American Standard 555.652 User Manual

TOWN SQUARE

2555.602 2555.652

MODEL NUMBER:

2555.602 Pressure Balance Bath/Shower

Built-in diverter. “Rain” showerhead. Brass tub spout. For wall mount installation.

2555.652 Pressure Balance Bath/Shower

Built-in diverter. “Rain” showerhead. Brass tub spout. For deck mount installation.

PRODUCT FEATURES:

Solid Brass Construction: Durable, ideal material for

prolonged contact with water.

Ceramic Disc Valve Cartridge: Assures a lifetime of

drip-free performance.

Pressure Balancing Valve: Maintains output

temperature in response to changes in relative hot and cold supply pressure. Diaphragm system engineered to eliminate cross flow and spool “thumping”. Avoids failure due to mineral deposits - ideal for use with hard water.

Built-in Diverter: Easy to use, integrated in valve body

and includes positive shut-off. Allows spout and showerhead in any desired installation location.

Adjustable Hot Limit Safety Stop: Limits the

amount of hot water allowed to mix with cold. Reduces the risk of accidental scalding.

Integral Plaster Guard and Mounting Plate:

Plaster guard designed to protect valve during installation and to serve as a mounting plate for thin wall installations.

GENERAL DESCRIPTION:

Cast brass valve body. Washerless 47mm ceramic disc

valve cartridge cycles from “Off” to “Cold” to “Hot”. Hot limit safety stop. Pressure balancing cartridge maintains constant output temperature in response to changes in relative hot and cold supply pressures. threaded 1/2" NPT inlets/outlets with screwdriver stops. 4-1/2" easy clean "Rain" showerhead has 2.5gpm/9.5L/min. flow restrictor. Cast brass shower arm. Integral diverter. Durable brass wall escutcheon. Metal lever handle. Rough-in plaster guard designed for use as thin-wall mounting adaptor. Brass tub spout.

SUGGESTED SPECIFICATION:

Bath/shower fitting shall be cast brass construction with all brass spout and showerhead. Shall also feature washerless ceramic disc valve cartridge which allows user to control water temperature. Fitting shall be equipped with a pressure balancing

PRESSURE BALANCE BATH/SHOWER

41mm to 83mm

(1-5/8" to 3-1/4")

FINISHED WALL

BOTTOM OF TUB

1880mm (74") FOR

HEAD CLEARANCE

51mm

(2") REF.

1/2" I.P.S.

25mm

(1")

191mm (7-1/2")

OPTIONAL TO

FINISHED FLOOR

USUALLY BETWEEN

1651mm to 1981mm

(65'' AND 78'')

203mm

(8") REF.

184mm

(7-1/4") REF.

102mm

(4")

1/2" NPT

457mm

(18" )

OPTIONAL

"SEE ILLUSTRATION"

TO P OF TU B RI M

SHW

TUB

1/2" NPT

SPOUT MTG. SURFACE

1/2" NPT

25mm (1")

44mm

(1-3/4")

THREADED INLETS (STOPS)

INLETS

1/2" NPT

143mm (5-5/8")

OUTLETS 1/2" NPT

38mm

(1-1/2")

MAX.

210mm (8-1/4")

78mm

(3-11/16")

76mm (3")

BOTTOM OF

TUB

2555.602

2555.652

CODES AND STANDARDS

These products meet or exceed the following codes and standards:

ANSI A117.1 ASME A112.18.1 CSA B 125 ASSE 1016

Product Number

mechanism and hot limit safety stop. Fitting shall be American Standard Model # 2555.____.____.

PRESSURE BALANCE BATH/SHOWER FITTING

WITH BUILT- IN DIVERTER

B17

TOWN SQUARE

FLOW RATE*

GALLONS PER MINUTE

I N L E T P R E S SU R E ( PS I )

*Flow rates shown are for mixed hot and cold.

Shower

Spout

10080604020

2555.602

Pressure Balance Bath/Shower w/built-in diverter.

Brass tub spout for wall mount installation.

2555.652

Pressure Balance Bath/Shower w/built-in diverter.

Brass tub spout for deck mount installation..

CODES AND STANDARDS

These products meet or exceed the following codes and standards:

ANSI A117.1 ASME A112.18.1 CSA B 125 ASSE 1016

Product Number

Description

Meets the American Disabilities Act Guidelines and ANSI A117.1 Requirements for the physically challenged.

PVD

Blackened

Bronze

PVD Satin

Nickel

295068

Finish Options

Polished

Chrome

002

"Rain" showerhead.

PRESSURE BALANCE BATH/SHOWER FITTING

WITH BUILT- IN DIVERTER

B18