American Standard 4867.004, 4867.008 User Manual

(203mm)

3-5/8

(92mm)

7-5/8

(194mm)

3-1/2

(89mm)

10-1/2

(267mm)

(432mm)

C/L

12-1/2

(318mm)

31 (787mm) 34 (864mm)

11-1/4

(286mm)

2-3/4

(70mm)

(254mm)

(203mm)

(102mm)

(483mm)

4 (102mm)

FINISHED WALL

FINISHED FLOOR

SUPPLIES AS REQ'D.

HANGER

POP-UP WASTE OUTLET 1-1/4 O.D.

DRAIN PLUG

WASTE OUTLET

1-1/4 O.D. WASTE

REGALYN™ WALL-MOUNT SINK

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES - CHECK LOCAL CODES.

Top of front rim mounted 864mm (34") from finished floor.

BARRIER FREE

• Enameled Cast Iron

• Glossy porcelain nish

• Wall-hung installation

• Front overow

• One soap depression

• Supplied with wall hanger

• Choice of faucet holes on 4" or 8" centers

❏ 4867.008 Faucet holes on 8" (203mm) centers

❏ 4867.004 Faucet holes on 4" (102mm) centers

(shown)

Nominal Dimensions:

19" x 17" (483 x 432mm)

Bowl sizes:

394mm (15-1/2") wide 251mm (9-7/8") front to back 152mm (6") deep

REGALYN™

WALL-MOUNT LAVATORY

ENAMELED CAST IRON

Compliance Certications Meets or Exceeds the Following Specications:

• ASME A112.19.1 for Cast Iron Plumbing Fixtures

To Be Specied:

❏ Color: ❏ White ❏ Faucet*: ❏ Faucet Finish: ❏ Supplies with Stop: ❏ 1-1/4" Trap:

* See faucet section for additional models available

NOTES:

DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P” TRAP

ARE SUGGESTED. PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS. FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibilit y is assumed for use of superseded or voided pages.

M29

Revised 8/05