American Standard 5401.000, 5400.000, 5402.000 User Manual

HERITAGE

GENERAL DESCRIPTION:

Durable cast brass construction throughout. Amarilis 1/4 turn washerless ceramic disc valve cartridges. One-half inch male inlet shanks with brass coupling nuts and shank nuts. All brass drain body with 1-1/4" (32mm) tailpiece. 1.5 gpm/5.7L/min. maximum flow rate.

PRODUCT FEATURES:

Pressure Compensating Aerator: Provides a constant

water flow of 1.5 gpm throughout the pressure range.

Solid Brass Construction: Durable - Excellent in high

use applications. Ideal for prolonged contact with water.

Ceramic Disc Valve Cartridges: Assures a lifetime of

drip-free performance.

Low Lead: Meets NSF Standard 61/Section 9 & Prop 65

lead requirements.

5401.000 Shown

MODEL NUMBER:

5400.000 Centerset Lavatory

1.5 gpm pressure compensating aerator. Less drain. Less pop-up hole. Less handles.

5401.000 Centerset Lavatory

1.5 gpm pressure compensating aerator. Pop-up drain. Less handles.

5402.000 Centerset Lavatory

1.5 gpm pressure compensating aerator. Grid strainer drain. Less handles.

Handles must be ordered separately.

SUGGESTED SPECIFICATION:

4" centerset lavatory faucet shall be cast brass construction with all brass shank nuts and coupling nuts. Shall feature water-conserving 1.5 gpm/5.7L/min. pressure compensating aerator. Shall also feature 1/4 turn washerless ceramic disc valve cartridges. Fitting shall be American Standard Model # 540_.___.002 and handle kit # 0000.___.002.

56mm

(2-3/16)

76mm

(3)

90mm

(3-9/16)

137mm (5-3/8)

44mm

(1-3/4)

22mm (7/8) DIA.

FOR GROUND JOINT OR 1/2" O.D. SLIP CONNECTION

51mm

(2)

35mm

(1-3/8) MAX.

32mm (1-1/4)DIA. MOUNTING HOLES

102mm

(4)

TWO-HANDLE CENTERSET LAVATORY FAUCET

WITH CONVENTIONAL SPOUT

L35

HERITAGE

5400.000

Product Number

Description

Finish

5401.000

5402.000

Polished Chrome

002

Handles must be ordered separately.

CODES AND STANDARDS

These products meet or exceed the following codes and standards:

ASME A112.18.1 CSA B 125 NSF 61/Section 9

Meets the American Disabilities Act Guidelines and ANSI A117.1 Requirements for the physically challenged.

Wrist Blade

Lever

172H 172V

142H 142V

The above fittings will accept the following Amarilis-Series handles.

Centerset lavatory faucet. 1.5 gpm/5.7L/min pressure compensating aerator. Pop-up drain. Less handles.

Centerset lavatory faucet. 1.5 gpm/5.7L/min pressure compensating aerator. Grid strainer drain. Less handles.

Centerset lavatory faucet. 1.5 gpm/5.7L/min pressure compensating aerator. Less drain. Less handles.

Other Aerators Available:

Part Suffix

V15 L15 LV15 V05

Description

1.5 gpm Pressure Compensating Vandal-Resistant Aerator

1.5 gpm Pressure Compensating Laminar Flow

1.5 gpm Pressure Compensating Vandal-Resistant Laminar Flow Outlet

0.5 gpm Pressure Compensating Vandal-Resistant Spray

FLOW RATE*

GALLONS PER MINUTE

I N L E T P R E S SU R E ( PS I )

*Flow rates shown are for mixed hot and cold.

0.0

0.5

1.0

1.5

2.0

10080604020

TWO-HANDLE CENTERSET LAVATORY FAUCET

WITH CONVENTIONAL SPOUT

L36