American Standard 2776.118W, 2776.218W User Manual

CADET™ 5' x 32" with INTEGRAL APRON WHIRLPOOL AND BATHING POOL

❏ 2776.218W Whirlpool featuring System I,

Left Hand Outlet

❏ 2776.118W Whirlpool featuring System I,

Right Hand Outlet

Product Features:

• Acrylic with berglass reinforcement

• Integral apron with removable access panel

• Integral 3-sided tile/water retention ange

• Form-tted back rest

• Dual, molded in arm rests

• 1.25 HP single speed, self-draining pump/motor

• Factory installed power cord with plug

• Eight multi-directional and ow-adjustable jets including:

- Two foot jets

- Four body massage jets

- Two recessed back-rest jets

• Deck-mounted air switch On/Off

• Two silent air volume controls

• Factory installed and tested whirlpool system

CADET™ 5' x 32" w/INTEGRAL APRON

WHIRLPOOL AND BATHING POOL

HIGH GLOSS

EverClean® Whirlpool Massage featuring System I

❏ 2776.218WC Whirlpool featuring System I,

Left Hand Outlet

❏ 2776.118WC Whirlpool featuring System I,

Right Hand Outlet

• Same as above except with the EverClean System

❏ 2776.102 Bathing Pool, Right Hand Outlet ❏ 2776.202 Bathing Pool, Left Hand Outlet

Nominal Dimensions: 1521 x 813 x 508mm (59-7/8" x 32" x 20")

American Standard whirlpools and air baths with EverClean® incorporate a patented silver-ion additive right into the circulation piping to protect the pipes from mold, mildew, algae and fungus that could cause deterioration or staining of the pipes.

To Be Specied - Required:

❏ Color: ❏ Bath Filler: (specify nish) ❏ Bath Drain: 1583.470 (specify nish)

To Be Specied - Optional:

❏ Bath Caddie: 9533.100 (in Chrome only) ❏ Jet Trim Ring Kit: 9860.200-two per kit (specify nish)

For color/nish availability and other faucet choices, please see the Product Selector and Pricing Guide.

Compliance Certications Meets or Exceeds the Following Specications:

• Underwriters Laboratories - Hydromassage Bathtubs UL 1795

• ASME A112.19.7M for Whirlpool Appliances

• ANSI Z124.1 for Plastic Bathtubs

• ASTM E162 for Flammability

• NFPA 258 for Smoke Density

SEE REVERSE FOR PRODUCT DIMENSIONS AND SPECIFICATIONS

H65

Revised 2/08

CADET™ 5' x 32" w/INTEGRAL APRON

19-3/4

(502mm)

7/8 WATER

RETENTION

FLANGE

(3 SIDES)

(508mm)

1-1/2 O.D.TAILPIECE

BATH

SUPPORT

MATERIAL

ROUGH

FLOOR

FINISHED

WALL

TOP OF

DECK

59-7/8

(1521mm)

(813mm)

WATER RETENTION FLANGE (3 SIDES)

7-3/4

(197mm)

(305mm)

2-3/8

(60mm)

(8) JETS

2-3/4

(70mm)

CUTOUT IN FLOOR FOR DRAIN

PUMP

FINISHED

WALL

OPTIONAL TO

FINISHED FLOOR

USUALLY BETWEEN

65 & 78

(1651 & 1981mm)

C/L OF OVE RFLOW

C/L OF SPOUT

C/L OF VALVES

C/L OF SHOWER ARM

2-3/4

(70mm)

4-5/8

(117mm)

1-1/2 N.P.T.M.

THREADS

3/4

(19mm)

(229 mm)

C/L OF

SUPPLIES

C/L OF DRAIN

SEE FITTING

SPECS FOR

DIMENSIONS

(2) AIR VALVES

ON/OFF SWITCH

ACCESS TO PUMP/MOTOR THROUGH REMOVABLE FRONT ACCESS PANEL

UNDERSIDE OF DECK

14-3/4

(375mm)

LEVELING STRINGER NOT FOR SUPPORT

TILING FLANGE

(305mm)

OPT.

(102mm)

14-3/4

(375mm)

WATER RETENTION FLANGE (3 SIDES)

UNDERSIDE OF DECK

19-3/4

(502mm)

7/8 WATER

RETENTION

FLANGE

(3 SIDES)

(508mm)

1-1/2 O.D.TAILPIECE

BATH

SUPPORT

MATERIAL

LEVELING STRINGER

NOT FOR SUPPORT

ROUGH

FLOOR

TOP OF

DECK

59-7/8

(1521mm)

(813mm)

7-3/4

(197mm)

(305mm)

2-3/8

(60mm)

2-3/4

(70mm)

CUTOUT IN FLOOR FOR DRAIN

FINISHED

WALL

(305mm) OPT.

OPTIONAL TO

FINISHED FLOOR

USUALLY BETWEEN

65 & 78

(1651 & 1981mm)

C/L OF OVE RFLOW

(102 mm)

C/L OF SPOUT

C/L OF VALVES

C/L OF SHOWER ARM

2-3/4

(70mm)

4-5/8

(117mm)

1-1/2 N.P.T.M.

THREADS

3/4

(19mm)

(229 mm)

C/L OF

SUPPLIES

C/L OF DRAIN

SEE FITTING

SPECS FOR

DIMENSIONS

FINISHED

WALL

SYSTEM I P UM P

GENERAL SPECIFICATIONS FOR 2776 WHIRLPOOL

WHIRLPOOL ELECTRICAL SPECIFICATIONS

1.25 HP, 9.9 AMPS,120V.

59-7/8 x 32 x 20 (1521 x 813 x 508mm)

115 Lbs. (52 Kg.)

574 Lbs. (258 Kg.)

55 Gal. (208 L.)

45 Gal. (171 L.)

20 x 40 (508 x 1016mm)

26 x 53-1/2 (660 x 1359mm)

14-1/2 (368mm)

43 Lbs./Sq.Ft. (208 Kgs./Sq.m)

20.8

35.3

INSTALLED SIZE WEIGHT WEIGHT w/WATER GAL. TO OVERFLOW WHIRLPOOL MIN. OPERATING VOL. BATHING WELL AT SUMP BATHING WELL AT RIM WATER DEPTH TO OVERFLOW FLOOR LOADING (PROJECTED AREA) PTS. CUBE (FT3)

GENERAL SPECIFICATIONS FOR 2776 BATHING POOL

59-7/8 x 32 x 20 (1521 x 813 x 508mm)

75 Lbs. (34 Kg.)

525 Lbs. (236 Kg.)

54 Gal. (205 L.)

20 x 40 (508 x 1016mm)

26 x 53-1/2 (660 x 1359mm)

14-1/2 (368mm)

39 Lbs./Sq.Ft. (191 Kgs./Sq.m)

20.8

35.3

INSTALLED SIZE WEIGHT WEIGHT w/WATER GAL. TO OVERFLOW BATHING WELL AT SUMP BATHING WELL AT RIM WATER DEPTH TO OVERFLOW FLOOR LOADING (PROJECTED AREA) PTS. CUBE (FT3)

WHIRLPOOL AND BATHING POOL

HIGH GLOSS

NOTES:

BATH TO BE INSTALLED ABOVE FLOOR LINE AS A RECESS INSTALLATION. SUPPORT OF BATH BY SUMP BEDDING. SUPPORT AND ENCLOSING MATERIAL BY OTHERS.

■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.

LEFT HAND OUTLET SHOWN, RIGHT HAND REVERSE DIMENSIONS (2776.118).

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standards Z124.1 and A112.19.7. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

H66

Revised 2/08