American Standard 5910, 5905, 5901 User Manual

Installation Instructions

™

© 2007 American Standard Inc.

3

2

1 2

1

Hinge

Hinge Post

Metal Nut

Soft Rubber Washer

Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years. To ensure
that your installation proceeds smoothly — please read these instructions carefully before you begin.

1. Insert the hinge posts into the bowl bolt
holes making sure that the soft rubber
washer is beneath the hinge and on top
of the toilet bowl.

3. Tighten the nut on the hinge post using a
wrench. Caution: Do not over-tighten the
bolts as it could crack the toilet bowl.

2. Properly align the toilet seat and install the
metal washer, metal lock washer and metal
nut onto the hinge post.

Metal Washer

Toilet Bowl

Metal Lock Washer

Side View of the toilet seat installation parts.

5901

5905

5910

COMMERCIAL TOILET SEATS

MODELS: 5901 Elongated Heavy Duty
5905 Elongated Extra Heavy Duty
5910 Elongated Extra Heavy Duty Plus

7 6 0 11 9 - 1 00 7 6 0 11 9 - 1 00

AMERICAN STANDARD ONE-YEAR LIMITED WARRANTY

If inspection of this American Standard plumbing product, within one year after its initial installation, confirms that it
is defective in materials or workmanship, American Standard will repair or, at its option, exchange the product for a
similar model.

This limited warranty does not apply to local building code compliance; since local building codes vary
considerably, the purchaser of this product should check with a local building or plumbing contractor to ensure
local code compliance before installation.

This warranty shall be void if the product has been moved from its initial place of installation; if it has been
subjected to faulty maintenance, abuse, misuse, accident, or other damage; if it was not installed in accordance
with American Standard's instructions, or if it has been modified in a manner inconsistent with the product as
shipped by American Standard.

American Standard's option to repair or exchange the product under this warranty does not cover any labor or
other costs of removal or installation, nor shall American Standard be responsible for any other incidental or
consequential damages attributable to a product defect or to the repair or exchange of a defective product, all of
which are expressly excluded from this warranty. (Some states or provinces do not allow the exclusion or
limitation of implied warranties, so this exclusion may not apply to you.)

This warranty gives you specific legal rights. You may have other statutory rights that vary from state to state or
from province to province, in which case this warranty does not affect such statutory rights.

For service under this warranty, it is suggested that a claim be made through the contractor or dealer from or
through whom the product was purchased, or that a service request (including a description of the product model
and of the defect) be sent to the following address:

FOR AFTER-SALES SERVICE CALL 1 [phone] WEEKDAYS.

Care and Cleaning

When cleaning your toilet seat wash it with a mild, soapy water: rinse the seat thoroughly with clear
water and dry with a soft cloth.

Avoid detergents, disinfectants, or cleaning products in aerosol cans. Never use abrasive scouring
powders on your seat. Some bathroom chemicals and cosmetics may damage the seat’s finish.
After installation, check the tightness of the bolts from time to time to ensure a tight fit.

In the United States:

American Standard Inc.,

P.O. Box 6820

Piscataway, New Jersey 08855

Attention: Director of Consumer Affairs

For residents of the United States, warranty
information may also be obtained by calling

the following toll free number: [phone]

www.americanstandard-us.com

In Canada:

American-Standard,
2480 Stanfield Rd.,

Mississauga, Ontario

Canada L4Y 1S2

Toll Free: [phone]

www.americanstandard.ca

In Mexico:

Customer Service Manager
Ideal Standard, S.A. de C.V.

Via Morelos #330

Col. Santa Clara

Ecatepec 55540 Edo. Mexico

www.americanstandard.com.mx