American Standard 2800.224, 2800.222 User Manual

Williamsburg
DECK-MOUNT TUB FILLER
WITH BRASS TEAPOT SPOUT
MODEL NUMBER:
2800.222 Deck-Mount Tub Filler
2 sets of handles (metal levers and porcelain levers).
2800.224 Deck-Mount Tub Filler
Metal Lever handles.
TM
2800.224 Shown
3-3/8
2-3/8D.
32mm
102mm
(4)
3/4-14 MALE
N.P.T. INLETS
(H)
(1-1/4)DIA. DRILLED HOLE
26mm
(1-1/16)
DIA.
(can be field cut
for 6-1/2" installations)
GENERAL DESCRIPTION:
Durable cast brass spout. Rigid brass and copper waterway below deck provided for 12" installations (can be cut for 6-1/2" installations). Brass valve bodies with 3/4" NPT inlets. 1/4 turn washerless ceramic disc valve cartridges - reversible for use with either lever or cross handles.
214mm
(8-7/16)
108mm
(4-1/4)
305mm
(12)
74mm (3)DIA.
32mm (1-1/4) MAX. TYP
68mm
(2-2/3)
76mm
(3)
(C)
PRODUCT FEATURES:
Brass Construction: Durable. Ideal for prolonged contact
Ceramic Disc Valving: Assures a lifetime of drip-free
performance.
Exclusive Handle Alignment System: Allows fine
tuning of handle position.
Choice of Finishes: Polished Chrome, Polished Brass, or
Polished Chrome with Brass Mixage.
SUGGESTED SPECIFICATION:
Two handle deck-mount tub filler shall feature cast brass construction with brass and copper waterway. Shall also feature 1/4 turn washerless ceramic disc valve cartridges that are reversible for use with cross or lever handles. Fitting shall be American Standard Model #2800.____.___.
Williamsburg
DECK-MOUNT TUB FILLER
WITH BRASS TEAPOT SPOUT
TM
CODES AND STANDARDS
These products meet or exceed the following codes and standards:
NSF14 ASME A112.18.1M CSA B125
Product Number
2800.222
2800.224 Deck mount tub filler. Metal Lever handles.
Description
Deck mount tub filler. 2 sets of handles. (metal levers and porcelain levers)
FLOW RATE*
25 20 15 10
5
GALLONS PER MINUTE
0
*Flow rates shown are for mixed hot and cold.
INLET PRESSURE (PSI)
Finish Options
Polished
Chrome
002
Polished
Brass
099
N/AN/A
80604020
Chrome w/Brass
Mixage
299
N/A
N/A = NOT AVAILABLE
Meets the American Disabilities Act Guidelines and ANSI A117.1 Requirements for the physically challenged.
Loading...