American Standard 4021.513, 2832.128, 3014.128, 4021.613 User Manual

CADET® 3 FloWise® ELONGATED TOILET

Certiﬁed by

IAPMO R&T

❑ 2832.128

• Vitreous china

• Meets denition for HET (High Efciency Toilet)

• High efciency (4.8 Lpf/1.28 gpf)

• Certied in EPA Water Sense Program

• Qualies in LEEDS Program

• EverClean stain- and odor-causing bacteria, mold, and mildew on the surface

• Featuring the

• Elongated siphon action jetted bowl

• Fully-glazed 2-1/8" trapway

• Generous 9" x 8" water surface area

• Close-coupled tank with at tank cover for superior storage

• Oversized 3" ush valve with chemical resistant apper

• Chrome trip lever

• Speed Connect

• Sanitary dam on bowl with four point tank stabilization

• 2 color-matched bolt caps

• 100% factory ush tested

• 5 year warranty

surface inhibits the growth of

Cadet® 3 Flushing System

tank-to-bowl coupling system

CADET® 3 FloWise

ELONGATED TOILET

VITREOUS CHINA

❑ 3014.128 Elongated Bowl ❑ 4021.128 Tank

Nominal Dimensions: 768 x 438 x 733mm (30-1/4" x 17-1/4" x 28-7/8")

Fixture only, seat and supply by others

Alternative Tank Congurations Available:

❑ 4021.513 Tank complete with Aquaguard Liner ❑ 4021.613 Tank complete with tank cover

locking device ❑ 4021.713 Tank complete with Aquaguard Liner and tank cover locking device ❑ 4021.813 Tank complete with trip lever located on right side ❑ 4021.913 Tank complete with tank cover locking device and trip lever located on right side ❑ 4021.953 Tank complete with Aquaguard Liner, tank cover locking device and trip lever located

on right side

Compliance Certications Meets or Exceeds the Following Specications:

• ASME A112.19.2M for Vitreous China Fixtures includes Flush Performance, Trap Seal Depth

and all Dimensions

• Los Angeles Department of Water and Power Supplementary Purchase Specication for Non-Adjustability

• Certied in EPA WaterSense HET program

SEE REVERSE FOR ADDITIONAL ROUGHING-IN DIMENSIONS

To Be Specied:

❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black ❏ Seat: #5325.010 Elongated Champion® Slow Close

solid plastic seat and cover with easy lift off feature ❏ Seat: #5284.016 Elongated EverClean® solid plastic

seat and cover

❏ Seat: #5321.110 EverClean® Elongated Seat with

Slow Close Snap-Off Hinges

❏ Supply with stop:

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET. SUPPLY NOT INCLUDED WITH FIX TURE AND MUST BE ORDERED SEPARATELY.

DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of xtures are nominal and may var y within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

K77

Revised 2/08

FINISHED WALL

FINISHED FLOOR

C/L OF OUTLET

SUPPLY

REQ'D.

216mm

(8-1/2)

768mm (30-1/4)

25mm ± 6mm (1 ± 1/4)

102mm

(4)

470mm (18-1/2)

438mm (17-1/4)

733mm (28-7/8)

381mm

(15)

*203mm

(8)

305mm

(12)

348mm

(13-11/16)

216mm

(8-1/2)

C/L OF SEAT POST HOLES 140mm (5-1/2 CENTERS)

352mm (13-7/8)

*152mm (6)

237mm

(9-5/16)