TUB
INLETS 1/2" NPT
3-3/8"
3-3/8"
1/2" NPT
THREADED INLETS
OPTIONAL TO FINISHED
to
FLOOR USUALLY
BETWEEN 65'' AND 80''
4"
SUGGESTED SPECIFICATION:
Bath/shower fitting shall be cast brass construction. E.Z. clean showerhead and I.P.S. diverter tub spout. Fitting shall be
equipped with pressure balancing cartridge engineered to eliminate cross flow and avoid failure due to mineral deposits.
Fitting shall be equipped with a pressure balancing mechanism and hot limit safety stop. Fitting shall be American Standard
Model # 6012_.
wan
S
PRESSURE BALANCE
TUB and SHOWER SET
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
CSA B 125
ASSE 1016
Product
Number
6012
Description
Pressure Balance Bath/Shower . Female I.P.S inlets/outlets. E.Z. clean showerhead.
I.P.S. diverter tub spout.
Polished Chrome finish.
FLOW RATE*
8
6
4
2
GALLONS PER MINUTE
0
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
Spout
Shower
10080604020
6012S
Pressure Balance Bath/Shower . Female I.P.S inlets/outlets. E.Z. clean showerhead.
I.P.S. diverter tub spout.
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
Satin (PVD) finish.
Loading...