American Standard 5402.172V, 5402.172H, 5402.142H User Manual

HERITAGE

GENERAL DESCRIPTION:

Durable cast brass construction. Amarilis 1/4 turn washerless ceramic disc valve cartridges. One-half inch male inlet shanks with brass coupling nuts and shank nuts. All brass drain bodies with 1-1/4" (32mm) tailpieces. Vandal-resistant faucets feature vandal-resistant aerators, drains and index buttons on factory-installed handles. 1.5 gpm/5.7L/min. maximum flow rate.

PRODUCT FEATURES:

Pressure Compensating Aerator: Provides a constant water

flow of 1.5 gpm throughout the pressure range.

Solid Brass Construction: Durable - Excellent in high use

applications. Ideal for prolonged contact with water.

Ceramic Disc Valve Cartridges: Assures a lifetime of

drip-free performance.

Low Lead: Meets NSF Standard 61/Section 9 & Prop 65 lead

requirements.

Factory Installed Handles: Simplifies installation.

MODEL NUMBER:

5402.142H Centerset Lavatory Faucet

1.5 gpm pressure compensating aerator. Metal lever handles. Grid drain.

5402.172H Centerset Lavatory Faucet

1.5 gpm pressure compensating aerator. Brass wrist bade handles. Grid drain.

5402.172V Centerset Lavatory Faucet

1.5 gpm pressure compensating aerator. Vandal-resistant brass wrist blade handles. Vandal-resistant aerator. Grid drain.

SUGGESTED SPECIFICATION:

4" centerset lavatory faucet shall be cast brass construction with all brass shank nuts and coupling nuts. Shall feature water-conserving 1.5 gpm/5.7L/min. pressure compensating aerator. Shall also feature 1/4 turn washerless ceramic disc

valve cartridges. Fitting shall be American Standard Model # 5402.____.___ .

Shown without handles. Faucet comes complete with factory installed handles. V = Vandal-Resistant, H = Standard

56mm

(2-3/16)

76mm

(3)

90mm

(3-9/16)

137mm (5-3/8)

44mm

(1-3/4)

22mm (7/8) DIA.

FOR GROUND JOINT OR 1/2" O.D. SLIP CONNECTION

51mm

(2)

35mm

(1-3/8) MAX.

32mm (1-1/4)DIA. MOUNTING HOLES

102mm

(4)

TWO-HANDLE CENTERSET LAVATORY FAUCET

WITH CONVENTIONAL SPOUT & FACTORY INSTALLED HANDLES

L41

HERITAGE

CODES AND STANDARDS

These products meet or exceed the following codes and standards:

ASME A112.18.1 CSA B 125 NSF 61/Section 9

5402.142H

5402.172H

5402.172V

Product Number

Description

Finish

Polished Chrome

002

Centerset lavatory faucet. 1.5 gpm/5.7L/min pressure compensating aerator. Metal Lever Handles. Grid drain.

Centerset lavatory faucet. 1.5 gpm/5.7L/min pressure compensating aerator. Brass Wrist Blade Handles. Grid drain.

Centerset lavatory faucet. Vandal-Resistant 1.5 gpm/5.7L/min pressure compensating aerator.Vandal-Resistant Brass Wrist Blade Handles. Grid drain.

Meets the American Disabilities Act Guidelines and ANSI A117.1 Requirements for the physically challenged.

Other Aerators Available:

Part Suffix

V15 L15 LV15 V05

Description

1.5 gpm Pressure Compensating Vandal-Resistant Aerator

1.5 gpm Pressure Compensating Laminar Flow

1.5 gpm Pressure Compensating Vandal-Resistant Laminar Flow Outlet

0.5 gpm Pressure Compensating Vandal-Resistant Spray

FLOW RATE*

GALLONS PER MINUTE

I N L E T P R ES SU R E ( P S I )

*Flow rates shown are for mixed hot and cold.

0.0

0.5

1.0

1.5

2.0

10080604020

TWO-HANDLE CENTERSET LAVATORY FAUCET

WITH CONVENTIONAL SPOUT & FACTORY INSTALLED HANDLES

L42