American Standard 2794.119 User Manual

STUDIO® ACTIVATE™ CONCEALED TRAPWAY

CT GUIDELINES

RIGHT HEIGHT® ELONGATED TOILET

BARRIER FREE

STUDIO® ACTIVATE™ CONCEALED TRAPWAY RIGHT HEIGHT® ELONGATED TOILET WITH SEAT

❑ 2794.119 Right Height

• LXP (Luxury Performance) Toilet with touchless ush activation

• Combination bowl and tank, with seat

• 12" (305mm) rough-in

• Siphon action jetted bowl with smooth-sided, concealed trapway

• Ultra-low consumption (1.28 gpf/4.8 Lpf) utilizes 20% less water

• Meets EPA WaterSense® Criteria

• EverClean® Surface included

• PowerWash® rim scrubs bowl with each ush

• 16-1/2" (419mm) rim height

• Fully-glazed 2-1/8" trapway

• Oversized 3" ush valve

• Generous 9" x 8" water surface area

• Includes Duroplast slow close seat and cover with concealed seat ring and easy lift-off feature for simple removal and reattachment for cleaning

• Wave hand actuator with manual override ush button

• Powered by 4 AA batteries (included)

• 2 color matched bolt hole covers

• Limited lifetime warranty on chinaware, a limited 5 year warranty on all mechanical parts of the toilet, 1 year warranty on electronic parts and a limited 1 year warranty on the toilet seat

• Design coordinates with Studio® and

Boulevard® lavatories

Elongated Toilet

VITREOUS CHINA

SEE REVERSE FOR ROUGHING-IN DIMENSIONS

❑ 3075 .12 0 Right Height

Elongated bowl with

5218.210 seat

Nominal Dimensions:

768 x 399 x 781mm (30-1/4" x 15-3/4" x 30-3/4") Fixture with seat, supply by others

❑ 4000.119 Tank complete with coupling components

and tank trim

❑ 5218.110 / 5218.210 Elongated molded seat

Compliance Certications Meets or Exceeds the Following Specications:

• ASME A112.19.2-2008/CSA B45.1-08 for Vitreous China Fixtures

MEETS THE AMERICANS WITH DISABILITIES A AND ICC ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK LOCAL CODES.

K2-215

Certiﬁed by

IAPMO R&T

spec_ 2794.119 Rev. C 5/15

BARRIER FREE

1-1/8"

(29mm)

2-5/8"

(67mm)

FINISHED WALL

8-3/4"

(221mm)

STUDIO® ACTIVATE™ CONCEALED TRAPWAY

30-1/4"

(768mm)

C/L OF SEAT POST HOLES 5-1/2" (140mm) CENTERS

18-1/2"

(470mm)

RIGHT HEIGHT® ELONGATED TOILET

VITREOUS CHINA

15-3/4"

(399mm)

14"

SUPPLY AS

REQUIRED

(position 1 or

position 2)

(356mm)

30-3/4"

(781mm)

16-1/2"

(419mm)

3-1/8"

(81mm)

4-1/2"

(114mm)

IMPORTANT: Water supply on the wall is required at 2-1/4" or 8" from centerline of the toilet (see rough-in). First suggested position is hidden behind the toilet. The geometry of the toilet gives space for this installation. The second suggested position is next to the toilet. Between these two positions, the space for the supply between wall and toilet is limited to 4-1/2". In this case, check your supply and hose dimensions.

7-1/2"

(191mm)

12"

(305mm)

13-11/16" (347mm)

C/L OF OUTLET

5-1/2"

(140mm)

FINISHED

FLOOR

(204mm)

(309mm)

(152mm)

12-3/16"

2-1/4"

(57mm)

BACK VIEW

(for reference)

NOTES:

THIS TOILET IS DESIGNED TO ROUGH -IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET. SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.

DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of xtures are nominal and may var y within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

K2-216

spec_ 2794.119 Rev. C 5/15