American Standard 2234.015, 481310-100 User Manual

MADERA™ ELONGATED 10" ROUGH

229mm

(9)

1-1/ 2 SPUD

121mm

(4-3/ 4)

651mm (25-5 /8)

359mm (14-1 /8)

470mm (18-1 /2)

381mm

(15)

346mm (13-5 /8)

127mm (5)

254mm

(10)

13mm (1/2)

44mm (1-3/ 4)

102mm (4)

768mm (30-1 /4)

C/L OF SE AT POS T HOLE S 140 mm (5- 1/2) CEN TER

FINIS HED WALL

FINIS HED FLOOR

C/L O F OUTLET

1" N. P.T. OR 1 " C.W.T. SUPPLY TO FL USH VALVE

• Flush valve toilet

• Vitreous china

• Low-consumption (6.0 Lpf/1.6 gpf)

• 10" roughing-in

• Elongated bowl

• Direct-fed siphon jet action

• Fully glazed 2-1/8" trapway

• 11" x 13" water surface area

• 1-1/2" top spud

• 2 bolt caps

• 100% factory ush tested

❏ 2234.015 Elongated bowl only, top spud

Component Parts:

❏ 047007-0070A Inlet spud (furnished with bowl) ❏ 481310-100 Bolt caps with retainers

(furnished with bowl)

MADERA™ ELONGATED

FLUSH VALVE TOILET

VITREOUS CHINA

Nominal Dimensions:

768 x 381 x 359mm (30-1/4" x 15" x 14-1/8")

Recommended working pressure – between 25 psi at valve when ushing and 80 psi static

Fixture only, less seat, bolt caps and ush valve

Compliance Certications Meets or Exceeds the Following Specications:

• ASME A112.19.2 for Vitreous China Fixtures

To Be Specied:

❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Seat: 5901.100 American Standard Seat ❏ 5901.110 American Standard Seat with EverClean ❏ Alternate Seat: 5905.100 Heavy Duty

American Standard Seat

❏ 5905.110 Heavy Duty American Standard Seat with

EverClean

❏ Flush Valve: ❏ American Standard Selectronic™ #6065.161.002

DC Power (Top Spud)

NOTES:

PRODUCT 2234.015 SHOWN. TO COMPLY WITH AREA CODE GOVERNING THE HEIGHT OF VACUUM BREAKER ON FLUSH VALVE, THE PLUMBER MUST VERIFY DIMENSIONS SHOWN FOR SUPPLY ROUGHING. FLUSH VALVE NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 254MM (10") FROM FINISHED WALL TO C/L OF OUTLET.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19. 2. These measurements are subject to change or cancellation. No responsibilit y is assumed for use of superseded or voided pages.

M63

Revised 11/08