American Standard 4869.004, 4869.008 User Manual
REGALYN™ WALL-MOUNT SINK
8
(203mm)
18
(457mm)
C/L
4-1/8
(105mm)
7-5/8
(194mm)
3-3/4
(95mm)
12-1/2
(318mm)
31 (787mm)
34 (864mm)
11-1/4
(286mm)
2-3/4
(70mm)
10
(254mm)
8
(203mm)
4
(102mm)
20
(508mm)
10-1/2
(267mm)
4
(102mm)
FINISHED WALL
FINISHED FLOOR
SUPPLIES
AS REQ'D.
HANGER
POP-UP WASTE
OUTLET 1-1/4 O.D.
DRAIN PLUG
WASTE OUTLET
1-1/4 O.D. WASTE
*
*
*
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 ACCESSIBLE AND USABLE
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.
Top of front rim mounted 864mm (34") from finished floor.
BARRIER FREE
• Enameled Cast Iron
• Glossy porcelain nish
• Wall-hung installation
• Front overow
• One soap depression
• Supplied with wall hanger
• Choice of faucet holes on 4" or 8" centers
❏ 4869.008 Faucet holes on 8" (203mm) centers
❏ 4869.004 Faucet holes on 4" (102mm) centers
(shown)
Nominal Dimensions:
20" x 18"
(508 x 457mm)
Bowl sizes:
394mm (15-1/2") wide
251mm (9-7/8") front to back
152mm (6") deep
REGALYN™
WALL-MOUNT LAVATORY
ENAMELED CAST IRON
Compliance Certications Meets or Exceeds the Following Specications:
• ASME A112.19.1 for Cast Iron Plumbing Fixtures
To Be Specied:
❏ Color: ❏ White
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies with Stop:
❏ 1-1/4" Trap:
* See faucet section for additional models available
NOTES:
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P” TRAP
*
ARE SUGGESTED.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
IMPORTANT: Dimensions of xtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibilit y is
assumed for use of superseded or voided pages.
© 2008 AS America Inc.
M28
Revised 8/05
Loading...