© 2005 American Standard Inc.
WILLIAMSBURG CHAMPION®
ROUND FRONT TOILET
VITREOUS CHINA
WILLIAMSBURG CHAMPION®
ROUND FRONT TOILET
❏ 3110.016 Round Front Bowl
❏ 4281.702 Tank
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• Features Champion® Flushing System
performance platform
• 3” non-adjustable, flapper-free flush valve
• Round Front siphon action jetted bowl
• 2-3/8” fully-glazed trapway
• Speed Connect™ tank/bowl coupling system
• Chrome-plated trip lever
• Sweeping pier on bowl
• 100% factory flush tested
• 2 bolt caps
• 10 year warranty
Nominal Dimensions:
28-3/8" x 18-7/8" x 33-1/2"
(721 x 479 x 851mm)
Fixture only, seat and supply by others
Compliance Certifications Meets or Exceeds the Following Specifications:
• ASME A112.19.2M (and 19.6M) for Vitreous China
Fixtures - includes Flush Performance, Ball Pass
Diameter, Trap Seal Depth and all Dimensions
• Los Angeles Department of Water and Power
Supplementary Purchase Specification for NonAdjustability - July, 2003 revision
To Be Specified
❏ Color:
❏ Seat: (please specify color)
❏ Champion® Slow Close Round Front #5330.010
❏ Rise & Shine Round Front #5322.011
❏ Laurel Round Front #5308.014
❏ Supply with stop:
FINISHED WALL
19mm ± 6mm
(1 ± 1/4)
387mm
(15-1/4)
FINISHED
FLOOR
305mm
(12)
721mm
(28-3/8)
C/L OF OUTLET
83mm
(3-1/4)
216mm
(8-1/2)
419mm
(16-1/2)
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
362mm
(14-1/4)
264mm
(10-3/8)
16mm
(5/8)
851mm
(33-1/2)
479mm
(18-7/8)
SUPPLY
AS
REQ'D
254mm
(10)
152mm
(6)
254mm
(10)
356mm
(14)
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12")
FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances
established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is assumed for use
of superseded or voided pages.
03/05