American Standard 5089.024, 5089.052 User Manual

SAVONA™ BIDET

❑ 5089.024 For deck-mounted tting (illustrated)

• Vitreous china

• Flushing rim and vertical cleansing spray

• Integral soap/sponge deck

• Design-matched to Savona toilets

• Integral overow

• Two bolt caps

Shown with 8391.000 Amarilis Bidet tting with Lexington Handles 0000.902 (not included)

❑ 5089.052 For over-the-rim tting

• Vitreous china

• Punched for single hole, over-the-rim tting, less ushing rim and spray

• Integral soap/sponge deck

• Design-matched to Savona toilets

• Integral overow

• Two bolt caps

SAVONA™ BIDET

VITREOUS CHINA

Nominal Dimensions:

660 x 387 x 394mm (26" x 15-1/4" x 15-1/2")

Compliance Certications Meets or Exceeds the Following Specications:

• ASME A112.19.2M for Vitreous China Fixtures

To Be Specied:

❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Silver ❏ Fawn Beige ❏ Black

❏ Bidet Fitting*: ❏ Fitting Finish: ❏ Trap: ❏ Supplies with Stops:

* See faucet section for additional models available

SEE REVERSE FOR ROUGHING-IN DIMENSIONS

Revised 2/08

SAVONA™ BIDET

203mm

(8)

660mm

(26)

483mm

(19)

127mm

(5)

102mm

(4)

130mm

(5-1/8)

162mm

(6-3/8)

286mm (11-1/4)

394mm (15-1/2)

25mm

(1)

246mm

(9-3/4)

178mm

(7)

COUPLING NUT

ON FITTING

1-1/4 O.D. TAILPIECE (THRU FLOOR TRAPPING ONLY)

C/L OF (2) 10mm (3/8) DIA.

MOUNTING HOLES ON 7" CENTERS

SPRAY HOLE

1-1/4 O.D. TAILPIECE

1-1/4 O.D. WASTE OUTLET

3/8 N.P.T.

SUPPLIES

C/L OF BIDET

108mm

(4-1/4)

387mm (15-1/4)

FOOT OUTLINE

1-3/4 DIA. DRAIN OUTLET

SPRAY

C/L OF OFFSET WASTE

C/L OF 3/8 HOT AND COLD SUPPLY INLETS

273mm

(10-3/4)

235mm

(9-1/4) FOOT

159mm

(6-1/4)

89mm (3-1/2)

19mm

(3/4)

38mm (1-1/2)

76mm

(3) MIN.

29mm (1-1/8)

216mm (8-1/2)

381mm

(15)

102mm

(4)

102mm

(4)

102mm

(4)

VIEW "A" - "A" (WALL OUTLET DETAIL)

29mm (1-1/8) OFFSET OF WASTE OUTLET

"A"

FINISH ED WALL

FINISH ED FLOOR

660mm

(26)

483mm

(19)

127mm

(5)

102mm

(4)

130mm

(5-1/8)

178mm

(7)

286mm (11-1/4)

394mm (15-1/2)

25mm

(1)

246mm

(9-3/4)

178mm

(7)

3/8 FLEX C.W.T. SUPPLY

FROM FITTING

1-1/4 O.D. TAILPIECE (THRU FLOOR TRAPPING ONLY)

C/L OF (2) 10mm (3/8) DIA.

MOUNTING HOLES ON 7" CENTERS

1-1/4 O.D. TAILPIECE

1-1/4 O.D. WASTE OUTLET

3/8 N.P.T.

SUPPLIES

C/L OF BIDET

387mm

(15-1/4)

FOOT OUTLINE

1-3/4 DIA. DRAIN OUTLET

C/L OF OFFSET WASTE

273mm

(10-3/4)

235mm

(9-1/4)

FOOT

140mm

(5-1/2)

108mm (4-1/4)

76mm

(3) MIN.

29mm (1-1/8)

197mm

(7-3/4)

400mm (15-3/4)

102mm

(4)

VIEW "A" - "A" (WALL OUTLET DETAIL)

29mm (1-1/8) OFFSET OF WASTE OUTLET

"A"

FINISH ED WALL

FINISH ED FLOOR

VITREOUS CHINA

5089.024

For Deck-Mounted Fitting Variation

5089.052

For Over-the-Rim Fitting Variation

NOTES:

3/8 N.P.T. x 3/8 O.D. COMP. SUPPLIES, LESS VERTICAL RISERS

(SUPPLIED BY OTHERS).

THIS INSTALLATION REQUIRES A TRUE 1-1/4" BODIED “P” TRAP, A UNIVERSAL 1-1/4--1-1/2 IS NOT APPLICABLE.

▲ WALL OUTLET INSTALLATION. DRAIN TAILPIECE MUST BE CUT

TO 1-5/8 LG.

▼ DIMENSIONS SHOWN FOR LOCATION OF “P” TRAP ARE SUGGESTED.

■ THRU FLOOR OUTLET INSTALLATION.

“P” TR AP AND FIT TINGS NOT FURNISHED WITH BIDET AND MUST BE ORDERED SEPARATELY. BIDET FIT TING HAS TRANSFER VALVE FEATURE.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2 These measurements are subject to c hange or cancellation. No responsibility is assumed for use of superseded or voided leaet.

NOTES:

3/8 N.P.T. x 3/8 O.D. COMP. SUPPLIES, LESS VERTICAL RISERS

(SUPPLIED BY OTHERS).

THIS INSTALLATION REQUIRES A TRUE 1-1/4" BODIED “P” TRAP, A UNIVERSAL 1-1/4--1-1/2 IS NOT APPLICABLE.

▲ WALL OUTLET INSTALLATION. DRAIN TAILPIECE MUST BE CUT

TO 1-5/8 LG.

▼ DIMENSIONS SHOWN FOR LOCATION OF “P” TRAP ARE SUGGESTED.

■ THRU FLOOR OUTLET INSTALLATION.

“P” TR AP AND FIT TINGS NOT FURNISHED WITH BIDET AND MUST BE ORDERED SEPARATELY. BIDET FIT TING HAS TRANSFER VALVE FEATURE.