™
Installation
Instructions
LAUREL™ TOILET SEAT
MODELS 5308.014, 5311.012
Thank you for selecting American-Standard...the benchmark
of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--please
read these instructions carefully before you begin.
TOILET SEAT
U.S. PAT. D-355,713
760027-100 Rev. B
1
Remove the paper from
both sides of the washer.
4
2
Attach washer to bottom of
hinge.
5
3
Place seat on bowl. Be
careful to center hinge over
holes in bowl.
6
Insert bolts in hinges. Attach the nut from below. Use a screwdriver to tighten
bolt.
7
Close the hinge covers.
CARE AND CLEANING...
When cleaning your toilet seat wash it with mild, soapy water: rinse the
seat thoroughly with clear water: and dry with a soft cloth.
Avoid detergents, disinfectants, or cleaning products in aerosol cans.
NEVER use abrasive scouring powders on your seat. Some bathroom
chemicals and cosmetics may damage the seat's finish. After installation,
check the tightness of the bolts from time to time to ensure a tight fit.
FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.
All product names listed herein are trademarks of American Standard Inc. unless otherwise noted.
©AMERICAN STANDARD INC. 2002
AMERICAN STANDARD
ONE-YEAR LIMITED WARRANTY
If inspection of this American Standard plumbing product, within one
year after its initial installation, confirms that it is defective in materials
or workmanship, American Standard will repair or, at its option,
exchange the product for a similar model.
This limited warranty does not apply to local building code
compliance; since local building codes vary considerably, the
purchaser of this product should check with a local building or
plumbing contractor to ensure local code compliance before
installation.
This warranty shall be void if the product has been moved from its
initial place of installation; if it has been subjected to faulty
maintenance, abuse, misuse, accident, or other damage; if it was not
installed in accordance with American Standard's instructions, or if it
has been modified in a manner inconsistent with the product as
shipped by American Standard.
American Standard's option to repair or exchange the product under
this warranty does not cover any labor or other costs of removal or
installation, nor shall American Standard be responsible for any other
incidental or consequential damages attributable to a product defect or
to the repair or exchange of a defective product, all of which are
expressly excluded from this warranty. (Some states or provinces do
not allow the exclusion or limitation of implied warranties, so this
exclusion may not apply to you.)
This warranty gives you specific legal rights. You may have other
statutory rights that vary from state to state or from province to
province, in which case this warranty does not affect such statutory
rights.
For service under this warranty, it is suggested that a claim be made
through the contractor or dealer from or through whom the product was
purchased, or that a service request (including a description of the
product model and of the defect) be sent to the following address:
For residents of the United States, warranty information
may also be obtained by calling the following
760027-100 Rev. B
In the United States:
American Standard Inc.,
P.O. Box 6820
Piscataway, New Jersey 08855
Attention: Director of Consumer Affairs
toll free number: (800) 442-1902
All product names listed herein are trademarks of American Standard Inc. unless otherwise noted.
In Canada:
American-Standard,
2480 Stanfield Rd.,
Mississauga, Ontario
Canada L4Y 1S2
Toll Free: (800) 387-0369
In Mexico:
Customer Service Manager
Ideal Standard, S.A. de C.V.
Via Morelos #330
Col. Santa Clara
Ecatepec 55540 Edo. Mexico
© American Standard Inc. 2002